Abstract:Mathematics and Mechanics of Solids, Ahead of Print. Cylindrical shells curved in only one direction show an interesting behaviour when bent, especially if they remain completely in the elastic region and do not undergo plastic forming. This can be observed in their most common application: the measuring tape. They can be coiled easily because of the loss of stability of their cross-sections, which makes transportation of long shells efficient. This property could be very useful if one could use such a one-way curved shell as a beam, which could be transported and deployed easily. The aim of this study is to observe the behaviour of such a shell, under pure bending load, with special emphasis on the stability loss of the cross-section. In this paper, analytical, semi-analytical, and finite-element methods are used for the description of the shell. The solution derived here uses a variable cross-section Euler–Bernoulli beam model combined with elements of the Kirchhoff plate theory without the shallow shell assumption. It is assumed that the cross-section remains circular and does not change its length. For a universal description, dimensionless parameters and variables are introduced. The semi-analytical investigation revealed that the snap-through ability of the shell may not exist for certain cross-sections which can be presented on a stability map. The derived model reveals the existence of a limiting point between the cross-section deformation modes for larger cross-section angles. In the article, ready-to-use analytical and semi-analytical solutions are given for the critical load and stability map of these shells, which are compared to similar shallow shell models from the literature and the finite-element solution of the problem. The finite-element method also revealed that for a dimensionless description, a length-cross-section radius parameter should be introduced to describe the three-point bending scenario.

Thickness effects on the stability of thin walled structures

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

An Analysis of Current Stability Theories for Thin-Walled Members

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Form of Circumferential Weld-Induced Imperfections for Tapered-Wall Cylindrical Shell Structures

Analytical Research on Dynamic Buckling of Thin Cylindrical Shells with Thickness Variation under Axial Pressure

Buckling of the Axially Compressed Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure

Stability analysis of thin cylindrical shells under pure and three-point bending

Linear stability analysis of capillary instabilities for concentric cylindrical shells

Computational instability analysis of inflated hyperelastic thin shells using subdivision surfaces

Bifurcations of a Laminated Circular Cylindrical Shell

Asymptotic analysis of elastoplastic bifurcation of cylindrical shells with thickness variation under axial compression

A Thin Shell Theoretical Solution for Two Intersecting Cylindrical Shells Due to External Branch Pipe Moments

Computer modelling of thin-walled shell structures with geometric imperfections

Buckling instability of a thin-layer rectilinear Couette flow