Abstract:In this paper, dynamic modeling of a reconfigurable wheel-legged robot is proposed using a geometric constraint based on independent coordinates. The main contribution of this research is the use of a geometric constraint for the body's rotational angle and using the Gibbs–Appell method instead of traditional modeling approaches to avoid complex constraint equations, significant computational burden, and simulation time. This study necessitates some assumptions in order to develop constraint equations and calculate Gibbs functions due to the presence of nonholonomic constraints on the wheels and the requirement for the robot to move simultaneously in x- and z-directions to execute distinct tasks. With the proposed approach, dynamic equations are obtained without determining the Lagrangian coefficients. In addition, because of the particular form of the Gibbs equations, fewer partial derivatives are necessary to derive the equations from which the joints torques are calculated in terms of the quasi-coordinates. In addition to spatial vector relations, a geometric constraint is used to construct kinematic modeling, requiring other coordinates to be explicitly obtained in terms of quasi-coordinates in the dynamic formulation. Simulation results in various modes of motion to change the height of the robot while proceeding in its course and the associated motor torques, are verified experimentally using a WLRIUST robot. Finally, simulation results for several test scenarios are presented, demonstrating the overall performance of the robot with four double-link legs. Relevant simulation results are also compared to those obtained with the Adams software. The performance of the robot's movements and the torques applied to the motors by relevant changes in the quasi-coordinates are also examined. The results show MATLAB and Adams modeling differ nearly 1%, and with experimental tests differ about 5 to 10%.

A 3D Generic Inverse Dynamic Method using Wrench Notation and Quaternion Algebra

A Joint Physical Constraints Avoidance Method for Inverse Kinematics Problem of Redundant Humanoid Manipulator

Kinematics and Dynamics Modeling of 7 Degrees of Freedom Human Lower Limb Using Dual Quaternions Algebra

Novel inverse kinematic approaches for robot manipulators with Pieper-Criterion based geometry

Improved Inverse Kinematics Algorithm Using Screw Theory for a Six-DOF Robot Manipulator

Inverse Dynamics of a Novel Cylinder 3-DOF Spatial Parallel Manipulator

Inverse Dynamics and Simulation of a 3-DOF Spatial Parallel Manipulator.

Modular Computational Method for Inverse Dynamics of Planar 3-DOF Parallel Manipulators

An Improved Unit Quaternion for Attitude Alignment and Inverse Kinematic Solution of the Robot Arm Wrist

Inverse kinematics and dynamics of a 3-DOF spatial parallel manipulator

Modeling and Analysis of the Dynamics of an Omni-directional Mobile Manipulators System

A Method For Solving The Inverse Kinematics Problem Of 6-Dof Space Manipulator

Dynamic modeling of three-dimensional muscle wrapping based on absolute nodal coordinate formulation

An innovative joint-space dynamic theory for rigid multi-axis system - part II: Canonical dynamic equations

Kinematic and dynamic analysis of a nonholonomic wheel-legged robot using Gibbs–Appell formulation

Inverse Kinematics and Dynamics of A Novel 3-Axis Hybrid Machine Tools

Inverse Dynamics of the 6-Dof Out-Parallel Manipulator by Means of the Principle of Virtual Work

Review study of using Euler angles and Euler parameters in multibody modeling of spatial holonomic and non-holonomic systems

Geometric Approach for Inverse Kinematics Analysis of 6-Dof Serial Robot.

Simplified inverse dynamic models of parallel robots based on a Lagrangian approach

General inverse dynamic analysis of Gough-Stewart platform