Abstract:A different to conventional monitoring systems sensor equipped tools give the possibility to gain information about the process status directly from the contact zone between tool and component to be machined. For example this can be realized by the integration of small temperature sensors into grinding wheels. The transmitting of the process data is performed by a telemetric unit attached to the grinding wheel's core. In this paper, the development of a new thin film thermocouple sensor concept is described. The unique feature of this sensor is the continuous contacting of the thermocouple through the grinding process inherent wear which leads to smearing of the thermoelectric layers and thus forming the measuring junction of a thermocouple. The system was used in OD grinding processes aiming to detect grinding burn and process instabilities. By reducing the volume of the sensors a fast response and high time resolution can be obtained. By this way, observance of the key parameters of the practical operation as closely as possible to the cutting area is enabled and so observance of process efficiency and tool status independent from workpiece machining conditions can be realized. All sensors used are thermocouples of type K, a combination of Chromel (NiCr) and Alumel (NiAlMnSi) material. The maximum temperature to be measured by this sensor is about 1350 °C, which ensures the applicability in the grinding process. Telemetry components to amplify and send the thermovoltage signals are adjusted to this type of thermocouple. The ability of the set‐up to detect thermal influences was demonstrated in grinding processes with a continuously increasing specific material removal rate. The approach serves to measure temperatures between fast sliding surfaces in harsh environments (fluids, high pressure, heat), similar to the grinding process. Therefore their application is not limited to tools but also applicable for other rotating components such as bearings, gears and shafts in powertrains. A new thin film thermocouple sensor concept, usable for grinding tool integration, is described in this paper. The unique feature of this sensor is the continuous contacting of the thermocouple through the grinding process inherent wear which leads to smearing of the thermoelectric layers and thus forming the measuring junction of a thermocouple.

Intelligente Überwachung von Werkzeugverschleiß/Intelligent monitoring of tool wear based on machine internal data

Tool wear monitoring in roughing and finishing processes based on machine internal data

Monitoring of Tool and Component Wear for Self-Adaptive Digital Twins: A Multi-Stage Approach through Anomaly Detection and Wear Cycle Analysis

Towards a systematical approach for wear detection in sheet metal forming using machine learning

Simple machine learning allied with data-driven methods for monitoring tool wear in machining processes

Machine Learning Approaches for Monitoring of Tool Wear during Grey Cast-Iron Turning

An industrial tool wear monitoring system for interrupted turning

Tool wear intelligent monitoring techniques in cutting: a review

WEAR MONITORING IN TURNING OPERATIONS USING VIBRATION AND STRAIN MEASUREMENTS

Study of Tool Wear Monitoring Using Machine Vision

Sensor-based intelligent tool online monitoring technology: Applications and progress

An online monitoring method of milling cutter wear condition driven by digital twin

Monitoring of Machining Processes Using Sensor Equipped Tools

Tool Wear Monitoring in Micro-Milling Based on Digital Twin Technology with an Extended Kalman Filter

Artificial intelligence systems for tool condition monitoring in machining: analysis and critical review

Tool wear condition monitoring based on wavelet transform and improved extreme learning machine

Tool wear monitoring—an intelligent approach

Tool Wear Monitoring in Milling Based on Fine-Grained Image Classification of Machined Surface Images

A Novel Method for Tool Identification and Wear Condition Assessment Based on Multi-Sensor Data

A Novel Computer Vision Based Machine Learning Approach For Online Tool Wear Monitoring In Machining

Advances In Research On Tool Wear Online Monitoring Method