Abstract:High temperature REBCO superconducting tapes are very promising for high-field magnets. With high magnetic field application there are high electro-mechanical forces, and thus concern for mechanical damage. Due to the presence of large screening currents and composite structure of the tape, the mechanical design of these magnets are not straight forward. In addition, many contemporary designs use insulated winding. In this work we develop a novel two-dimensional axisymmetric finite element tool programmed in MATLAB that assumes the displacement field within linear elastic range. The stack of pancakes and a large number of REBCO tape turns are approximated as an an-isotropic bulk hollow cylinder. Our results agree with uni-axial stress experiments in literature, validating the bulk approximation. Here, we study the following configuration. The current is first ramp up to below the critical current and we calculate the screening currents and the forces that they cause using the MEMEP model. This electromagnetic model can now take insulated magnets into account. As a case study 32 T REBCO superconductor magnet is simulated numerically. We have done complete mechanical analysis of the magnet by including the axial and shear mechanical quantities for each pancake unlike previous work where only radial and circumferential quantities are focused. Effect on mechanical quantities without screening current is also calculated and compared. It is shown that including screening current induced field strongly affect the mechanical quantities, specially the shear stress. The latter might be the critical quantity for certain magnet configurations. Additionally, in order to overcome high stresses, a stiff over banding of different material is considered and numerically modelled which significantly reduces the mechanical stresses. The FE based model developed is efficient to calculate the mechanical behaviour of any general superconductor magnet and its devices.

Calculation of mechanical deformation of magnetic materials in electromagnetic devices

Finite Element Analysis of Gradient Z-Coil Induced Eddy Currents in a Permanent MRI Magnet

Numerical Modeling and Analysis of an Electromagnetic Device Using a Weakly Coupled Magnetostatic-Mechanical Formulation and the 2D Finite Element Method

Finite element analysis of magneto-mechanical coupled phenomena in magnetostrictive materials

Unbalanced Magnetic Force Calculation Based on Subdomain and Magnetic Circuit Hybrid Model in SPM Machines

Magnetoelastic Mechanical Behavior Of Rectangular Ferromagnetic Plates With Nonlinear Magnetization

A three-field based finite element analysis for a class of magnetoelastic materials

A coupled BEM-FEM method for finite strain magneto-elastic boundary-value problems

Numerical Simulation of Electromagnetic Nondestructive Testing Technology for Elasto–Plastic Deformation of Ferromagnetic Materials Based on Magneto–Mechanical Coupling Effect

A General Magnetoelastic Coupling Theory of Deformable Magnetized Medium Including Magnetic Forces and Magnetostriction Effects

A fully-coupled nonlinear magnetoelastic thin shell formulation

Magnetoelastic Model Of Magnetizable Media

Simulation of deformations in magnetic media by the movable cellular automata method

Phase-Field Modeling of Fracture for Ferromagnetic Materials through Maxwell's Equation

Modelling the mechanics of 32 T REBCO superconductor magnet using numerical simulation

A Solid-Shell Model of Hard-Magnetic Soft Materials

Embedding a Magnetoelastic Material Model in a Coupled Magnetomechanical Finite-Element Solver

Study of Magnetomechanical Non-Linear Deformation of Ferromagnetic Materials: Theory and Experiment

A Finite Element Based Real-Space Phase Field Model for Domain Evolution of Ferromagnetic Materials

A numerical simulation method of residual magnetic field signals for evaluating deformation-induced stress concentration in ferromagnetic materials