Abstract:We report here the first coupling of fast GC to IRMS, in a system capable of 250 ms peak widths (fwhm) at 1 mL/min flow rates, one-fifth as narrow as any previously reported GCC-IRMS system. We developed an optimized postcolumn interface that results in minimal peak broadening, using a programmable temperature vaporization injector in place of a rotary valve or backflush system to divert solvent, a narrow capillary combustion reactor followed by a cryogenic water trap with narrow-bore (< 0.20 mm We transfer lines, and a narrow W. open split to the IRMS directly inserted into the column effluent. Quantitative combustion was demonstrated with CH4 injections. A comparison of CO2 injections with different fwhm peak widths (250, 2500, and 7500 ms) showed similar precisions, SD(delta C-13) = 0.2-0.3 parts per thousand, for injections of > 600 pmol C on column; precision for the narrow peaks (250 ms) was considerably better for injections < 150 pmol C on column. SD(delta C-13) < 1 parts per thousand was achievable for injections of 5-15 pmol on column for 250 ms wide peaks, 10-fold better precision than 2500 ms wide peaks, and within a factor of 3 of the counting statistics Emit For a mixture of 15 fatty acid methyl esters (FAME), 1.5 nmol C of each on column yielded typical SD(delta C-13(pdb)) = 0.4 parts per thousand for fast GC and 0.5%o for conventional GC. For 14 of the 15 FAME, delta C-13 values between the two systems were within 1.5 parts per thousand and not significantly different Fast GCC-IRMS required one-third the run time (450 s vs 1400 s) to achieve comparable resolution. Mean peak widths for fast GCC-IRMS of the FAME were 720 ins, compared to 650 ms by fast GC with flame ionization detection. At a 15-fold dilution (100 pmol C on column for each FAME), fast GCC-IRMS achieved -2-fold better precision and accuracy than similar injections on conventional GCC-ERMS. Finally, a mixture of 10 steroids (similar to 7 nmol C (100 ng) each on column) was analyzed with mean precision of SD)(delta C-13) = 0.2 parts per thousand in 620 s by fast GCC-IRMS, while conventional GCC-IRMS required 1200 s and achieved poorer resolution. delta C-13 values for the two system were similar (Delta delta C-13 <=:5 2 parts per thousand for all steroids), indicating that accuracy is not compromised. In summary, fast GCC-IRMS can achieve similar precision to conventional GC with considerable time savings for standard sample sizes (> 1 nmol C) and achieves modest precision (similar to 1 parts per thousand) near the counting statistics limit on low level components.

Functional Group Analysis of Interferometric Data from Gas Chromatography Fourier Transform Infrared Spectroscopy

Simultaneous Determination of C, H, N, O, F, Cl, Br, and S in Gas Chromatographic Effluent by Fourier Transform Red/Near-Infrared Atomic Emission Spectroscopy

[Fourier transformation infrared spectrometry--a new (old) method of detection in forensic chemistry and criminal investigation]

Parallel coupling of gas chromatography to mass spectrometry and solid deposition Fourier transform infrared spectroscopy: an innovative approach to address challenging identifications

Calibration transfer algorithm for automated qualitative analysis by passive Fourier transform infrared spectrometry

Experimental methods in chemical engineering: Fourier transform infrared spectroscopy—FTIR

Advance of Development and Application of GC-IR Technology

Fire Smoke Gases Analysis By Ft-Ir Spectrometer

Quantitative Analysis of Multi-component with FTIR and Its Application

Fast gas chromatography combustion isotope ratio mass spectrometry.

Quantitative Analysis Method for the Fourier Transform Infrared Spectroscopy of Gases

Processing GC-FTIR by the Blind Source Separation

System Design for Integrated Comprehensive and Multidimensional Gas Chromatography with Mass Spectrometry and Olfactometry

Infrared Spectral Analysis for Prediction of Functional Groups Based on Feature-Aggregated Deep Learning

On-Line and In-Situ Spectral Analysis of Multicomponent Gas Mixture with Same Molecular Group

Infrared Spectroscopy in Environmental Analysis

Nonlinear interferometer for Fourier-transform mid-infrared gas spectroscopy using near-infrared detection

Application of Chemometrics Approaches to Analysis of Mid-Infrared Spectra of Ibuprofen Diluted in Supercritical Carbon Dioxide

Fourier Transform Infrared Greenhouse Analyzer for Gases and Carbon Isotope Ratio

High-throughput approach for analysis of multicomponent gas chromatographic-mass spectrometric signals.

Untargeted Region of Interest Selection for GC-MS Data using a Pseudo F-Ratio Moving Window ($ψ$FRMV)