An Innovative Percolation Theory‐based Method for Characterizing Shale Pore Connectivity

Lingjie YU,Yuchen FAN,Keyu LIU

DOI: https://doi.org/10.1111/1755-6724.14759

2021-10-01

Abstract:Acta Geologica Sinica - English Edition, Accepted Article.

geosciences, multidisciplinary

What problem does this paper attempt to address?

A method for analyzing nanopore connectivity of shale using a fluid suction experiment

Wentao ZHANG,Wenxuan HU,Fang BAO,Lingjie YU,Ming FAN,Qingzhen ZHANG

DOI: https://doi.org/10.11781/sysydz202003415

2020-01-01

Abstract:A method for analyzing the pore connectivity of shale based on a suction experiment of tracer fluid is presented. Sodium chloraurate solution is absorbed into shale pores which have been previously evacuated, and then the solute in the pores is converted to gold by heating. After the suction experiment, the sample surface is polished and analyzed with scanning electron microscopy, in order to get the characteristics of connected pores at the nano-scale. The results of two core samples from the Wufeng-Longmaxi formations in the Sichuan Basin show the connected network in shale could be divided into three parts. The interior connectivity of pores in organic matter is related to the density of pores, and organic matter normally has low flow efficiency because of narrow throat radius. Fractures distributed at grain boundaries such as minerals, organic matter and clay sheets are advantageous pathways, and organic pores are connected by grain boundaries. The development of micro-cracks/fractures, which have high permeability, could significantly improve shale connectivity. Shale pore connectivity has great anisotropy, which means connectivity parallel to bedding is much better than that vertical to bedding.
Characterization of Flow Parameters in Shale Nano-Porous Media Using Pore Network Model: A Field Example from Shale Oil Reservoir in Songliao Basin, China

Qingzhen Wang,Zhihao Jia,Linsong Cheng,Binhui Li,Pin Jia,Yubo Lan,Dapeng Dong,Fangchun Qu

DOI: https://doi.org/10.3390/en16145424

IF: 3.2

2023-07-17

Energies

Abstract:The pore-throat radius of the shale oil reservoir is extremely small, and it is difficult to accurately obtain the absolute permeability and oil–water two-phase relative permeability of the actual oil reservoir through conventional core experiments. However, these parameters are very important for reservoir numerical simulation. In this paper, a method for characterizing flow parameters based on a pore network model that considers differential pressure flow and diffusion flow is proposed. Firstly, a digital core was reconstructed using focused ion beam scanning electron microscopy (FIB-SEM) from the Gulong shale reservoir in the Songliao Basin, China, and a pore network model was extracted. Secondly, quasi-static single-phase flow and two-phase flow equations considering diffusion were established in the pore network model. Finally, pore-throat parameters, absolute permeability, and oil–water two-phase permeability curves were calculated, respectively. The results show that the pore-throat distribution of the Gulong shale reservoir is mainly concentrated in the nanometer scale; the mean pore radius is 87 nm, the mean throat radius is 41 nm, and the mean coordination number is 3.97. The calculated permeability considering diffusion is 0.000124 mD, which is approximately twice the permeability calculated without considering diffusion. The irreducible water saturation of the Gulong shale reservoir is approximately 0.4, and the residual oil saturation is approximately 0.35. The method proposed in this paper can provide an important approach for characterizing the flow parameters of similar shale oil reservoirs.

energy & fuels
Pore connectivity and water accessibility in Upper Permian transitional shales, southern China

Mengdi Sun,Linhao Zhang,Qinhong Hu,Zhejun Pan,Bingsong Yu,Liangwei Sun,Liangfei Bai,Luke D. Connell,Yifan Zhang,Gang Cheng

DOI: https://doi.org/10.1016/j.marpetgeo.2019.05.035

IF: 5.361

2019-09-01

Marine and Petroleum Geology

Abstract:Pore connectivity of shale controls shale gas migration and production behavior. The pore connectivity and water accessibility in clay-rich Upper Permian transitional shales remain unclear. Contrast matching small-angle neutron scattering (CM-SANS) tests were used to determine the accessibility of water to pores in the transitional shales. Complementary analyses with SANS, gas (CO2 and N2) physisorption isotherm, mercury intrusion capillary pressure (MICP), helium ion microscopy (HIM), as well as field emission-scanning electron microscopy (FE-SEM) were conducted to study the pore connectivity and distribution characteristics of closed pores. The results show that closed pores (inaccessible to nitrogen molecules and mercury) are mainly distributed in pore diameters <10 nm and associated with organic pores and interlayer spaces of illite-smectite mixed-layer mineral. The pore volume values obtained from MICP and N2 adsorption underestimate the large pores (pore diameters >100 nm) in shales. Based on deuterated water CM-SANS tests, 87–98% of the pores (2–200 nm diameters) are water-connected in transitional samples. The low accessibility to water is at pore-sizes of 5–10 nm and 20–30 nm. Results from in-situ gas contents show that closed pores have a certain gas bearing capacity, but micropores (pore diameters <2 nm) control the gas occurrence in transitional samples. The connectivity of the organic pore network and between organic pores and surrounding interparticle pores is directly supported by FE-SEM and HIM imaging. Overall, improving pore-fracture connectivity through effective fracturing techniques is a means of mitigating the rapid decline in shale gas production.

geosciences, multidisciplinary
Shale pore connectivity and influencing factors based on spontaneous imbibition combined with a nuclear magnetic resonance experiment

Xuejun Wang,Min Wang,Ying Li,Jinxu Zhang,Ming Li,Zheng Li,Zhiqiang Guo,Jinbu Li

DOI: https://doi.org/10.1016/j.marpetgeo.2021.105239

IF: 5.361

2021-10-01

Marine and Petroleum Geology

Abstract:Shale pore connectivity is of great significance for the enrichment and development of shale oil; however, quantitative evaluations are difficult owing to the tightness, heterogeneity, and complex wettability of shale. This paper presents a spontaneous imbibition technique combined with nuclear magnetic resonance (SI-NMR) that was established to probe the shale pore connectivity—especially the connectivity of pores with different sizes and wettabilities—of a set of shales with low–medium maturity from the Shahejie Formation of the Jiyang depression. The research results indicate that the micropore connectivity was the greatest, followed by that of mesopores and macropores (or bedding fracture or microfractures); additionally, the connectivity of water-wet pores is better than that of oil-wet pores. The oil imbibition slope reflecting pore connectivity has a negative correlation with the PI (production index), a positive correlation with Tmax (reflecting organic matter maturity) and calcite content, and no significant correlation with the contents of TOC (total organic carbon) or other minerals. This research also revealed that the length and imbibition area of shale have little effect on the imbibition slope, while anisotropy in the imbibition direction and preferential imbibition in small pores substantially affect the slope. This study provides a method for evaluating the connectivity of different pore scales in shale, which is expected to help understand the flow mechanism and production characteristics of shale oil. The results are thus of great significance to improve shale oil evaluation and to find favorable development areas for shale oil.

geosciences, multidisciplinary
The impact of pore heterogeneity on pore connectivity and the controlling factors utilizing spontaneous imbibition combined with multifractal dimensions: Insight from the Longmaxi Formation in Northern Guizhou

Wenjibin Sun,Yujun Zuo,Zhijie Wen,Bobo Li,Zhonghu Wu,Lulin Zheng,Jianyun Lin,Hao Liu,Bin Chen,Peng Rong,Qinggang Chen,Renjun Tian,Qichi Dai

DOI: https://doi.org/10.1016/j.energy.2024.133329

IF: 9

2024-10-12

Energy

Abstract:The heterogeneity of shale pores, a crucial factor in the occurrence and migration of shale gas, exerts a significant impact on the pore connectivity. Pores exhibiting a range of structural attributes to the complexity of pore connectivity. A comprehensive study into the impact of pore heterogeneity on pore connectivity in shale is lacking. This study aims to explore the impact of pore heterogeneity on pore connectivity in shale and the primary controlling factors of pore connectivity. Shale pore connectivity, pore structures, mineral composition, and geochemical parameters were assessed using various tests, including spontaneous imbibition, adsorption, mercury intrusion capillary pressure (MICP), focus ion beam-scanning electron microscopy (FIB-SEM), sulfur and carbon analysis, vitrinite reflectivity, and X-ray diffraction (XRD). Pore heterogeneity was quantitatively analyzed using the multifractal dimensions method. Results show that the increased heterogeneity of pore structure and surface roughness facilitating the potential for increased connectivity. The presence of well-developed micro-mesopores within the organic matter, alongside numerous disconnected and independent pores, contributes to an increase in pore heterogeneity. Micro-mesopore structures have a more pronounced impact on pore heterogeneity than macropores. The heterogeneity of the pores is predominantly influenced by variations in the PV and SSA of micro-mesopores. Furthermore, the heightened heterogeneity of pore structure (D 1 ) and surface roughness (D 2 ) leads to a more complex pore structure with increased roughness, promoting the potential for enhanced connectivity through additional throats and facilitating the formation of secondary microfractures. Shale cores characterized by high total organic carbon (TOC) content, porosity, and clay mineral content are conducive to improved pore connectivity. Conversely, the increase of thermal evolution maturity of shale in the over-mature stage is not conducive to the increase of pore connectivity. Thermal evolution maturity, TOC content, and clay mineral are key factors that control pore heterogeneity, further affecting the connectivity of shale pores. High pore connectivity is conducive to spontaneous imbibition capacity and the formation of hydraulic microfractures, promoting the migration of shale gas.

energy & fuels,thermodynamics
An Apparent Permeability Model in Organic Shales: Coupling Multiple Flow Mechanisms and Factors

Haosheng Song,Bobo Li,Jianhua Li,Pingping Ye,Shulei Duan,Yunna Ding

DOI: https://doi.org/10.1021/acs.langmuir.2c03277

IF: 3.9

2023-03-21

Langmuir

Abstract:It is of great significance to study shale apparent permeability under the action of multiple flow mechanisms and factors because shale reservoirs possess complex pore structures and flow mechanisms. In this study, the confinement effect was considered, with the thermodynamic properties of gas being modified, and the law relating to the conservation of energy adopted to characterize bulk gas transport velocity. On this basis, the dynamic change of pore size was assessed, from which shale apparent permeability model was derived. The new model was verified by three steps: experimental and molecular simulation results of rarefied gas transport, shale laboratory data, and comparison with different models. The results revealed that, under the conditions of low pressure and small pore size, the microscale effects became obvious, which significantly improved gas permeability. Through comparisons, the effects of surface diffusion and matrix shrinkage, including the real gas effect, were obvious in the smaller pore sizes; nevertheless, the stress sensitivity effect was stronger in larger pore sizes. In addition, shale apparent permeability and pore size decreased with an increase in permeability material constant and increased with increasing porosity material constant, including internal swelling coefficient. The permeability material constant had the greatest effect on gas transport behavior in nanopores, followed by the porosity material constant; however, the internal swelling coefficient had the least effect. The results of this paper will be important for the prediction and numerical simulation of apparent permeability relating to shale reservoirs.
Research on an effective permeability prediction method for shale reservoirs based on imbibition experiments

Fanhui Zeng,Jing Jiang,Dagan Hu,Fuchun Tian,Jianchun Guo,Qiang Zhang,Zhangxin Chen

DOI: https://doi.org/10.1007/s12517-024-11926-3

2024-03-12

Arabian Journal of Geosciences

Abstract:Permeability is a critical parameter for effective shale gas extraction. Shale reservoirs are dense, and fluid can hardly flow through shale rock under pressure, greatly limiting the permeability, which is commonly obtained by the steady-state core analysis method. At the same time, shale reservoirs contain abundant clay minerals and micro- and nanopores, resulting in favorable spontaneous imbibition ability. At present, most studies for predicting the absolute rock permeability are based on the imbibition process, while the combined influences of the dynamic capillary pressure, slip effect, and osmotic pressure have been considered in few effective permeability prediction studies. First, an imbibition experiment of an undersaturated shale core was conducted to obtain the spontaneous imbibition coefficient of shale. Furthermore, considering the influences of the slip effect, osmotic pressure, tortuosity, and dynamic capillary pressure, an effective permeability prediction method was established based on the imbibition coefficient of shale reservoirs. Combined with previous experimental data, the permeability calculated by this model is close to the experimental data, and the maximum error is less than 11.6%, verifying the effectiveness of the model. The permeability of the lower Silurian Longmaxi Formation shale in the Changning area, Sichuan, can be obtained by using this method. The results showed the following: (1) the calculated result error with the model results of the literature is 1.43 to 3.57%, which shows good contrast. The established effective permeability prediction method considers more comprehensive factors, requires fewer parameters, involves a clear calculation process, accurately meets the production demand, and agrees better with the real formation conditions. (2) The effects of the osmotic pressure, tortuosity, and slip length on the effective permeability successively decrease. Ignoring the osmotic pressure and slip length could lead to a higher effective permeability, while ignoring the tortuosity could lead to a low effective permeability. (3) The effective permeability of reservoirs can be obtained by using this method with different working fluids, and reservoir damage can be rapidly evaluated, which has guiding significance for selecting reasonable working fluids. The method provides a new way to evaluate the effective permeability of shale reservoirs effectively and quickly.

geosciences, multidisciplinary
Pore-Scale Geometry Effects on Gas Permeability in Shale

