Abstract:In the absence of flux measurements, techniques of field orientations depend on motor parameters, particularly on rotor resistances. During operation in flux-oriented mode, online continuous estimation of harmonic and fundamental rotor resistances is important for multiphase IM. To limit the core saturation and to achieve the synchronous and aligned air-gap flux density distribution, the harmonic plane is based on magnetizing flux-oriented control (MFOC) whereas the fundamental plane is taken as rotor flux-oriented control (RFOC). Mismatch harmonic and fundamental resistances trigger deviations in the rotor and magnetizing flux and also cause misalignment in the resultant induced electromotive force (EMF) waveform which could, in turn, be the reason for over-excitation and under-excitation. This article formulates the simultaneous online identification of rotor resistances for particularly MFOC harmonic plane while the fundamental plane is RFOC based on the dot product of rotor flux and stator current for making a model reference adaptive system (MRAS). Mismatched stator resistance and dead time of inverter have a negligible effect on the reference model during steady state. Convergence and steady-state performance can be acquired for a variation of load conditions particularly at heavy loading. The validation of the proposed approach is verified through simulation and experiment results by incorporating a multiphase platform consisting of a seven-phase induction machine.

Losses in three-phase induction machines fed by PWM converter

Analytical Model of Eddy Current Loss in Windings of Permanent-Magnet Machines Accounting for Load

Multiplane Rotor Resistance Online Estimation Strategy for Multiphase Induction Machine under Nonsinusoidal Power Supply

Slip Determination Considering Mismatched Fundamental and Harmonic Rotor Resistance for Multiphase Induction Machines under Non Sinusoidal Supply

Estimation of Iron Losses in Induction Motors: Calculation Method, Results, and Analysis

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

Power Electronic Load System for Motor Drivers Testing Considering Motor Faulty Status Simulation

A double Fourier analysis development of THD for PWM inverters: A theoretical method for motor loss minimization

Core Loss Equivalent Resistance Modeling of Small- and Medium-Sized Converter-Fed Induction Motors Considering Supply and Spatial Harmonics

Research of the Influence of Different Pwm Inverters on the Iron Losses for Induction Motors

Non-sinusoidal Output Voltage for Multiphase Variable Speed Drives with Space Vector PWM

Iron Loss Evaluation And Comparison In Application Of Reduced Common Mode Voltage Pwm Methods

Calculation and measurement of motor and converter losses according to IEC 61800-9-2 ED2

Nonsinusoidal Power Supply Analysis for Concentrated-Full-Pitch-Winding Multiphase Induction Motor

Influence of the inverter characteristics on the harmonic losses in PWM fed traction motors

Profiling the Eddy Current Losses Variations of High-Speed Permanent Magnet Machines in Plug-in Hybrid Electric Vehicles

Influence Of The Inverter Characteristics On The Harmonic Losses

An Analytical Iron Loss Calculation Model of Inverter-Fed Induction Motors Considering Supply and Slot Harmonics

Iron loss analysis of interior permanent-magnet synchronous motors-variation of main loss factors due to driving condition

Co-analysis of Electromagnetic Loss of the High Speed PMSM Driven by the PWM Inverter

Fast Calculation of Carrier Harmonic Loss in Permanent Magnet of IPMSM Under PWM VSI Supply Over Entire Working Range