Abstract:Objective: Markerless patient registration is a new procedure that may reduce logistical efforts and possibly also the radiation load on the patients prior to a computer-assisted intervention. Congruent surfaces, such as bone surfaces or skin surfaces, represented in a data set and in the surgical site, can be overlapped using surface-matching. Previous studies describing this kind of markerless registration, however, show inaccuracies of up to 10 mm during computer-assisted navigation. Furthermore, these systems use less than 1000 surface points of the soft tissue surface in order to establish a correlation between the patient and the data set. Previous papers did not answer the question whether it is this scanning resolution that induces these inaccuracies in registration or rather intraoperative skin deformations. Study design: In the present study therefore a new navigation system (SSN++) was used which is able to register up to 180,000 surface points of the surgical site. SSN++ is an infrared navigation system enlarged by a Minolta VI 900 3D volume digitizer. Three different kinds of laser scan-resolution were used for data correlation. An additional congruence analysis was performed in order to assess the geometry of the matched skin surfaces. 22 patients suffering from different cranial diseases (tumors, bony malformations, foreign bodies) were prepared for a computer-assisted intervention. Intraoral titanium-markers, rigidly fixed on the patients by a maxillary splint, were placed as targets while the CT data sets were made. These targets were - after markerless laser scan registration of the patients - supposed to serve for validating the new high-resolution navigation system SSN++. Results: The accuracy of markerless laser scan registration depends on the intraoperative laser scan's resolution. A high accuracy of the data correlation can be achieved if the number of the laser scan cloud points is about the same as the number of voxels of the corresponding surface on the CT data set. A reduction of the laser scan cloud points to less than 10 % compared to the number of voxels of the CT surface, however, leads to a significant loss of accuracy after markerless patient registration. Conclusion: The markerless laser scan registration of the surgical site may achieve the same accuracy as a patient registration made by rigidly fixed titanium screws (mean accuracy: 1.2 mm) as long as a high-resolution laser scan is being used.

Measurement uncertainty assessment of the scanning laser acoustic microscope and application to canine skin and wound

Structural health monitoring ultrasonic thickness measurement accuracy and reliability of various time-of-flight calculation methods

Integrating a Fundus Camera with High-Frequency Ultrasound for Precise Ocular Lesion Assessment

Atomic Force Microscopy Micro-Indentation Methods for Determining the Elastic Modulus of Murine Articular Cartilage

Laser and sound scanner for non-contact 3D volume measurement and surface texture analysis in wound healing

Establishing correction solutions for Scanning Laser Doppler Vibrometer measurements affected by sensor head vibration

On the Reliability of Suction Measurements for Skin Characterization

Acoustic attenuation coefficient measurement in extreme environments: Experimental characterization of uncertainty in multiple-reflection method

Observed and expected reliability of echocardiographic volumetric methods and critical change values for quantification of mitral regurgitant fraction in dogs

Attenuation Measuring Ultrasound Shearwave Elastography (AMUSE) as Noninvasive Imaging Biomarker for Liver Acute Cellular Rejection

Inspection of Multilayered Electronic Devices via Scanning Acoustic Microscopy Using Synthetic Aperture Focusing Technique

A Fast and Quantitative Measurement of Shear Wave Speed and Attenuation Using (cross) Modal Assurance Criterion for Acoustic Radiation Force Elasticity Imaging

A method to evaluate profilometric tooth wear measurements

Influence of implant reference on the scanning accuracy of complete arch implant scans captured by using a photogrammetry system

Measurement of Liquid and Solid Component Parameters in Canine Vocal Fold Lamina Propria.

Acoustic Measurements of Vitreous Membrane and Retina Thickness Reflectives

Uncertainty analysis of Altantic salmon fish scale's acoustic impedance using 30 MHz C-Scan measurements

Merging single-track location Elastographic imaging with the frequency shift method improves shear wave attenuation measurements

A Semi-Automated Method for Measuring Biofilm Accumulation on the Teeth Using Quantitative Light-Induced Fluorescence in Dogs and Cats

An Optimization Approach for Creating Application-specific Ultrasound Speckle Tracking Algorithms

High-resolution laser surface scanning for patient registration in cranial computer-assisted surgery