Abstract:OBJECTIVE This study aimed to develop a robotic system with autonomous functionality for holding and manipulating the endoscope in endoscopic endonasal surgery. A cost-effective prototype was created with the goal of using robotic assistance and achieving a more efficient learning curve for endoscopic surgery. METHODS A Stewart platform–based endoscope holder and positioner robotic system, developed by the Mechatronics Engineering Department of Kocaeli University, was used in conjunction with 3D Slicer and Plus Toolkit open-source health technology software. Following initial configuration on a 3D skull model, the system was applied to a fresh-frozen cadaver. RESULTS The robotic system and its registration process proved feasible, allowing the robot to autonomously reach predetermined anatomical points during the nasal step of the surgery. Compared with a previous study by the same authors, the surgery duration was successfully shortened. The experiment yielded positive outcomes in both the artificial skull model and the cadaver. The robotic system effectively performed the nasal stage of the surgery. The integration of a robotic surgical arm in the endoscopic endonasal approach holds the potential to enhance the learning curve through shared experiences. The robot offers assistance to surgeons during the learning phase of the endoscopic endonasal approach, aiding in the identification of anatomical landmarks through preoperative planning. CONCLUSIONS This system may present advantages such as improved visualization, enhanced maneuverability, and reduced user fatigue compared with conventional methods. These findings show the potential of robotic assistance in endoscopic surgical techniques. OBJECTIVE This study aimed to develop a robotic system with autonomous functionality for holding and manipulating the endoscope in endoscopic endonasal surgery. A cost-effective prototype was created with the goal of using robotic assistance and achieving a more efficient learning curve for endoscopic surgery. METHODS A Stewart platform–based endoscope holder and positioner robotic system, developed by the Mechatronics Engineering Department of Kocaeli University, was used in conjunction with 3D Slicer and Plus Toolkit open-source health technology software. Following initial configuration on a 3D skull model, the system was applied to a fresh-frozen cadaver. RESULTS The robotic system and its registration process proved feasible, allowing the robot to autonomously reach predetermined anatomical points during the nasal step of the surgery. Compared with a previous study by the same authors, the surgery duration was successfully shortened. The experiment yielded positive outcomes in both the artificial skull model and the cadaver. The robotic system effectively performed the nasal stage of the surgery. The integration of a robotic surgical arm in the endoscopic endonasal approach holds the potential to enhance the learning curve through shared experiences. The robot offers assistance to surgeons during the learning phase of the endoscopic endonasal approach, aiding in the identification of anatomical landmarks through preoperative planning. CONCLUSIONS This system may present advantages such as improved visualization, enhanced maneuverability, and reduced user fatigue compared with conventional methods. These findings show the potential of robotic assistance in endoscopic surgical techniques.

A third hand to the surgeon: the use of an endoscope holding arm in endonasal sinus surgery and well beyond

Innovative endoscopic sino-nasal and anterior skull base robotics

Endoscope Holders in Cranial Neurosurgery: Part I-Technology, Trends, and Implications

Hybrid Robotics for Endoscopic Transnasal Skull Base Surgery: Single-Centre Case Series

Handheld robotic device for endoscopic neurosurgery: system integration and pre-clinical evaluation

Assessment of the endoscopic range of motion for head and neck surgery using the SOLOASSIST endoscope holder

Utility of Nasal Access Guides in Endoscopic Endonasal Skull Base Surgery: Assessment of Use during Cadaveric Dissection and Workflow Analysis in Surgery

Setup and initial testing of an endoscope manipulator system for assistance in transoral endoscopic surgery

Robot-assisted endoscope guidance versus manual endoscope guidance in functional endonasal sinus surgery (FESS)

Robot-Assisted Surgery Around the Nose

A Handheld Robot for Endoscopic Endonasal Skull Base Surgery: Updated Preclinical Validation Study (IDEAL Stage 0)

Feasibility and Applicability of Portable Goose Neck System as a Third Arm for Holding Endoscope in Two Handed Endoscopic ENT Surgeries

First Use of a New Robotic Endoscope Guiding System in Endoscopic Orbital Decompression

A Novel Handheld Robotic System for Endoscopic Neurosurgery: A Cadaver Pilot Study

Foot-Controlled Robotic-Enabled Endoscope Holder for Endoscopic Sinus Surgery: A Cadaveric Feasibility Study

Paranasal Sinus Visualization Capabilities of a Novel Articulating Rigid-Flexible Endoscope: A Cadaveric Study

Stealth Autoguide as Robotic Holder for Cranial Endoscopic Surgery: Technical Note and Proof of Concept

Design and use of assistant robotic arm in endoscopic transnasal surgery

The Value of the Endoscope-Holding Arm in Transoral Pharyngeal Surgery

The AESOP robot system for video-assisted rigid endoscopic laryngosurgery

Computer-aided surgery of the paranasal sinuses and the anterior skull base@@@Computerassistierte Chirurgie der Nasennebenhöhlen und der vorderen Schädelbasis