Abstract:Continuous linear commands are widely executed in computer numerical control (CNC) machining. The tangential discontinuity at the junction of consecutive segments restricts the machining efficiency and deteriorates the surface quality. Corners of linear segments have been successfully blended by inserting parametric splines. There still exists challenges when the common methods are employed in the line-segment commands due to part of the following restrictions: (1) the stringent computation for iteratively calculating the arc-length; (2) the unwanted feedrate fluctuation; (3) the oversize contour deviation for separately completing curve fitting and velocity planning. A novel smoothing method based on a clothoid pair to synchronously accomplish planning of geometry blending and speed scheduling is proposed, the spline parameter of which is arc-length-parameterized. The arc-length, curvature extreme, and geometric shape of the transition curve are analytically expressed by the transition length. On these bases, the transition curve and the velocity profile are concurrently constructed based on the predefined approximation error, the reachable velocity, and normal kinematic constraints in the look-ahead stage. Then, a real-time interpolation scheduling is developed to overcome the crossing difficulties between the linear and parametric segments. Compared with existing methods, the proposed method can analytically calculate the length of transition curves for the arc-length-parameterized expression form. Furthermore, the feedrate fluctuation is eliminated in the fine interpolation. Moreover, the overlarge contour derivation produced by corner smoothing is significantly avoided. It is friendlier to the CNC system for the on-line executing smooth motion since more computing resources can be released to handle other tasks, smoother motion can be achieved and higher contour accuracy can be obtained. The experimental results also demonstrate its practicability and reliability.

Segmentation of Planar Curves into Straight-Line Segments and Elliptical Arcs

Curve Fitting and Fairing Using Conic Splines

Efficient Circular Arc Interpolation Based on Active Tolerance Control.

A local fitting algorithm for converting planar curves to B-splines

A Variational Approach for Feature-Aware B-spline Curve Design on Surface Meshes

SLICING DATA PROCESSING AND GLOBAL OPTIMIZATION OF FEATURE CURVE IN REVERSE ENGINEERING

A smoothing method of continuous line-segment path in CNC machining based on real-time transformation of interpolation points

A Closed-Loop Chord Error Control and Segmentation Method for Planar NURBS Curve

Curve Reconstruction Based on an Interval B-spline Curve.

A Newly Developed Corner Smoothing Methodology Based on Clothoid Splines for High Speed Machine Tools

An Efficient Method for Tracing Planar Implicit Curves

Corner Detection and Arc Approximation of Planar Data Set

Non-equidistant Scanning Path Generation for the Evaluation of Surface Curvature in Metrological Scanning Probe Microscopes

A global smoothing method with geometric continuity conditions of piecewise curve fitting for toolpath of massive micro-line segments in CNC

Analytical Curvature-Continuous Dual-Bézier Corner Transition for Five-Axis Linear Tool Path

Application of a curvature adjusted method in image segmentation

Boundary Evaluation for Interval Bézier Curve

Enhanced Curve-Based Segmentation Method for Point Clouds of Curved and Irregular Structures

A Curvature-Continuous Transition Method with Axis High-Order Kinematic Limitations along Linear Segments

Developable mesh segmentation by detecting curve-like features on Gauss images

An Analytical Method for Corner Smoothing of Five-Axis Linear Paths Using the Conformal Geometric Algebra