Abstract:An equiatomic CoCrFeMnNi high-entropy alloy, which crystallizes in the face-centered cubic (fcc) crystal structure, was produced by arc melting and drop casting. The drop-cast ingots were homogenized, cold rolled and recrystallized to obtain single-phase microstructures with three different grain sizes in the range 4–160μm. Quasi-static tensile tests at an engineering strain rate of 10−3s−1 were then performed at temperatures between 77 and 1073K. Yield strength, ultimate tensile strength and elongation to fracture all increased with decreasing temperature. During the initial stages of plasticity (up to ∼2% strain), deformation occurs by planar dislocation glide on the normal fcc slip system, {111}〈110〉, at all the temperatures and grain sizes investigated. Undissociated 1/2〈110〉 dislocations were observed, as were numerous stacking faults, which imply the dissociation of several of these dislocations into 1/6〈112〉 Shockley partials. At later stages (∼20% strain), nanoscale deformation twins were observed after interrupted tests at 77K, but not in specimens tested at room temperature, where plasticity occurred exclusively by the aforementioned dislocations which organized into cells. Deformation twinning, by continually introducing new interfaces and decreasing the mean free path of dislocations during tensile testing (“dynamic Hall–Petch”), produces a high degree of work hardening and a significant increase in the ultimate tensile strength. This increased work hardening prevents the early onset of necking instability and is a reason for the enhanced ductility observed at 77K. A second reason is that twinning can provide an additional deformation mode to accommodate plasticity. However, twinning cannot explain the increase in yield strength with decreasing temperature in our high-entropy alloy since it was not observed in the early stages of plastic deformation. Since strong temperature dependencies of yield strength are also seen in binary fcc solid solution alloys, it may be an inherent solute effect, which needs further study.

Anomalous temperature dependence of the yield strength in IVa-VIII intermetallic compounds with B2 structure

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Microstructure characterization and mechanical properties of AB-typed high-entropy intermetallics with high strength and thermal stability

Mechanical Properties of the Al3(TiTaZrNbHf) High Entropy Intermetallic Compound: A Molecular Dynamic Study

Effect of microstructure on temperature dependence of deformation behavior in polycrystalline CoNi-based superalloy

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

Yield-stress anomaly in equiatomic ZrNbTiVHf high-entropy alloys

The Temperature Dependence of High-Temperature Strength and Deformation Mechanism in a Single Crystal CoNi-base Superalloy

The evolution of dual-phase core-shell structure and mechanical properties induced by Co addition in as-cast high-entropy intermetallic

Strain-Rate-Dependent Deformation Behavior of Ti29Zr24Nb23Hf24 High Entropy Alloys at Elevated and Room Temperature

Temperature-dependent yield stress of single crystals of non-equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloys in the temperature range 10-1173 K

Temperature-induced structure evolution in CoxBy liquids studied by ab initio molecular dynamics simulation

Atomistic modeling for the extremely low and high temperature-dependent yield strength in a Ni-based single crystal superalloy

Alloying effect on the ideal tensile strength of ferromagnetic and paramagnetic bcc iron

Twinning-induced pseudoelastic behavior in (MoW)$_{85}$(TaTi)$_{7.5}$Zr$_{7.5}$

Effects of alloying elements on the atomic structure, elastic and thermodynamic properties of L12-Co3(V, Ti) compound

First-principles study of exchange stiffness constant of half-metallic Heusler alloys Co2MnZ (Z= Si, Al) at finite temperatures: Spin fluctuation-induced effective half metallicity

Effect of Alloying Elements on the High-Temperature Yielding Behavior of Multicomponent γ'-L12 Alloys

Mechanical properties of the novel L12-Ir3Z ultra-high temperature alloys (Z = Ti, V, Zr, Nb, Hf and Ta)

Interface compatibility-induced quasi-volume-preserving martensitic phase transition in all-d-metal Co2NiT (T=Ti and V) Heusler compounds

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys