Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Estimation of vibration stability in milling of thin-walled parts using operational modal analysis

Operational modal analysis based dynamic parameters identification in milling of thin-walled workpiece

A complete methodology for identifying dynamics of heavy machine tool through operational modal analysis

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Sensitivity Analysis and Monte Carlo Based Uncertainty Quantification of the In-process Modal Parameters in Milling

Modal parameter identification of general cutter based on milling stability theory

Output-Only Time-Varying Modal Parameter Identification Method Based on the TARMAX Model for the Milling of a Thin-Walled Workpiece

Milling Stability Prediction for Flexible Workpiece Using Dynamics of Coupled Machining System

Investigation on chatter stability of thin-walled parts milling considering the effects of fixture support force and tool position

Robust Chatter Stability Prediction of the Milling Process considering Uncertain Machining Positions

Reliability analysis of chatter stability for milling process system with uncertainties based on neural network and fourth moment method

Chatter Stability Prediction of Ball-End Milling Considering Multi-Mode Regenerations

Operational Modal Analysis of CNC Machine Tools Based on Flank-Milled Surface Topography and Cepstrum

Stability Analysis of Milling Based on the Barycentric Rational Interpolation Differential Quadrature Method

An efficient and precise stability analysis method for milling process

A data-driven framework for predicting machining stability: employing simulated data, operational modal analysis, and enhanced transfer learning

Operational modal analysis of a machine-tool structure during machining operations

Development of a novel online chatter monitoring system for flexible milling process

Chatter stability analysis and prediction for elliptical ultrasonic vibration-assisted milling process

Research on vibration behavior and chatter stability of big-sized gear hobbing machine

Digital Modeling-Driven Chatter Suppression for Thin-Walled Part Manufacturing