Abstract:In this study, synthetic CaCO 3 materials were utilized as precursors for CaO-based CO 2 sorbents. The investigation examined how various operating parameters—such as synthesis temperature (ST), stirring rate (SR), and surfactant percentage (SP)—impact the properties of the adsorbents. Samples were firstly characterized by X-ray diffraction and Scanning Electron Microscopy (SEM), which revealed that the prevalence of calcite or aragonite crystal phases in the synthetic CaCO 3 precursors can be tuned by adequately choosing the dose of surfactant (Triton-X100®), so that it can be used as a crystal habit and growth modifier. The calcination process applied to the CaCO 3 precursors leads to the formation of partially sinterized cubic crystals of CaO, accompanied by minor quantities (< 5 %) of additional compounds like Ca(OH) 2 or CaSO 4 . Specific surface area (S BET ) and porosity were determined by measuring the N 2 adsorption isotherms. A CaCO 3 sample with an unprecedented value of S BET as large as 116 m 2 /g was prepared operating under optimal conditions. S BET and pore volumes were successfully correlated with the CO 2 uptake capacity of the samples. S BET is more influential for experiments carried out under diluted CO 2 atmosphere. When pure CO 2 is used, the influence of meso- and micropore volumes (V me and V mi ) is clearly predominant, which suggests that in this latter case diffusion through the porous texture of the samples plays a more remarkable role. A double-way approach through Response Surface Methodology (RSM) and the use of Artificial Neural Networks (ANNs) has been used to analyze the CO 2 uptake capacity of the samples. Within the operational interval, excellent results were obtained for pure and diluted CO 2 flow, and RSM and ANNs have demonstrated to be a very efficient tool to correlate the behavior of the CaO-based materials as CO 2 sorbents with the surface area and pore volumes of the samples. Valuable information on (i) the importance of the different factors under study; (ii) their influence on the surface and porosity of the CaO-derived sorbents; and (iii) the subsequent CO 2 capture performance of the sorbents has been obtained. The results suggest that four parameters have a statistically significant influence on CO 2 uptake. These parameters are SR, the square of SR, its interaction with SP, and the square of SP. Additionally, the study assessed the stability of the CaO-based sorbents over 11 consecutive calcination-carbonation cycles. By adequately choosing the synthesis strategy and conditions, an almost negligible shrinkage effect can be achieved, resulting in a more sustained uptake capacity throughout the cycles.

Assessment of CO2 adsorption capacity in Wollastonite using atomistic simulation

Performance of Nano-Caco3 Coated with SiO2 on CO2 Adsorption at High Temperature

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

The Effect of CaO Content on Sorption Performance of Nano CaO Based CO2 Adsorbent

Molecular dynamics of adsorption of hydroxide, sulfate and calcium ions at the interface between C-S-H and carbonate crystals

A periodic density functional theory study of adsorption of CO2 on anorthite (001) surface and effect of water

Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities

The Carbonation of Wollastonite: A Model Reaction to Test Natural and Biomimetic Catalysts for Enhanced CO2 Sequestration

The Conversion of Wollastonite to CaCO3 Considering Its Use for CCS Application as Cementitious Material

Molecular dynamics simulation of coupled water and ion adsorption in the nano-pores of a realistic calcium-silicate-hydrate gel

Molecular simulation of adsorption behaviors of methane and carbon dioxide on typical clay minerals

Modelling carbon dioxide adsorption behaviour on montmorillonite at supercritical temperatures

Effect of surface water on wollastonite carbonation: Activated dissolution and mass transfer

Molecular Dynamics Simulations of Carbon Dioxide Intercalation in Hydrated Na-Montmorillonite

CaSiO3 (001) surface reconstruction and CO2 molecular adsorption

CO adsorption on the calcite(10.4) surface: a combined experimental and theoretical study

Reaction Mechanism of Wollastonite In Situ Mineral Carbonation for CO2 Sequestration: Effects of Saline Conditions, Temperature, and Pressure

Mechanochemical formation of highly stable amorphous calcium carbonate in calcium silicates: Potential long-term storage of CO2 in cement

Exploring the role of surface and porosity in CO 2 capture by CaO-based adsorbents through response surface methodology (RSM) and artificial neural networks (ANN)

Direct observation and quantification of CO₂ binding within an amine-functionalized nanoporous solid

CO2/H2O adsorption and co-adsorption on functionalized and modified mesoporous silicas