Abstract:The mechanism by which the explosive energy is transferred to the surrounding rock mass is changed in air-deck blasting. It allows the explosive energy to act repeatedly in pulses on the surrounding rock mass rather than instantly as in the case of concentrated charge blasting. The air-deck acts as a regulator, which first stores energy and then releases it in separate pulses. The release of explosion products in the air gap causes a decrease in the initial bore hole pressure and allows oscillations of shock waves in the air gap. The performance of an air-deck blast is basically derived from the expansion of gaseous products and subsequent multiple interactions between shock waves within an air column, shock waves and stemming base and shock waves and hole bottom. This phenomenon causes repeated loading on the surrounding rock mass by secondary shock fronts for a prolonged period. The length of air column and the rock mass structure are critical to the ultimate results. Several attempts have been made in the past to study the mechanism of air-deck blasting and to investigate its effects on blast performance but a clear understanding of the underlying mechanism and the physical processes to explain its actual effects is yet to emerge. In the absence of any theoretical basis, the air-deck blast designs are invariably carried out by the rules of thumb. The field trials of this technique in different blast environments have demonstrated its effectiveness in routine production blasting, pre-splitting and controlling over break and ground vibrations etc. The air-deck length appropriate to the different rock masses and applications need to be defined more explicitly. It generally ranges between 0.10 and 0.30 times the original charge length. Mid column air-deck is preferred over the top and bottom air-decks. Top air-deck is used especially in situations, which require adequate breakage in the stemming region. The influence of air-deck location within the hole on blast performance also requires further studies. This paper reviews the status of knowledge on the theory and practice of air-deck blasting in mines and surface excavations and brings out the areas for further investigation in this technique of blasting.

Study on the effect of air deck on ground vibration and development of blast damage zone using 3D discrete element numerical method

Effects of Axial Air Deck on Blast-Induced Ground Vibration

Influence of Depth and Position of Vibration-Isolating Slot on Damping Effect of Blasting Vibration

Blasting-induced rock damage control in a soft broken roadway excavation using an air deck at the blasthole bottom

Numerical Simulation of Dynamic Damage and Stability of a Bedding Rock Slope under Blasting Load

Reduction of blast-induced vibration in the direction of tunneling using an air-deck at the bottom of a blasthole

Numerical analysis of parameters influencing blast damage and vibration using 3D distinct element method in the Calamine mine

Air-Decking Technique in Bench Blasting

Theory and Practice of Air-Deck Blasting in Mines and Surface Excavations: A Review

Punching Mechanism of Air-Deck Stemming for Drilling Blasting and Its Influence on Rock Fragmentation

The use of air decks in production blasting in an open pit coal mine

A Study on Parameters Influencing Blast-Induced Frequency Content and Dominant Frequency Attenuation

Reduction of Blasting Induced Ground Vibrations Using High-Precision Digital Electronic Detonators

Research on the Vibration Response of High-Rise Buildings under Blasting Load

Study on Distribution Characteristics of Damage Range along Smooth Blasting Hole Based on PPV

Blast performance of RC columns with different levels of concrete grades and reinforcing ratios

Effects of Charge Length on Single Long-Hole Blasting Vibration Characteristics with Consideration of the Free Surface

NUMERICAL SIMULATION STUDY ON SURFACE MASS POINT VERTICAL VIBRATION VELOCITY IN PIPE JACKING BLASTING

Rock fracture mechanism of air-deck charge blasting considering the action effect of blasting gas

Damage Analysis of Concrete Structure under Multidirectional Shaped Charge Blasting Using Model Experiment and Ultrasonic Testing