Abstract:Introduction. Improving the technologies for isolating and purifying biologically active substances from plant materials is an important task for the pharmaceutical, food and cosmetic industries. Technology development often requires changes to the design of existing equipment. During the modernization of equipment for the implementation of new technologies, it is possible to improve its configuration, which makes it possible to significantly increase the yield of active substances at minimal cost. To increase the efficiency of the process of isolating hesperidin from plant materials, we proposed to use a number of technological solutions. In particular, it is proposed to use mixing devices with the configuration of impellers obtained by computational fluid dynamics, when using a Soxhlet extractor to use a heated extraction chamber, by adding an external coil jacket, which makes it possible to regulate the temperature inside the extraction chamber to accelerate the processes of diffusion and mass transfer, and to select the solvent and extractant on the basis of thermodynamic models by calculation. Aim. Improving the technology for isolating and purifying hesperidin from plant materials using modernized equipment. Materials and methods. Flow distribution in extraction apparatuses was modeled using computational fluid dynamics methods. To evaluate the results obtained on the basis of modeling, a number of experiments were carried out, the object of which was the peel of an orange (dried flavedo and albedo, grinding degree 0.1–0.2 mm, moisture content 3.5 %). The quantitative content of the flavonoid complex in terms of hesperidin was determined by direct spectrophotometry at a wavelength of 290 nm, the quantitative content of hesperidin was determined gravimetrically. Statistical data processing was performed using Minitab v21 software (Minitab Inc., USA), differences were considered statistically significant at p < 0.05. Results and discussion. Based on the methods of computational fluid dynamics, to intensify the processes of mixing and dissolution at the stages of preliminary degreasing of raw materials and extraction, a six-bladed impeller was designed, which makes it possible to accelerate these processes by creating axial and radial flows of fluid movement in a capacitive apparatus and maintaining raw materials in suspended state in the volume of liquid at low mixing speeds and energy consumption. Equipping the extraction chamber with a coiled jacket made it possible to significantly increase the solubility of the active substance and extract more of the target component in one extraction cycle. A technology for the isolation and purification of hesperidin was developed, and the parameters of the processes were determined and optimized. Conclusion. As a result of the study, it was shown that it is possible to intensify the processes of extraction and dissolution of active substances by selecting mixing devices using the method of computational fluid dynamics. To isolate poorly soluble compounds from dense raw materials (roots, bark, etc.), a modification of the Soxhlet apparatus with a heated extraction chamber was proposed. Modernization of typical technological units made it possible to obtain the substance of hesperidin with a yield of up to 95 % and a purity of up to 90 % with a single recrystallization.

Оbtaining isovaleric acid extraction from plant raw material

Valerenic acid and iridoid derivatives from the roots of Valeriana officinalis L.

THE OBTAINING RHODIOLA ROSEA L. BIOLOGICALLY ACTIVE COMPOUNDS BY BIOTECHNOLOGICAL METHODS (OVERVIEW)

REGRESSION ANALYSIS IN DEVELOPMENT OF PROCEDURE FOR ISOLATION AND QUANTITATIVE DETER-MINATION OF WATER-SOLUBLE POLYSACCHARIDES FROM DANDELION ROOTS OF MEDICINAL

Extraction of Low-Concentration Bio-Based Diols and Dicarboxylic Acids Using Ionic Liquid-Based Aqueous Two-Phase Systems: Experimental and Theoretical Studies

Experimental Investigation on Non‐toxic Solvents for Separation of Vanillic Acid

Studies on Reactive Extraction of Itaconic Acid from Fermentation Broths

Recovery of Fumaric Acid from Industrial Wastewater by Chemical Extraction and Stripping

Optimizing the extract yield of bioactive compounds in Valeriana officinalis root: a D-optimal design

Complex extraction and stripping of H acid wastewater

Improvement of Technologies for Isolation and Purification of Biologically Active Substances from Plant Raw Materials

Handshake of deep eutectic solvent and ionic liquid: Two liquid-liquid microextraction procedures for plant analysis

Extraction of Levulinic Acid from Aqueous Solution Using Trioctylamine at Different Temperatures

Estimation of extraction efficiency of salidroside from Rhodiola rosea using deep eutectic solvents

Efficient extraction of oleoresin from Ferula gummosa roots by natural deep eutectic solvent and its structure and chemical characterizations

Stability control of valerian ground material and extracts: a new HPLC-method for the routine quantification of valerenic acids and lignans

Extraction of rosmarinic acid from Perilla seeds using green protic ionic liquids

Liquid-Liquid Extraction of Formic Acid with 2-Methyltetrahydrofuran: Experiments, Process Modeling, and Economics

Extraction performance evaluation of amide-based deep eutectic solvents for carboxylic acid: Molecular dynamics simulations and a mini-pilot study

Reactive extraction for the separation of glyceric acid from aqueous solutions with 2-naphthaleneboronic acid and tri-octyl methyl ammonium chloride

(Selective) Isolation of acetic acid and lactic acid from heterogeneous fermentation of xylose and glucose