Abstract:Abstract. Terrestrial laser scanners are powerful measurement devices commonly used for 3D modelling tasks generating large volumes of data with fast acquisition as a first priority. However, these scanners can alternatively be used to produce near real-time, engineering quality spatial data concerning the changing state of manufactured components. This paper provides a comprehensive analysis of two terrestrial laser scanners capturing aerospace materials and components, and their associated quality measures. In order to explore the limitations of the tested TLS instruments, a mechanical jig was designed incorporating both a rotation and translation stage. This study involved three elements of a point cloud processing workflow: data capture, registration and feature extraction. Sphere-based 7DoF registration is applied using two different commercially available software packages with varying levels of user control. To analyse the quality of the registration, control points extracted from captured point clouds were compared to nominal values measured using a laser tracker. The quality of the registration was consistent, with differences kept between 0.4 mm and 0.6 mm. To evaluate the quality of the captured point clouds, two different tests were conducted. This included planar fit tests on an aluminium drilling template, and sphere fitting tests on white 1.5” spherical targets in magnetic nests. One half of the aluminium drilling template was coated with matte spray to reduce erroneous laser reflections. Finally, the registered point clouds were input to a developed algorithm which automatically extracted drilling holes from the drilling template. Previous scanning work performed on aerospace materials showed evidence of optical rattling caused by high intensity reflections from the interior holes in a drilling template. Further exploration showed that the amount of optical rattle varies systematically with incidence angle. This work demonstrates a systematic offset in the location of extracted hole centres in the drilling template. This offset is dependent on laser incidence angle, and can therefore be accounted for when locating manufacturing components from a known scanning position.

3D modelling of industrial piping systems using digital photogrammetry and laser scanning

3D Reconstruction of Small-diameter Pipes Inner Surface Based on Structural Light

Photoelectric Detection and 3D Reconstruction System for the Inner Surface of Small-Diameter Pipes

Application Research of Three-Dimensional Technology Aided Design of New Pipe Inserting into Underground Pipe

Application of 3D laser scanning technology in engineering field

The Combined Use of Terrestrial Laser Scanner and Handheld 3D Scanner for 3D Modeling of Piping Instrumentation at Oil and Gas Company

Scanning method of robot-3D scanner system and its industrial application

Automatic Detection and Modeling of Underground Pipes Using a Portable 3D LiDAR System

Three-Dimensional-Scanning of Pipe Inner Walls Based on Line Laser

Axial-Stereo 3-D Optical Metrology for Inner Profile of Pipes Using a Scanning Laser Endoscope

Three-dimensional laser scanning for structure documentation and construction management: A case study of renovation and rebuilt of metro tunnels

An autonomous multisensor in situ metrology system for enabling high dynamic range measurement of 3D surfaces on precision machine tools

Application of Terrestrial Laser Scanner in engineering survey

Development of an In-Situ Laser Machining System Using a Three-Dimensional Galvanometer Scanner

EXPLORING THE LIMITS OF TERRESTRIAL LASER SCANNERS ON AEROSPACE MATERIALS

Application of Laser Scanning Technology to 3d Urban Landscape Modeling

Application of Photogrammetry Technology to Industrial Inspection

Design and Development of Digital Coordinate System for Space Pipeline

System for 3D Acquisition and 3D Reconstruction using Structured Light for Sewer Line Inspection

High-accuracy Real-Time Omnidirectional 3D Scanning and Inspection System

3D Point Cloud Acquisition and Correction in Radioactive and Underwater Environments Using Industrial 3D Scanners