Abstract:Abstract The influence of pool length on the strength of turbulence generated by vortex shedding was investigated in a 6 m long recirculating flume. The experiment utilized a 38% constriction of flow and an average channel‐bed slope of 0·007. The base geometry for the intermediate‐length pool experiment originated from a highly simplified, 0·10 scale model of a forced pool from North Saint Vrain Creek, Colorado. Discharge in the flume was 31·6 l/s, which corresponds to a discharge in the prototype channel of 10 m 3 /s. Three shorter and four longer pool lengths also were created with a fixed bed to determine changes in turbulence intensities and energy slope with pool elongation. Three‐dimensional velocities were measured with an acoustic Doppler velocimeter at 31–40 different 0·6‐depth and near‐bed locations downstream of the rectangular constriction. The average velocity and root mean square (RMS) of the absolute magnitude of velocity at both depths are significantly related to the distance from the constriction in most pool locations downstream of the constriction. In many locations, pool elongation results in a non‐linear change in turbulence intensities and average velocity. Based on the overall flow pattern, the strongest turbulence occurs in the center of the pool along the shear zone between the jet and recirculating eddy. The lateral location of this shear zone is sensitive to changes in pool length. Energy slope also was sensitive to pool length due to a combination of greater length of the pool and greater head loss with shorter pools. The results indicate some form of hydraulic optimization is possible with pools adjusting their length to adjust the location and strength of turbulent intensities in the center of pools, and lower their rate of energy dissipation. Copyright © 2004 John Wiley & Sons, Ltd.

The influence of pool length on local turbulence production and energy slope: a flume experiment