Abstract:The focused solar water heating system can automatically adjust its focus according to the solar angle for higher heating rate and source temperature. One of the major challenges for such solar heat collector is stabilizing its daily heat outputs. This study intends to utilize a bulk low melting point alloy (140 degrees C)/expanded graphite (mass ratio of 9:1) composite phase change energy storage material to assure the stability and availability of the hot water output. To investigate the thermal properties of the proposed new material with different apparent densities, this study conducted scanning electron microscopy (SEM), X-ray powder diffractometry (XRD) and differential scanning calorimetry (DSC) tests to examine its thermal conductivity, storage density, and stability. The results of SEM show that the porous structure of expanded graphite (EG) can effectively adsorb the alloy and prevent material leakage. The XRD test shows that the formation of the low melting point alloy and the expanded graphite is a physical process without new substance creation. The DSC test shows the phase change temperature of the composite phase change material (PCM) is about 140 degrees C with an enthalpy of 45.05 kJ kg(-1) (0.46% different from its theoretical value). The thermal conductivity of the bulk alloy/expanded graphite composite PCM with density of 2083 kg m(-3), 2500 kg m(-3), 3125 kg m(-3), 4167 kg m(-3) and 5000 kg m(-3) are 12.65 W m(-1) K-1, 14.64 W m(-1) K-1, 20.80 W m(-1)K(-1), 28.16 W m(-1)K(-1) and 32.64 W m(-1) K-1, respectively, which has an improved thermal conductivity compared to pure alloys (12.44 W m(-1) K-1), especially the bulk composite PCM with a density of 5000 kg m(-3) has the best thermal conductivity and the volumetric energy storage density reaches 2.25 x 10(5) kJ m(-3), higher than the phase change heat storage density of most PCMs for thermal management, such as paraffin (volume heat density is 1.8 x 105 kJ m(-3)), and repeated heating in an environment of high temperature of 180 degrees C does not leak. The results suggested that the developed composite phase change energy storage material with an apparent density of 5000 kg m(-3) has high heat storage capacity, thermal conductivity, energy density and is able to effectively improve the heat exchange rate of the focused solar water heating system.

Experimental investigation into the influences of water loss on the exothermic process of alum-based phase change materials

Parametric Study on Melting Process of a Shell-and-tube Latent Thermal Energy Storage under Fluctuating Thermal Conditions

Experimental study on a new thermal storage tank with an embedded bionic skeleton based on inorganic hydrated salt phase change material

Al 2 O 3 nanoparticles integration for comprehensive enhancement of eutectic salt thermal performance: Experimental design, molecular dynamics calculations, and system simulation studies

Experimental investigation and phase separation elimination of Na2SO4·10H2O and KAl(SO4)2·12H2O mixtures for thermal energy storage

The Experimental Exploration of Sodium Chloride Solution on Thermal Behavior of Phase Change Materials

Development of a sodium acetate trihydrate-based phase change material for efficient solar/electric-to-thermal energy conversion

Preparation and Thermal Properties of Low Melting Point Alloy/expanded Graphite Composite Phase Change Materials Used in Solar Water Storage System

Insights into the thermophysical properties and heat conduction enhancement of NaCl-Al2O3 composite phase change material by molecular dynamics simulation

Experimental Research of the Heat Storage Performance of a Magnesium Nitrate Hexahydrate-Based Phase Change Material for Building Heating

Experimental Investigation of a Novel Solar Energy Storage Heating Radiator with Phase Change Material

Development of Macro-Encapsulated Phase-Change Material Using Composite of NaCl-Al2O3 with Characteristics of Self-Standing

Experimental study on the electrically-triggered crystallization behavior of supercooled copper foam-based and expanded graphite-based sodium acetate trihydrate

Novel Na2SO4-NaCl-ceramic composites as high temperature phase change materials for solar thermal power plants (Part I)

AlN micro-honeycomb reinforced stearic acid-based phase-change composites with high thermal conductivity for solar-thermal-electric conversion

Experimental Analysis of Salt Hydrate Latent Heat Thermal Energy Storage System With Porous Aluminum Fabric and Salt Hydrate as Phase Change Material With Enhanced Stability and Supercooling

Preparation and thermal properties of novel inorganic-organic eutectic composite material with high latent heat and thermal conductivity based on aluminum sulfate salt

Performance optimization of sodium acetate trihydrate-based phase change material

Preparation of Phase‐change Composite Aerogel Materials and Its Application in Solar Saline‐alkali Water Desalination

Improvement of the Subcooling Problem of Sodium Acetate Trihydrate by a Combination of Stirring or Internal Electric Field and Nucleating Agent

Phase Change Material Enhanced Sustained and Energy-Efficient Solar-Thermal Water Desalination