Ziyan Wang,Xu Jin,Xiaoqi Wang,Liang Sun,Moran Wang

DOI: https://doi.org/10.1016/j.jngse.2016.07.057

IF: 5.285

2016-01-01

Journal of Natural Gas Science and Engineering

Abstract:One main challenge for prediction of gas permeability in shale is the geometrical complexity at pore scale of shale. Shale structure is highly anisotropic and heterogeneous, which cannot be well described by packing of spheres or bundle of tubes. Besides, there are abundant nanoscale pores in shale so that the Knudsen number of gas flow is high, leading to failure of the conventional Darcy's law. Aiming at these challenges, we have studied the influences from pore-scale anisotropy and heterogeneity of shale microstructures on gas permeability including the high Knudsen number effect (or Klinkenberg effect for Darcy scale). First, a geometry-based method is proposed to quantify the pore-scale anisotropy and heterogeneity of shale. Then we reconstruct three-dimensional shale structures by the random generation-growth algorithm and use the lattice Boltzmann method to predict its permeability. To reveal the high Knudsen number effect, both intrinsic permeability and apparent permeability are evaluated. Our results suggest that the intrinsic permeability increases with the anisotropy of pore geometry in parallel direction to the bed, while decreases in perpendicular direction. The slip factor for Klinkenberg correction also exhibits anisotropy when high Knudsen effect is considered. On the other hand, the heterogeneity of pore distribution may have positive influences on intrinsic permeability for given porosities.
Analytical Model of Shale Gas Permeability Based on the Pore Size Distribution from FE-SEM and Image Analysis

Ke Jiang,Wen Zhou,Na Jia,Ruiyin Liu,Haoyu Wang,Qiumei Zhou,Chao Tang

DOI: https://doi.org/10.1007/s13369-023-08670-3

IF: 2.807

2024-01-23

Arabian Journal for Science and Engineering

Abstract:Shale matrix permeability is vital to the evaluation of shale petrophysical property. In this study, an analytical model that considers pore size distribution, tortuosity, adsorption, and slippage effects is developed, to calculate the permeability of shale samples. Specifically, field emission scanning electron microscope (FE-SEM), the ImageJ software, and the MATLAB programming and numeric computing environment are employed to experimentally characterize the pore structure and to fit and optimize the pore size distribution. The discrete pore size distributions of organic matter and inorganic matter pores for Longmaxi and Qiongzhusi shale samples are determined based on FE-SEM images. According to the sum of squares error (SSE), coefficient of determination ( R 2 ), root-mean-square error (RMSE), and outcome of the fit, the Gaussian 2 correlation function is optimized to fit the continuous pore size distribution. Finally, the permeabilities of five shale rock samples are calculated and compared with the measured results from the Longmaxi and Qiongzhusi Formations. The results illustrate that the multi-term Gaussian fit is more suitable for calculating the permeability of samples with multimodal pore size distributions than the multi-segment Gaussian fit. The calculated results from the pore size distribution are more accuracy than those from the representative mean pore radius. The influence of pore size distribution on permeability and how seepage mechanisms in different pore sizes work together to represent permeability changes at the core scale will be investigated in the future. The study provides a more reliable calculation of the shale matrix permeability compared to previous methods.

multidisciplinary sciences
An anisotropic pore-network model to estimate the shale gas permeability

Di Zhang,Xinghao Zhang,Haohao Guo,Dantong Lin,Jay N. Meegoda,Liming Hu

DOI: https://doi.org/10.1038/s41598-021-86829-4

IF: 4.6

2021-04-12

Scientific Reports

Abstract:Abstract The permeability of shale is a significant and important design parameter for shale gas extraction. The shale gas permeability is usually obtained based on Darcy flow using standard laboratory permeability tests done on core samples, that do not account for different transport mechanisms at high pressures and anisotropic effects in shales due to nano-scale pore structure. In this study, the permeability of shale is predicted using a pore network model. The characteristics of pore structure can be described by specific parameters, including porosity, pore body and pore throat sizes and distributions and coordination numbers. The anisotropy was incorporated into the model using a coordination number ratio, and an algorithm that was developed for connections of pores in the shale formation. By predicting hydraulic connectivity and comparing it with several high-pressure permeability tests, the proposed three-dimensional pore network model was verified. Results show that the prediction from the anisotropic pore network model is closer to the test results than that based on the isotropic pore network model. The predicted permeability values from numerical simulation using anisotropic pore network model for four shales from Qaidam Basin, China are quite similar to those measured from laboratory tests. This study confirmed that the developed anisotropic three-dimensional pore network model could reasonably represent the natural gas flow in the actual shale formation so that it can be used as a prediction tool.

