Abstract:Highlights • Devise a MLKC scheme for the model-less control of redundant robot manipulators. • Handle joint-physical-limit and joint-angular-drift problems simultaneously. • Present a Jacobian estimator designed based on zeroing dynamics. • Develop a discrete-time version of the MLKC scheme to facilitate the deployment of the control system. Model-free tracking control methods have been developed for redundant robotic manipulators with unknown kinematic or dynamic models. However, most existing works have not considered the problems of joint physical limits and joint angular drift. Joint angular drift refers to the phenomenon that the joint angles of a redundant manipulator are different from their initial state when the end-effector of the manipulator returns to its initial position. Therefore, this article proposes a model-free scheme for the tracking control of redundant manipulators as well as the avoidance of joint physical limits and joint angular drift. The proposed method aims to overcome these challenges by formulating the inverse kinematics problem as a constrained optimization problem, which incorporates the avoidance of joint angular drift into the optimization objective and takes the joint physical limits as a constraint. At the same time, an online Jacobian estimator is designed to observe the state of the manipulator. Specifically, it can estimate the Jacobian matrix of a redundant manipulator in real-time during the operation by fully exploiting the sensory data, without knowing the analytic robot model. Then, the optimization problem is integrated with the Jacobian estimator and solved by a discrete-time algorithm. Theoretical analysis is conducted to prove the stability and convergence of the proposed method. Moreover, the efficacy, practicability and superiority of the proposed method are supported by simulations and experiments based on different redundant manipulators.

Tracking control for underactuated non-minimum phase multibody systems

A Unified Approach for Second-Order Control of the Manipulator With Joint Physical Constraints

Fast and Accurate Motion Tracking of a Linear Motor System under Kinematic and Dynamic Constraints: an Integrated Planning and Control Approach

Output tracking for a non-minimum phase robotic manipulator

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Fast and Accurate Tracking Control of Robotic Manipulators Subject to State Constraints and Input Saturation by Effectively Integrating Planning Strategies

New Approach of Tracking Control for a Class of Non-Minimum Phase Linear Systems

Design and Implementation Based on Backstepping for Tracking Control of Nonholonomic Mobile Robots

A Performance Oriented Multi-Loop Constrained Adaptive Robust Tracking Control of One-Degree-of-freedom Mechanical Systems: Theory and Experiments.

Input-constrained funnel control of nonlinear systems

6-DOF Multi-Constrained Adaptive Tracking Control for Noncooperative Space Target.

Trajectory tracking control for nonholonomic mobile robots under arbitrary reference input

Nonlinear Control for a Class of Underactuated Mechanical Systems

Model-free tracking control of complex dynamical trajectories with machine learning

A new perspective on the tracking control of nonlinear structural and mechanical systems

Dynamic Model Based Nonlinear Tracking Control of a Planar Parallel Manipulator

Model-free kinematic control of redundant manipulators with simultaneous joint-physical-limit and joint-angular-drift handling

Adaptive Tracking Control of Coordinated Nonholonomic Mobile Manipulators

Event-triggered Learning-Based Robust Tracking Control for Robotic Manipulators with Uncertain Dynamics and Non-Zero Equilibrium

Nonlinear Optimal Control for Robot Manipulator Trajectory Tracking