Abstract:Purpose This paper aims to clarify voltage sourced converter’s (VSC’s) influence rules on the alternating current (AC) short-circuit current and identify the key factors, so as to propose the short-circuit current suppression strategy. Design/methodology/approach This paper investigates the key factors which impact the short-circuit current supplied by the VSC based on the equivalent current source model. This study shows that the phase of the VSC equivalent current source is mainly affected by the type of fault, whereas the amplitude is mainly decided by the control mode, the amplitude limiter and the electrical distance. Based on the above influence mechanism, the dynamic limiter with short-circuit current limiting function is designed. The theoretical analysis is verified by simulations on PSCAD. Findings The short-circuit current feeding from VSC is closely related to the control mode and control parameters of the VSC, fault type at AC side and the electrical distance of the fault point. The proposed dynamic limiter can make VSC absorb more reactive power to suppress the short-circuit current. Research limitations/implications The dynamic limiter proposed in this paper is limited to suppress three-phase short-circuit fault current. The future work will focus more on improving and extending the dynamic limiter to the fault current suppression application in other fault scenarios. Practical implications The research results provide a reference for the design of protection system. Originality/value The key influence factors are conducive to put forward the measures to suppress the fault current, eliminate the risk of short-circuit current exceeding the standard and reduce the difficulty of protection design.

Analysis of the influence factors of VSC–HVDC on AC three-phase short-circuit current level

Current Saturation Analysis and Anti-Windup Control Design of Grid-Forming Voltage Source Converter

Power Coupling Analysis and Improved Decoupling Control for the VSC Connected to a Weak AC Grid

Current Saturation Analysis of Droop Controlled Voltage Source Converter

The Impact of PV converter on the grid strength of receiving AC system in MIDCS

Transient Modeling and Analysis of VSC Based DC Microgrid During Short Circuit Fault

DC side short-circuit fault analysis of VSC

Research on the Influence of Current Limiter Based on Highly Coupled Split Reactor on Main Circuit Breaker Overvoltage

Research on Overvoltage Suppression by Blocking Diode and DC Circuit Breaker in LCC-VSC Hybrid HVDC System.

Impedance Modeling and Analysis of Three-Phase Voltage-Source Converters Viewing from DC Side

The Principle and Method of Improving Short Circuit Ratio of LCC-HVDC by VSC-HVDC

Volt-VAR secure operational range assessment for preventing initial commutation failures of multi-infeed HVDCs

Overvoltage Suppression Under Commutation Failure Based on Improved Voltage-Dependent Current Order Limiter Control Strategy

Study of protection strategy for VSC based HVDC system

Research on Single-Phase Grounding Fault Protection on the AC Side of VSC-HVDC Systems Considering Third Harmonic Modulation

An Improved Control Strategy for VSC-HVDC Using VDCCOL

Research on circuit breaker failure protection and the secondary accelerated fault isolation scheme of VSC-HVDC grids

Analysis and suppression of LCC-HVDC inverter commutation failure caused by sending end faults

Influence Mechanism and Suppression Control of the MMC on Short-Circuit Current under AC Faults.

Principle and Method of Improving Short Circuit Ratio of LCC-HVDC Through VSC-HVDC

Influence of VSC Converter Station on Switching Overvoltage of LCC Converter Station in LCC-VSC Hybrid DC System