multidisciplinary sciences
Research on the Shale Porosity–TOC Maturity Relationship Based on an Improved Pore Space Characterization Method

Jianbin Zhao,Shizhen Ke,Weibiao Xie,Zhehao Zhang,Bo Wei,Jinbin Wan,Daojie Cheng,Zhenlin Li,Chaoqiang Fang

DOI: https://doi.org/10.3390/en17050997

IF: 3.2

2024-02-21

Energies

Abstract:Shale pore structure characterization is key to shale reservoir evaluation, sweet spot selection, and economic exploitation. It remains a challenge to accurately characterize shale micro-nano pores. Common experimental characterization methods for shale pore systems are listed, and advantages and weaknesses of each method are analyzed. An improved pore structure characterization method for shale is proposed by combining Helium and NMR. The new method does not affect shale samples and has a higher accuracy. The affecting factors for shale pore evolution for shale are also discussed, showing that organic matter content and maturity are key factors in total porosity development. Furthermore, a shale porosity–TOC maturity relationship chart is developed based on the experimental data of shale samples selected from six shale reservoirs. The application of this chart in Well X in the Gulong field of Songliao Basin proves its utility in evaluating shale reservoirs.

energy & fuels
Investigations of Water Transport in Shale Reservoir with Dual-Wettability by Using Monte Carlo Method

Tuo Liang,Weipeng Fan,Bo Yu,Changhua Yang,Ming Qu

DOI: https://doi.org/10.1021/acsomega.3c07609

IF: 4.1

2023-12-05

ACS Omega

Abstract:How liquids transport in the shale system has been the focus because of fracturing fluid loss. In this study, a single-nanopore model is established for liquid transport in shale while considering the slip effect and effective viscosity of confined fluids. Then, the fractal Monte Carlo (FMC) model is proposed to upscale the single-pore model into shale porous media. The effects of different transport mechanisms, shale wettability, and pore characteristic parameters on confined liquid flow in shale rock are investigated. Results show that FMC permeabilities are 2-3 orders of magnitude larger than intrinsic and slip-corrected permeabilities in organic matter. However, the slip effect and effective viscosity have little influence on water flow in inorganic matter. With the contact angle of organic pore (θom) increasing and contact angle of inorganic pore (θin) decreasing, the effective permeability of the whole shale matrix grows in number. The enhancement factor in the situation of θom = 170° and θin = 20° is 4 orders of magnitude larger than the case of θom = 130° and θin = 40°, although the close effective macroscopic contact angle (θeff = 80°) occurs in these two cases, which indicates that shale microscopic wettability has a significant impact on the confined liquid transport. Moreover, with the increase of porosity and maximum pore diameters, shale permeability increases rapidly, but the enhancement factor has the opposite trend. Compared with the tiny impact of the variance of minimum inorganic pore diameters, minimum organic pore diameters have more significant impacts on liquid flow in shale systems, and the enhancement factor also rapidly increases up to 30 times for the case of 0.5 nm because of the strong slip effect.
A field study of pore-network systems on the tight shale gas formation through adsorption-desorption technique and mercury intrusion capillary porosimeter: Percolation theory and simulations

Elieneza Nicodemus Abelly,Feng Yang,Mbega Ramadhani Ngata,Grant Charles Mwakipunda,Eric Richard Shanghvi

DOI: https://doi.org/10.1016/j.energy.2024.131771

IF: 9

2024-05-29

Energy

Abstract:Properly identifying microscopic pore structure properties of shale reservoirs is essential for developing efficient extraction techniques of shale hydrocarbons. To understand the unique and complex pore network of the Northern Guizhou shale reservoir, shale samples from the Wufeng-longmaxi Formation were investigated using different analytical techniques, X-Ray Diffractometry, low-pressure nitrogen gas adsorption-desorption isotherms, and Mercury intrusion capillary porosimeter. Results indicate that the Wufeng-longmaxi formation is mainly composed of a high quantity of quartz ranging from 0.6 % to 64.1 % and an average extent of 55.825 %, the lowest amount of potassium feldspar ranging from 0.6 % to 2.2 % and an average extent of 1.45 % with Total organic contents ranging from 3.672 to 5.209 %. Similarly, the BJH adsorption techniques for pore volume and area were investigated. The results indicate the dominance of the mesopore with pore size ranging from 2.03 nm to 40nm, average pore volume of 0.073715 m 3 /g, and average pore area of 13.0324 m 2 /g. The pore throat distributions from MICP showed drain pressure and median pore throat radius ranging from 0.47 to 13.79 MPa and 0.05–0.08 μm, respectively. Suggested complementary experimental techniques reveal the connectivity of pore networks of the Wufeng-longmaxi Formation shale reservoir, which shows a high production potential of hydrocarbons. The findings of this study can provide a valuable understanding of fluid transport properties and storage space of shale gas that can help decision-makers as they set exploration initiatives for shale gas reservoirs.

