Abstract:Background: Although minimally invasive surgery (MIS) affords several advantages compared to conventional open surgery, robotic MIS systems still have many limitations. One of the limitations is the non-uniform gripping force due to mechanical strings of the existing systems. To overcome this limitation, a surgical instrument with a pneumatic gripping system consisting of a compressor, catheter balloon, micro motor, and other parts is developed. Method: This study aims to implement a surgical instrument with a pneumatic gripping system and pitching/yawing joints using micro motors and without mechanical strings based on the surgical-operation-by-wire (SOBW) concept. A 6-axis external arm for increasing degrees of freedom (DOFs) is integrated with the surgical instrument using LabVIEW® for laparoscopic procedures. The gripping force is measured over a wide range of pressures and compared with the simulated ideal step function. Furthermore, a kinematic analysis is conducted. To validate and evaluate the system's clinical applicability, a simple peg task experiment and workspace identification experiment are performed with five novice volunteers using the fundamentals of laparoscopic surgery (FLS) board kit. The master interface of the proposed system employs the hands-on-throttle-and-stick (HOTAS) controller used in aerospace engineering. To develop an improved HOTAS (iHOTAS) controller, 6-axis force/torque sensor was integrated in the special housing. Results: The mean gripping force (after 1,000 repetitions) at a pressure of 0.3 MPa was measured to be 5.8 N. The reaction time was found to be 0.4 s, which is almost real-time. All novice volunteers could complete the simple peg task within a mean time of 176 s, and none of them exceeded the 300 s cut-off time. The system's workspace was calculated to be 11,157.0 cm3. Conclusions: The proposed pneumatic gripping system provides a force consistent with that of other robotic MIS systems. It provides near real-time control. It is more durable than the existing other surgical robot systems. Its workspace is sufficient for clinical surgery. Therefore, the proposed system is expected to be widely used for laparoscopic robotic surgery. This research using iHOTAS will be applied to the tactile force feedback system for surgeon's safe operation.

A Steady-Hand Robotic System for Microsurgical Augmentation

A Robotic System with Force Feedback for Micro-Surgery

A Low-Cost Teleoperable Surgical Robot with a Macro-Micro Structure and a Continuum Tip for Open-Source Research

Laser-Actuated Multi-Fingered Hand for Dexterous Manipulation of Micro-Objects

Non-contact Dexterous Micromanipulation with Multiple Optoelectronic Robots

Soft Robotic Manipulation System Capable of Stiffness Variation and Dexterous Operation for Safe Human–Machine Interactions

Enabling intuitive and effective micromanipulation: A wearable exoskeleton-integrated macro-to-micro teleoperation system with a 3D electrothermal microgripper

Toward a Millimeter-Scale Tendon-Driven Continuum Wrist with Integrated Gripper for Microsurgical Applications

Microrobotic Manipulation at Time-Varying Air–Liquid Interface for High-Precise Watch-Hand Alignment

Precise and High-Load Capacity Miniature 6-DOF Manipulator for Microsurgery

Pneumatic-type surgical robot end-effector for laparoscopic surgical-operation-by-wire

A new hand-held force-amplifying device for micromanipulation

A Lightweight and Affordable Wearable Haptic Controller for Robot-Assisted Microsurgery

Teleoperation of an Anthropomorphic Robot Hand with a Metamorphic Palm and Tunable-Stiffness Soft Fingers.

Fiber-reinforced Soft Polymeric Manipulator with Smart Motion Scaling and Stiffness Tunability

Bimanual Manipulation of Steady Hand Eye Robots with Adaptive Sclera Force Control: Cooperative vs. Teleoperation Strategies

Hand-held robotic instrument for dextrous laparoscopic interventions

Hierarchical Learning and Control for In-Hand Micromanipulation Using Multiple Laser-Driven Micro-Tools

Unconstrained lightweight control interface for robot-assisted minimally invasive surgery using MediaPipe framework and head-mounted display

A 3D Printed Soft Robotic Hand With Embedded Soft Sensors for Direct Transition Between Hand Gestures and Improved Grasping Quality and Diversity

A Dexterous Soft Robotic Hand for Delicate In-Hand Manipulation