Abstract:Process intensification by cavitation is gaining widespread attention due to the benefits that the intense bubble collapse conditions can provide, yet, several knowledge gaps exist in the modelling of such systems. This work studies the numerical prediction of single bubble dynamics and the various approaches that can be employed to estimate the changes in the chemical composition of cavitating bubbles. Specific emphasis is placed on the prediction of the radical production rates during bubble collapse and the computational performance, with the aim of coupling the single bubble dynamics to flow models for reactor hydrodynamics. The results reveal that the choice of chemical reaction approach has virtually no effect on the bubble dynamics, whereas the predicted radical production rates can differ substantially. It is found that evaluating the radical production only on temperature peaks, an approach commonly followed in literature, may result in the most erroneous estimations (on average 12.8 times larger than those of the full kinetic model), while a simplified kinetic model yields more accurate predictions (2.3 times larger) at the expense of increased computational times. Continuous evaluation of the bubble content by assuming equilibrium when the bubble temperature is above a certain threshold (≈1500K) is shown to be capable of predicting total radical production values close to those estimated by solving the kinetics of a detailed reaction model (19.8% difference), as well as requiring only 22.2% more computational costs compared to simulations without chemical reaction modelling. Such an equilibrium approach is therefore recommended for future studies aiming to couple flow simulations with single bubble dynamics to accurately predict radical production rates in cavitation devices, involving numerous bubbles following different flow trajectories. Furthermore, an algebraic expression that successfully approximates the full kinetic simulation results is proposed as a function of the initial nucleus size and the time integral of the liquid pressure when it is under vapor pressure. Such a model can be applied in modelling efforts that do not require local instantaneous radical concentrations, and paves the way for efficient closure modelling of radical production in CFD simulations of hydrodynamic reactors.

Cavitation reactors: Efficiency assessment using a model reaction

Modelling of chemical kinetics in the presence of hydrodynamic cavitation for wastewater treatment applications

On efficient modelling of radical production in cavitation assisted reactors

Cavitation technologies for extraction of high value ingredients from renewable biomass

Study on the characteristics of cavitation and COD removal of an addendum rotational hydrodynamic cavitation reactors

Cavitation characteristics analysis of a novel rotor-radial groove hydrodynamic cavitation reactor

ANN based surrogate model for key Physico-chemical effects of cavitation

Eulerian–Lagrangian modeling of phase transition for application to cavitation-driven chemical processes

Numerical investigation of three-dimensional effects of cavitating flow in a venturi-type hydrodynamic cavitation reactor

Experimental and numerical study of cavitation inside sharp-edged multi-hole orifice plate 1

Hydrodynamic cavitation phenomena and flow instabilities in wastewater treatment: A multiphase VOF study with a venturi cavitator

Experimental study of the cavitation noise and vibration induced by the choked flow in a Venturi reactor

Parametrical investigation of acoustic cavitation and extraction enhancement in ultrasonic microreactors

Mapping of cavitation intensity in a novel dual-frequency ultrasonic reactor of capacity 10 L

Hydrodynamic Cavitation for Micropollutant Degradation in Water - Correlation of Bisphenol a Degradation with Fluid Mechanical Properties

Understanding cavitation bubble collapse and rebound near a solid wall

Physical and chemical characterization of shock-induced cavitation

Significance of hydrodynamic cavitation to enhance reuse of secondary sedimentation tank effluent: a geometrical assessment

Application of hydrodynamic cavitation in the field of water treatment

Investigations on cavitation flow and vorticity transport in a jet pump cavitation reactor with variable area ratios

A new cavitation model based on evaporation and condensation theory