energy & fuels,thermodynamics
A new and integrated imaging and compositional method to investigate the contributions of organic matter and inorganic minerals to the pore spaces of lacustrine shale in China

Zhiye Gao,Zhu Liang,Qinhong Hu,Zhenxue Jiang,Qixiang Xuan

DOI: https://doi.org/10.1016/j.marpetgeo.2021.104962

IF: 5.361

2021-05-01

Marine and Petroleum Geology

Abstract:Pore structure is an important factor controlling the shale gas content. Field-emission scanning electron microscopy (FE-SEM) is a commonly used shale reservoir characterization method. However, the quantitative characterization of shale pore structure based on FE-SEM results is still problematic due to the representative issue caused by strong heterogeneity at the microscale. In this study, FE-SEM images of lacustrine shale samples from the Jurassic Ziliujing Formation in the Northeastern Sichuan Basin were systematically analyzed using image processing software. The quantitative pore structure characteristics of each component (including organic matter, clay minerals, quartz and feldspar) in shale samples were extracted from the FE-SEM images. Using the areal porosity and pore size distribution from FE-SEM images, content and density of each component in shale samples and the bulk density of shale samples, the pore volume distribution of each component and the whole shale sample was calculated, which innovatively combined the FE-SEM images with shale compositional information to resolve the representative issue of FE-SEM images and was more practical. This new method could also avoid the effect of ink-bottle pores and isolated pores on shale pore structure characterization commonly existing in high-pressure mercury intrusion porosimetry (HPMIP). The results show that clay mineral pores dominantly contribute to the pore spaces of Ziliujing Formation shale, followed by quartz and feldspar pores, and organic matter (OM) pores contribute the least. The OMs are divided into four categories according to their pore sizes and morphology. More specifically, spongy pores in OM and the cracks within or along the periphery of nonporous OM are the dominant OM pore types in Ziliujing Formation shale. Furthermore, the interaction between clay minerals and organic matter could catalyze the process of pore development in OM, which is confirmed by the higher areal porosities of OMs contacting with clay minerals compared with those not.

geosciences, multidisciplinary
Characterization of the fracture compressibility and its permeability for shale under the effects of proppant embedment and compaction: A preliminary study

Jian-Hua Li,Bo-Bo Li,Qiao-Yun Cheng,Zheng Gao

DOI: https://doi.org/10.1016/j.petsci.2021.12.021

IF: 4.757

2021-12-01

Petroleum Science

Abstract:Hydraulic fracturing technology plays a key role in improving the recovery rate of shale gas. The improvement of permeability in relation to hydraulic fracturing depends on changes brought about by the proppant on the fracture structure in reservoirs. Then it is of great significance to describe the microscopic changes during this process by means of an accurate theoretical model. In this study, based on the heterogeneity of shale fracture and the compaction and embedment of a proppant, we proposed a permeability model to examine the combined effects of a proppant and stress to describe the change mechanism in permeability. Further, changes in fracture width and porosity were considered, and a calculation model of fracture compressibility under proppant compaction and embedment was proposed. The difference from previous studies is that the compressibility and permeability of supported fractures can be further quantified and analyzed by this model. Moreover, its rationality was verified by publicly released test data. The results show that, the compressive effect of stress and the embedding of proppant both have a negative impact on shale permeability.

energy & fuels,engineering, petroleum
Pore Structure Characterization of Lacustrine Shale and its Coupling Relationship with Sedimentary Structure from the Upper Cretaceous Qingshankou Formation, Southern Songliao Basin, NE China

Lei Li,Zhidong Bao,Zhongcheng Li,Li Chen,Yonggang Zhao,Hongyu Zhao,Jianyi Wang,Yu He,Shuyue Ban

