Abstract:Biomass carbon-coated and pseudocapacitance-assisted α-Fe2O3 has recently gained more attention for enhanced lithium storage performance. Herein, we used a waste poplar branch as a biotemplate and a carbon source to prepare graphitic-C-doped mesoporous α-Fe2O3 (α-Fe2O3/C) through a simple immersion–carbonization–calcination method. The influence of carbon content on both the microstructures and electrochemical properties was also studied. The product calcined in air at 400 °C (Fe2O3/C400) presents a hierarchically tubular structure with cross-linkage of 18% graphitic-C and α-Fe2O3 nanoparticles with an average size of ∼28 nm. Meanwhile, the Fe2O3/C400 nanomaterial exhibits a large surface area of 114 m2 g–1 and mesopore size distribution centered at 2 nm. As lithium-ion battery anode material, such a unique hierarchical structure presents a certain pseudocapacitance behavior, thus improving its lithium storage performance. Electrochemical measurements show that the Fe2O3/C400 nanomaterial exhibits higher specific capacity and better rate performance. Especially, it can retain a capacity of 885 mA h g–1 at 1 A g–1 after cycling 1400 times, indicating good capacity retention and long-cycling stability. The good electrochemical performance mainly originates from the synergism of the unique microstructure of the Fe2O3/C400 nanomaterial, suitable doping of graphitic-C, and certain pseudocapacitance behavior. Thus, the low-cost bifunctional biotemplate strategy can provide a useful experience for the massive synthesis of pseudocapacitance-assisted high-performance anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00649?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00649</a>.Material characterization, assembly and electrochemical test of half-cells; XPS spectra of Fe2O3/C450 (Figure S1); N2 adsorption–desorption isotherm and pore size distribution of Fe2O3/C450 (Figure S2); long-cycling discharge performance of the Fe2O3/C400 electrode at 3.0 A g–1 (Figure S3); TG curve in air, XRD pattern, and cyclic performance of Fe2O3/C400-1 h electrode at 1.0 A g–1 (Figure S4); Li+-ion diffusion coefficient (Figure S5); TEM images of Fe2O3/C400 and Fe2O3/C450 electrodes before and after cycling 1000 times (Figure S6); and comparison of long cycle performance of carbon-doped Fe2O3 composites (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00649/suppl_file/an1c00649_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The optimization and comparison of the electrochemical performances for the polyaniline and melamine doping onto activated porous carbon material derived from pineapple leaf fiber as anode material for lithium-ion batteries

Biomass Inspired Nitrogen Doped Porous Carbon Anode with High Performance for Lithium Ion Batteries

Pineapple leaf fibers (PALF) as the sustainable carbon anode material for lithium-ion batteries

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Nitrogen Doped Porous Carbon with High Rate Performance for Lithium Ion Storage

Nitrogen-doped activated carbon derived from oil palm empty fruit bunch (OPEFB) for sustainable lithium-ion battery

N, P co‐Doped Hard Carbon Anodes for High‐Performance Lithium‐Ion Batteries with Enhanced Capacity Retention and Cycle Stability

Synthesis and electrochemical properties of nitrogen-doped porous carbon for lithium ion batteries

Energy efficient and fast charging nitrogen doped carbon anodes derived from BIAN‐melamine based porous organic polymer for lithium‐ion batteries

Structural Characteristics and Electrochemical Performance of N,P-Codoped Porous Carbon as a Lithium-Ion Battery Anode Electrode

Nitrogen-doped porous hard carbons derived from shaddock peel for high-capacity lithium-ion battery anodes

Nitrogen-doped Hierarchically Porous Carbonaceous Nanotubes for Lithium Ion Batteries

Nitrogen and Phosphorus Codoped Porous Carbon Framework As Anode Material for High Rate Lithium-Ion Batteries

A review of nitrogen-doped carbon materials for lithium-ion battery anodes

3D N-doped mesoporous carbon/SnO2 with polypyrrole coating layer as high-performance anode material for Li-ion batteries

Nitrogen-Doping-Induced High-Performance Carbon Nanofiber Anodes for Potassium-Ion Storage

Nitrogen-doped porous carbon/Co3O4 nanocomposites as anode materials for lithium-ion batteries

Nitrogen-Doped Porous Carbon Nanosheets Based on a Schiff Base Reaction for High-Performance Lithium-Ion Batteries Anode

Nitrogen doped porous carbon as excellent dual anodes for Li- and Na-ion batteries

Graphitic Carbon-Doped Mesoporous Fe 2 O 3 Nanoparticles for Long-Life Li-Ion Anodes

High content of nitrogen doped porous carbon prepared by one-step calcination for enviable rate lithium ion batteries