Abstract:The building has a large impact on the space heating demand and the indoor environment is affected by climate or daylight. Hence, silica aerogel has generally used as a film to reduce the coefficient of the window in the building. Silica aerogel is a suitable material to apply for insulation material with lower thermal conductivity than that of air to save interior energy. However expensive precursor and drying process were the main issue of the silica aerogel synthesis and practical usage. We attempt to fabricate aerogel insulation film for energy saving through the economic process under ambient pressure. Silica aerogel was synthesized from rice husk ash, which was an agricultural waste to be able to recycle. Taguchi design was used to optimize the parameters (amount of rice husk ash, pH, aging time) controlling the surface area of silica aerogel. The silica aerogel is prepared by sol-gel processing through acidic treatment and aging. The silica aerogel was obtained by modification of silica hydrogel surface and dry at ambient pressure. Finally, aerogel film was respectively fabricated by the different content of aerogel in polydimethylsiloxane (PDMS). Silica aerogel obtained 21 – 24nm average particle size was analyzed by SEM and silica aerogel with high surface area (832.26 m2/g), pore size ( 3.30nm ) was characterized by BET. Then silica Aerogel – PDMS insulation film with thermal conductivity (0.002 W/mK) was analyzed by thermal wave system. The study demonstrates an eco-friendly and low-cost route toward silica – PDMS insulation film with low thermal conductivity (0.002 W/mK).

Development of a New Silica Aerogel-Polypropylene Foam Composite as a Highly Flexible Thermal Insulation Material

Development of a New Silica Aerogel-Polypropylene Foam Composite as a Highly Flexible Thermal Insulation Material

Highly Flexible and Compressible Polyimide/silica Aerogels with Integrated Double Network for Thermal Insulation and Fire-Retardancy

Fabrication and characterization of Aerogel-Polydimethyl siloxane (PDMS) Insulation Film

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

Flexible, high-temperature-resistant silica-polymer aerogel hybrids by templating polymethylsilsesquioxane microstructure with trace polyimide

High Compression Strength and Thermal Insulation Silica Aerogel Monolith with Scaffold of a Cyclic Olefin Siloxane Co-Oligomer Via Ambient Pressure Drying

A Robust Silicone Aerogel Via Copolymerization of a Difunctional Organoalkoxysilane and Polymethylmethoxysiloxane for High-Temperature Thermal Insulation

Fabrication of flexible silica aerogel composite blankets from an aqueous fumed silica-based slurry

SiOC foam‐aerogel composites: Optimal balance of lightness and excellent thermal insulation

Transparent, robust, and machinable hybrid silica aerogel with a “rigid-flexible” combined structure for thermal insulation, oil/water separation, and self-cleaning

Robust-flexible and highly-thermostable polyimide-silica aerogels with adjustable fiber skeleton structure for efficient aerospace thermal protection

A flexible silica aerogel paper with temperature-switch opacifier for thermal insulation

Ultra-Light and Ultra-Low Thermal Conductivity of Elastic Silica Nanofibrous Aerogel with TiO2 Opacifier Particles as Filler

A Novel Silica Aerogel/porous Si3N4 Composite Prepared by Freeze Casting and Sol-Gel Impregnation with High-Performance Thermal Insulation and Wave-Transparent

An All-Ceramic, Anisotropic, and Flexible Aerogel Insulation Material

A Scalable Crosslinked Fiberglass-Aerogel Thermal Insulation Composite

Lightweight, Strong, and Super-Thermal Insulating Polyimide Composite Aerogels under High Temperature

Fabrication and characterization of silica aerogel blanket as an excellent thermal insulating material

Microstructure And Thermal Insulation Property Of Silica Composite Aerogel

Ultralight and Flexible Monolithic Polymer Aerogel with Extraordinary Thermal Insulation by A Facile Ambient Process