DOI: https://doi.org/10.1007/s13369-023-08402-7

IF: 2.807

2024-01-29

Arabian Journal for Science and Engineering

Abstract:Characterizing the microscopic pore systems in shale reservoirs is crucial for understanding their impact on shale oil and gas enrichment. Although significant strides have been made in understanding the pore structure characteristics, research on pore structures related to small-scale sedimentary structures remains limited. This study investigated the multi-scale nanopore structure characterization and its coupling relationship with sedimentary structures using comprehensive analyses of cores, field-emission scanning electron microscopy, and gas (CO2 and N2) physisorption quantification from the Upper Cretaceous Qingshankou Formation, Southern Songliao Basin, NE China. Three lithofacies were identified based on sedimentary structures: wavy laminated shale, horizontally laminated shale, and homogeneously laminated shale. Both organic and inorganic pores (interparticle pores and intraparticle pores) are generally present in shale samples. The pore size distribution displays a multi-peak pattern, with mesopores contributing to approximately 57% of the total pore volume, micropores contributing to about 31%, and macropores accounting for a small portion of the total pore volume. The pore evolution of different lithofacies shales varies due to the influence of clay minerals, quartz content, and total organic carbon (TOC) content, resulting in the substantial heterogeneity and complex pore structure characteristics of existing reservoirs. Additionally, wavy laminated shales are more favorable to lacustrine shale exploration than other lithofacies. This study offers an enhanced methodology for determining which lithofacies may be most advantageous for future shale oil exploitation.

multidisciplinary sciences
Advances in Characterization of Pore System of Gas Shales

JIAO Kun,YAO Suping,WU Hao,LI Miaochun,TANG Zhongyi

DOI: https://doi.org/10.3969/j.issn.1006-7493.2014.01.015

2014-01-01

Abstract:Shale gas is the free, adsorbed and dissolved gas accumulated in dark shale beds. The nature of pores is a key factor to decide gas storing of shale gas reservoir. The structure of gas shales pores is complex, and the pore diameters are mainly in nano-scale. The methods used in conventional gas system study cannot explain high production of shale gas systems in USA. The characterization of nanopores in gas shales plays a key role in shale gas system evaluation. The studies of nanopores in gas shales are reviewed and compared with each other. There are three kinds of shale gas system characterization:(1) Image analysis is based on a stereological analysis, using various types of microscopes such as scanning electron microscopes (SEM), transmission electron microscopes (TEM), scanning tunneling microscope (STM) and atomic force microscopes (AFM);(2) Intrusive methods are based on gas adsorption, mercury porosimetry, and calorimetric methods;(3) Nonintrusive methods are based on radiation scattering, wave propagation, positron lifetime spectroscopy, etc. Image analysis can obtain the morphologic information directly, rapidly and conveniently. Intrusive methods have advantages in characterization of fractal features of pore system. Because of in-situ, non-invasive analysis and high penetrability of neutron and X-ray, nonintrusive methods can simulate the pore system evolution under multi-geological settings. As each method has its own advantages, multi-scale detection using multi-technology is recommended in shale gas pore system characterization.
Characterization of Nanopore Morphology of Shale and Its Effects on Gas Permeability

Jiangtao Zheng,Ziyan Wang,Wenbo Gong,Yang Ju,Moran Wang

DOI: https://doi.org/10.1016/j.jngse.2017.10.004

IF: 5.285

2017-01-01

Journal of Natural Gas Science and Engineering

Abstract:From a microscopic point of view, nano-scale pores are dominant in shale matrix, which provide transport space for natural gas. Accordingly, a pore-scale modeling, which can accurately capture the complex pore morphology and its effects on gas flow behavior, is crucial for understanding the gas transport mechanisms in shale matrix. In this study, the focused ion beam-scanning electron microscope (FIB-SEM) technique was employed to observe and characterize the morphology of the nanopores in shale. Based on the morphology characterizations, three representative porous models (i.e. intergranular pore model, micro-crack model and “honeycomb” pore model) were proposed and generated by numerical methods. The high-Knudsen gas flows in these generated structures were simulated by the lattice Boltzmann method (LBM). A comparison of the simulation results among these three porous models suggests that the nano-scale pore morphology plays an important role in the gas transport properties. Moreover, the high-Knudsen effect leads to a larger apparent permeability for each nano-scale porous model. Our work indicates the importance of the nano-scale pore morphology and the high-Knudsen effect on gas transport properties of shale matrix.
Effects of pore connectivity and water saturation on matrix permeability of deep gas shale

