Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

EFFECTS OF PARTICLE SIZE DISTRIBUTION AND WATER CONTENT AT COMPACTION ON SATURATED HYDRAULIC CONDUCTIVITY AND STRENGTH OF HIGH SAND CONTENT ROOT ZONE MATERIALS

Interactive Influence of Water and Fines Contents on the Strength of Compacted Cement-Stabilized Clayey Sands: Insights and Predictive Framework

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Stabilization Nature and Unified Strength Characterization for Cement-Based Stabilized Soils

Effect of Fines Content on the Compression Behavior of Calcareous Sand

Study on the Effect of Water Content on Rock Strength and Sand Production

Effects of fine content on the mechanical properties and breakage behavior of gap-graded coral sand

Effects of pore structure on the hysteretic water retention behaviour of silty sand at different stresses

Effect of Fines Content on Pore Distribution of Sand/Clay Composite Soil

STUDY ON EFFECTS OF SAND CONTENT ON STRENGTH OF POLYPROPYLENE FIBER REINFORCED CLAY SOIL

Effect of Sand Content on Properties of Self-Consolidating, High-Performance Cementitious Mortar

Effects of Compaction Water Content on Water Retention and Deformation Behavior of Compacted Loess

Effects of Compaction State on Structural Strength of a Clayey Soil As Determined by Micropenetrometer Tests

Effect of Bermuda grass root on mechanical properties of soil under dry–wet cycles

Investigation on the mechanical properties of a calcareous sand: the role of the initial fabric

Compressibility and Permeability of Sand-Silt Tailings Mixtures

Experimental study on the effects of water content on the compression characteristics and particle breakage of calcareous sand

High-Strain Rate Compressive Behavior of Dry Mason Sand Under Confinement

Effect of Sand Content on Strength and Pore Structure of Cement Mortar

The Effects of Soil Solution Electrical Conductivity and Sodium Adsorption Ratio on Soil Liquid Limit and Soil Strength

Effect of particle size and gradation on compressive strength of MICP-treated calcareous sand