Abstract:The contamination of water resources by emerging contaminants, such as heavy metals and textile effluents, poses significant ecological and human health risks. Conventional effluent treatment plants may not effectively degrade all types of pollutants, resulting in the contamination of natural water resources. Photocatalysis, specifically the photo-Fenton reaction, has emerged as an efficient sustainable cost-effective method for the removal of pollutants. In this study, three batches (CF-1, CF-2, and CF-3) of copper ferrite nanoparticles (NPs) were synthesized and used as photocatalysts for the degradation of methylene blue (MB) dye and reduction of hexavalent chromium (Cr(VI)) under visible light. The CF-1, CF-2, and CF-3 required (90, 75, and 60 min.) different periods to reach a nearly similar degradation percentage, i.e., 90%, wherein the CF-3 batch demonstrated better catalytic activity. The successful synthesis of copper ferrite NPs was confirmed by XRD analysis which reveals the CuFe 2 O 4 phase. With the increased concentration of copper, the formation of the CuO phase alongside the CuFe 2 O 4 phase was observed. The CF-3 catalyst had a surface area of 44.496 m 2 /g according to BET studies. The catalyst exhibited a pore radius of 19.175 Å and an adsorption pore volume of 0.109 cc/g, as determined by the BJH method. TEM micrographs showed spherical-shaped NPs with sizes ranging from 55 to 60 nm. The photo-Fenton process was optimized by varying dye concentration, pH, catalyst, and hydrogen peroxide (H 2 O 2 ) dosages for MB degradation. The scavenger study reveals the contribution of the •OH radical over •O 2 − radical in the photo-Fenton process for MB degradation. The reduction of Cr(VI) was optimized by adjusting pH and Cr load. The CF-3 catalyst exhibited almost complete degradation of MB (32 mg/L) within 60 min and reduction of Cr(VI) (100 mg/L) within 20 min. The good reusability of the catalyst exhibits 71.4% MB degradation after four cycles and 78.34% Cr(VI) reduction after five cycles. The regression coefficient ( R 2 ) of the pseudo-second-order reaction was close to 1 and higher than the pseudo-first-order reaction. The catalyst achieved 0.0540 and 0.1047 1/min kinetic constant at pseudo-first-order reaction, while 0.0614 and 0.0497 L/mg.min kinetic constant was achieved at pseudo-second-order reaction for MB degradation and Cr(VI) reduction. These kinetic studies proved that the dye degradation and chromium reduction follow the pseudo-second-order reaction ( R 2 ). The overall study demonstrates the promising potential of magnetic CF-3 nanoparticles as efficient catalysts for industrial applications in dye degradation and Cr(VI) reduction.

Sm-substituted copper-cobalt ferrite nanoparticles: Preparation and assessment of structural, magnetic and photocatalytic properties for wastewater treatment applications

Merits of photocatalytic activity of synthesized (ZnxCu(1−x)Fe2O4); x = (0–1) magnetic nanoparticles for wastewater treatment

Magnetic separation, sunlight-driven photocatalytic activity, and antibacterial studies of Sm-doped Co0.33Mg0.33Ni0.33Fe2O4 nanoparticles

Bi 3+ doping-enhanced optical and photocatalytic activity with stability of cobalt nickel zinc ferrites for wastewater treatment applications

Effect of irradiation on Co0.72Sr0.07Ni0.21Fe2O4 ferrite nanoparticles and their catalytic efficiency in water treatment

Photocatalytic Activity of Zero-Valent Iron Nanoparticles Highly Dispersed on Porous Carbon Materials

Catalytic and kinetic studies of CuFe2O4 as a superior heterogeneous nanocatalyst for dye degradation and Cr(VI) reduction

Synthesis, Characterization, and Adsorption Performance of (Mg0.4Co0.4Mn0.2)Fe2−2xSmxSnxO4 Nanoparticles for the Removal of Heavy Metal Ions and Water Treatment

Cobalt and holmium co-doped nickel ferrite nanoparticles: synthesis, characterization and photocatalytic application studies

Copper substituted spinel Co–Cr spinel Ferrites@Graphitic carbon nitride nanocomposite as a visible light active photocatalytic material

New chitosan schiff base-modified ferrite: Mechanistic insights and performance enhancement in photocatalysis and antibacterial applications

Co+2, Ni+2 and Cu+2 incorporated Bi2O3 nano photocatalysts: Synthesis, DFT analysis of band gap modification, adsorption and photodegradation analysis of rhodamine B and Triclopyr

Magnetic Photocatalytic Nano-semiconductors Prepared from Carbon Quantum Dots Compounded with Copper Ferrate and Their Application in Dye Wastewater Treatment

Synthesis of Ce and Sm Co-Doped TiO2 Nanoparticles with Enhanced Photocatalytic Activity for Rhodamine B Dye Degradation

Ni and La substitution of Cobalt nanoferrites preparation: structural, magnetic, and dielectric studies and photocatalytic activity for waste water treatment

Sm Doped Cu–Ni Spinel Ferrite Nanoparticles for Hyperthermia and Photocatalytic Applications

Pure and Ce-doped spinel CuFe2O4 photocatalysts for efficient rhodamine B degradation

(Y3+/Sm3+)-doped and co-doped CoFe2O4 for heterogeneous advanced oxidation process: structural, magneto-optical, and photocatalytic investigations

Study the influence of silver and cobalt on the photocatalytic activity of copper oxide nanoparticles for the degradation of methyl orange and real wastewater dyes

Enhanced Photocatalytic and Antimicrobial Performance of Divalent Metal Substituted Nickel Nanostructures for Wastewater Treatment and Biological Applications

Effect of Cu2+ Ions Substitution on Structure and Photocatalytic Activity of CuxNi1−xFe2O4 Nanoparticles