Abstract:Single-reactor CO2 conversion to light olefins via methanol is currently obstructed by the incompatible reaction conditions for the CO2 to methanol and methanol to olefin steps. The conventional Cu/ZnO-Al2O3 CO2 hydrogenation catalysts produce excessive CO and rapidly deactivate at the high temperatures preferred for methanol to olefins with zeolite or SAPO catalysts. ZnxZrOy catalysts are a promising alternative to Cu/ZnO-Al2O3. We studied ZnxZrOy with varying Zn doping levels, using XRD, XPS, H2-TPR, CO2-TPD, N2-physisorption, DRIFT, and Raman spectroscopy, along with CO2 conversion and methanol selectivity measurements, to examine structure-performance relationships in CO2 hydrogenation to methanol. The interplay between dopant concentration, calcination temperature, and crystal structure dictates the catalyst's phase composition, which correlates with catalytic performance. The pristine ZrO2 is a mixture of tetragonal and monoclinic phases. At Zn/Zr=0.01, the tetragonal phase is dominant, while for Zn/Zr=0.07-0.28, the cubic phase is obtained. Above Zn/Zr=0.28, phase separation of ZnO occurs. For CO2 hydrogenation to methanol, a Zn/Zr=0.07-0.28 performs best. Zinc addition increases catalyst surface area, pore volume, basicity, and reducibility. XPS analysis reveals zinc enrichment near the surface and the formation of Zr−O−Zn species upon Zn incorporation into ZrO2. A clear correlation between Zn content and catalyst activity is generally absent, but this relationship becomes evident in cubic-phase materials. At least in part, the relevance of zinc doping for CO2 to methanol lies in its ability to distort the structure of zirconia, creating a cubic phase, with implications for selectivity that correlate with the adsorption of CO2 and H2.

Following the structure of copper-zinc-alumina across the pressure gap in carbon dioxide hydrogenation

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

The structure–activity interactions of Cu/Zn, In/Pd and Fe/K catalysts supported on mesoporous SBA-15 for carbon dioxide hydrogenation at low pressure

High-pressure in situ X-ray absorption fine structure measurements for hydrogenation of CO 2 to methanol over Zn-doped ZrO 2

The unique interplay between copper and zinc during catalytic carbon dioxide hydrogenation to methanol

Bridging the Pressure Gap in CO Oxidation

The Role of Cu1–O3 Species in Single-Atom Cu/ZrO2 Catalyst for CO2 Hydrogenation

Kinetically Relevant Variation Triggered by Hydrogen Pressure: A Mechanistic Case Study of CO2 Hydrogenation to Methanol over Cu/ZnO

Identification of the Active Sites on ZnO/ZrO2 for CO2 Hydrogenation to CO and Methanol

Mechanistic Study of Carbon Dioxide Hydrogenation over Pd/ZnO‐Based Catalysts: The Role of Palladium–Zinc Alloy in Selective Methanol Synthesis

Synthesis of a Cu@ZnO1-x/Al2O3 Catalyst with High-Density ZnO1-x-Cu Interfacial Sites for Enhanced CO2 Hydrogenation to Methanol

Structural contributions of Zn in enhancing CO2 hydrogenation to methanol over ZnxZrOy catalysts

Probing into the Multifunctional Role of Copper Species and Reaction Pathway on Copper-Cerium-zirconium Catalysts for CO2 Hydrogenation to Methanol Using High Pressure in Situ DRIFTS

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

In Situ FTIR and Ex Situ XPS/HS-LEIS Study of Supported Cu/Al2O3 and Cu/ZnO Catalysts for CO2 Hydrogenation

Pressure Dependence and Mechanism of Mn Promotion of Silica-Supported Co Catalyst in the Fischer-Tropsch Reaction

Cu-supported ZnO in Conditions of CO2 Reduction to Methanol: Why 0.2 ML Coverage?

The relationship between structure and performance of Mo-ZrO2 catalysts in CO2 hydrogenation

Structure and Catalytic Performance of Alumina-Supported Copper–cobalt Catalysts for Carbon Monoxide Hydrogenation