Abstract:In a detailed study, new insights are enabled into the performance and the degradation mechanisms of carbon‐based mesoscopic perovskite solar cells. Even if ammonium valeric acid iodide‐based perovskite highlights a higher potential for species diffusion and interface contamination (highlighted by the dependence of the current‐voltage characteristics on the scan rate), they also perform better and longer. As perovskite photovoltaic devices can now compete with silicon technology in terms of efficiency, many strategies are investigated to improve their stability. In particular, degradation reactions can be hindered by appropriate device encapsulation, device architecture, and perovskite formulation. Mesoporous device architectures with a carbon electrode offer a plausible solution for the future commercialization of perovskite solar cells. They represent a low‐cost and stable solution with high potential for large‐scale production. Several studies have already demonstrated the potential of the mixed 2D/3D ammonium valeric acid iodide‐based MAPbI3 formulation to increase the lifetime of pure MAPbI3. They can however not describe the mechanisms responsible for the lifetime improvement. Using a full set of characterization techniques in the initial state and as a function of time during damp‐heat aging, new insights into the performance and degradation mechanisms may be observed. With (5‐AVA)0.05MA0.95PbI3, the solar cells are very stable up to 3500 h and the degradation of performances essentially results from the loss of electrical contacts mainly located at the interfaces. In contrast, for the neat MAPbI3, a poor stability is evidenced (T50 = 500 h) and the loss in performance results from the degradation of the bulk perovskite layer itself.

Impact of Amine Additives on Perovskite Precursor Aging: A Case Study of Light-Emitting Diodes

Tuning Precursor-Amine Interactions for Light-Emitting Lead Bromide Perovskites

Unraveling Differences in the Effects of Ammonium/Amine-Based Additives on the Performance and Stability of Inverted Perovskite Solar Cells

Variation of the Methylamine Lead Iodine Precursor Thin Films During Aging and Its Influence on the Subsequent Perovskite Thin Films

How Ammonium Valeric Acid Iodide Additive Can Lead to More Efficient and Stable Carbon‐Based Perovskite Solar Cells: Role of Microstructure and Interfaces?

Decoupling the Positive and Negative Aging Processes of Perovskite Light-Emitting Diodes Using a Thin Interlayer of Ionic Liquid.

Reactive Passivation of Wide-Bandgap Organic-Inorganic Perovskites with Benzylamine

The Possible Side Reaction in the Annealing Process of Perovskite Layers

Extending Shelf‐life of Two‐step Method Precursor Solutions through Targeted Regulation for Highly Efficient and Reproducible Perovskite Solar Cells

Small amines bring big benefits to perovskite-based solar cells and light-emitting diodes

Enhanced Efficiency and Stability of Inverted Perovskite Solar Cells via Primary Amine Molecular Reaction

What are Methylammonium and Solvent Fates upon Halide Perovskite Thin‐Film Preparation and Thermal Aging?

Uncovering the Nanoscopic Humidity Ingression in Multifunctional Addivated Halide Perovskites

Revealing the Impact of Aging on Perovskite Solar Cells Employing Nickel Phthalocyanine-Based Hole Transporting Material

Stabilizing perovskite precursors with the reductive natural amino acid for printable mesoscopic perovskite solar cells

Solution Aging Promotes the Formation of Hexagonal Polytypes in Mixed-Cation/-Halide Perovskites

Enhanced Performance of Perovskite Light-emitting Diodes via Phenylmethylamine Passivation

A Review on Additives for Halide Perovskite Solar Cells

Post-annealing of MAPbI3 Perovskite Films with Methylamine for Efficient Perovskite Solar Cells

A Practical Approach Toward Highly Reproducible and High-Quality Perovskite Films Based on an Aging Treatment

Ammonium Additive Engineering in Antisolvents for Improving Perovskite/Charge-Transport-Layer Interfaces Toward Efficient Lead-Tin Alloyed Perovskite Solar Cells