Bioprocess Development for 2,3-Butanediol Production from Crude Glycerol and Conceptual Process Design for Aqueous Conversion into Methyl Ethyl Ketone

Sofia Maina,Endrit Dheskali,Harris Papapostolou,Aline Machado de Castro,Denise Maria Guimaraes Freire,George J. E. Nychas,Seraphim Papanikolaou,Ioannis K. Kookos,Apostolis Koutinas
DOI: https://doi.org/10.1021/acssuschemeng.1c00253
2021-06-21
Abstract:The transition to the circular economy era necessitates the sustainable production of chemicals using crude renewable resources via integrated biological and chemical conversion routes. Within this concept, this study combined experimental fermentation development with conceptual process design and technoeconomic evaluation to demonstrate the feasibility of bio-based methyl ethyl ketone (MEK) production from crude glycerol derived from industrial biodiesel production using soybean oil alone or mixed with tallow fat. 2,3-Butanediol (BDO) production via fermentation of crude glycerol was initially developed using a Klebsiella michiganensis strain leading to 76.1 g/L BDO concentration with a productivity of 1.38 g/(L h) at a volumetric mass transfer coefficient of 77 h–1. Direct aqueous BDO conversion into MEK followed by purification via pressure swing distillation was subsequently evaluated via conceptual process design. The bio-based MEK minimum selling price (MSP) is close to the 11 year average market price of petroleum-derived MEK ($1.8/kg) when the crude glycerol cost is up to $0.1/kg at annual MEK production capacities higher than ca. 20 000 t. Monte Carlo simulations showed ca. 30% probability of obtaining an MSP lower than $1.8/kg at a crude glycerol cost of $0.1/kg. This study demonstrated the feasibility of cost-competitive bio-based MEK production as an industrial solvent and an intermediate chemical.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c00253.Residue curve maps of the ternary system ethanol–MEK–water at 1 bar and 6.8 bar, Figure S1; effect of temperature on BDO production is, Figure S2; BDO and DCW production during fed-batch fermentation using pure and crude glycerol using different kLa values, Figure S3; organic acid and ethanol production during fed-batch fermentation using pure and crude glycerol using different kLa values, Figure S4; BDO, formic acid, acetic acid, ethanol, and DCW production along with glycerol consumption, glycerol-to-BDO conversion yield, and productivity during fed-batch fermentation using crude glycerol 100-So at a kLa value of 77 h–1, Figure S5; optimal design parameters for BDO production from crude glycerol and VHP cane sugar, Table S1; and data on the estimation of FCI for VHP cane sugar utilization and cost of manufacture parameters for both feedstocks, Tables S2–S7 (PDF)This article has not yet been cited by other publications.
chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
What problem does this paper attempt to address?