Abstract:Introduction. The permanent magnet synchronous motor (PMSM) has occupied a large area in the industry because of various benefits such as its simple structure, reduced moment of inertia, and quick dynamic response. Several control techniques have been introduced for the control of the PMSM. The direct torque control strategy associated to three-level clamped neutral point inverter has been proven its effectiveness to solve problems of ripples in both electromagnetic torque and stator flux with regard to its significant advantages in terms of fast torque response. Purpose. The use of a proportional integral speed controller in the direct torque control model results in a loss of decoupling with regard to parameter fluctuations (such as a change in stator resistance value induced by an increase in motor temperature), which is a significant drawback for this method at high running speeds. Methods. That is way a second order sliding mode controller based on the super twisting algorithm (STA) was implemented instead of PI controller to achieve a decoupled control with higher performance and to insure stability while dealing with parameter changes and external disturbances. Results. The simulation results carried out using MATLAB/Simulink software show that the model of direct torque control based on a three-level inverter-fed permanent magnet synchronous motor drive has better performance with second order sliding mode speed controller than the proportional integral controller. Through the response characteristics we see greater performance in terms of response time and reference tracking without overshoots. Decoupling, stability, and convergence toward equilibrium are all guaranteed.

Novel Field Oriented Direct Control Using SVPWM for Analysis of Induction Motor

Direct Torque Control of the Induction Motor Fed with a Three-Level Inverter

Implementation of Indirect Field Oriented Control Using Space Vector Pulse Width Modulation for the Control of Induction Motor

Virtual Vector based SVPWM-DTC for Five-Phase Two-Level VSI fed Induction Motor Drive

Development and Analysis of Pulse Width Modulation Techniques for Induction Motor Control

SVPWM control strategy for a three phase five level dual inverter fed open-end winding induction motor

A V/Hz Based Maximum Torque Per Volt Control in Flux-Weakening Region for Interior Permanent Magnet Synchronous Motors

Non-sinusoidal Output Voltage for Multiphase Variable Speed Drives with Space Vector PWM

Study on Induction Motor Converter Based on SVPWM

Indirect Field Oriented Control for High Performance Induction Motor Drives Using Space Vector Modulation with Consideration of Core Loss

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

Speed Sensorless Vector Control of Induction Motors Fed by Three-Level NPC Inverter Based on a General SVPWM Algorithm

A Novel SVPWM Control Strategy for Dual Inverter System to Eliminate Common Mode Voltage with High Modulation

A Novel SVPWM Scheme for Field-Oriented Vector-Controlled PMSM Drive System Fed by Cascaded H-Bridge Inverter

A Simplified DTC-SVPWM Scheme for Induction Motor Drives Using a Single PI Controller

Unified Complex Vector Field-Weakening Control for Induction Motor High-Speed Drives

Voltage-Oriented Vector Control of Induction Motor: Principle and Performance Improvement

Vector Control System for Induction Motors Based on Five-Level Active Neutral-Point-Clamped Dual-PWM Converter

Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study

Experimental Realization of a Novel 48-Sector Space Vector Decomposition-Based SVPWM Technique for A Six-Phase Two-Level VSI-Fed Six-Phase Asymmetrical Induction Motor

Research on Novel Open-End Winding Permanent Magnet Synchronous Motor Vector Control Systems