Jiale Zhao,Mengdi Sun,Zhejun Pan,Bo Liu,Mehdi Ostadhassan,Qinhong Hu

DOI: https://doi.org/10.46690/ager.2022.01.05

2022-01-03

Abstract:Shale matrix permeability is an important indicator for evaluating gas transport and production. However, the effects of pore connectivity and water saturation on the matrix permeability in deep gas shales have not been adequately studied. In this study, the permeability of deep shales in the Yichang area of the Middle Yangtze was characterized using three methods. These included the determination of apparent permeability in different directions via pulse-decay, also matrix permeability obtained via the Gas Research Institute method, and the connected pore network permeability via the mercury injection capillary pressure technique. The results revealed a significant difference between the horizontal and vertical permeability of deep shales. The smaller the size of the multiple connected pore network, the larger was the effective tortuosity and the lower the permeability. Comparison of the three permeabilities and combined microscopic observations revealed that microfractures and laminae were the dominant gas transport channels. Importantly, the matrix permeability decreased exponentially with increasing water saturation, with water vapor adsorption experiments revealing that water occupation of pores and pore-throat spaces smaller than 10 nm in diameter was the main reason for this decrease in matrix permeability. Collectively, proposed method of evaluating effective permeability with an index for shale gas reservoirs is significant for sweet spot selection and production prediction of shale gas reservoirs around the globe. Cited as: Zhao, J., Sun, M., Pan, Z., Liu, B., Ostadhassan, M., Hu, Q. Effects of pore connectivity and water saturation on matrix permeability of deep gas shale. Advances in Geo-Energy Research, 2022, 6(1): 54-68. https://doi.org/10.46690/ager.2022.01.05
Microscale Evaluation of Tight Oil Mobility: Insights from Pore Network Simulation

Yongchao Wang,Yanqing Xia,Zihui Feng,Hongmei Shao,Junli Qiu,Suping Ma,Jiaqiang Zhang,Haoyuan Jiang,Jiyong Li,Bo Gao,Lingling Li

DOI: https://doi.org/10.3390/en14154580

IF: 3.2

2021-07-28

Energies

Abstract:Pore network modeling based on digital rock is employed to evaluate the mobility of shale oil in Qingshankou Formation, Songliao Basin, China. Computerized tomography technology is adopted in this work to reconstruct the digital rock of shale core. The pore network model is generated based on the computerized tomography data. We simulate the dynamics of fluid flow in a pore network model to evaluate the mobility of fluid in shale formation. The results show that the relative permeability of oil phase increases slowly in the initial stage of the displacement process, which is mainly caused by the poor continuity of the oil phase. In the later stages, with the increase in the oil phase continuity, the range of relative permeability increases. With the increase of organic matter content, the permeability of the water phase remains unchanged at low water saturation, but gradually increases at high water saturation. At the same time, it can be seen that, with the increase in organic matter content, the isosmotic point of the oil–water phase permeability shifts to the left, indicating that the wettability to water phase gradually weakens.

energy & fuels

An Innovative Percolation Theory‐based Method for Characterizing Shale Pore Connectivity

A method for analyzing nanopore connectivity of shale using a fluid suction experiment

Characterization of Flow Parameters in Shale Nano-Porous Media Using Pore Network Model: A Field Example from Shale Oil Reservoir in Songliao Basin, China

Pore connectivity and water accessibility in Upper Permian transitional shales, southern China

Shale pore connectivity and influencing factors based on spontaneous imbibition combined with a nuclear magnetic resonance experiment

The impact of pore heterogeneity on pore connectivity and the controlling factors utilizing spontaneous imbibition combined with multifractal dimensions: Insight from the Longmaxi Formation in Northern Guizhou

An Apparent Permeability Model in Organic Shales: Coupling Multiple Flow Mechanisms and Factors

Research on an effective permeability prediction method for shale reservoirs based on imbibition experiments

Pore-Scale Geometry Effects on Gas Permeability in Shale

Analytical Model of Shale Gas Permeability Based on the Pore Size Distribution from FE-SEM and Image Analysis

An anisotropic pore-network model to estimate the shale gas permeability

Research on the Shale Porosity–TOC Maturity Relationship Based on an Improved Pore Space Characterization Method

Investigations of Water Transport in Shale Reservoir with Dual-Wettability by Using Monte Carlo Method

A field study of pore-network systems on the tight shale gas formation through adsorption-desorption technique and mercury intrusion capillary porosimeter: Percolation theory and simulations

A new and integrated imaging and compositional method to investigate the contributions of organic matter and inorganic minerals to the pore spaces of lacustrine shale in China

Characterization of the fracture compressibility and its permeability for shale under the effects of proppant embedment and compaction: A preliminary study

Pore Structure Characterization of Lacustrine Shale and its Coupling Relationship with Sedimentary Structure from the Upper Cretaceous Qingshankou Formation, Southern Songliao Basin, NE China

Advances in Characterization of Pore System of Gas Shales

Characterization of Nanopore Morphology of Shale and Its Effects on Gas Permeability

Effects of pore connectivity and water saturation on matrix permeability of deep gas shale

Microscale Evaluation of Tight Oil Mobility: Insights from Pore Network Simulation