Abstract:This paper presents an experimental study of the effect of the mass of dust retained on a fibrous filter bed operating singly and in a "cyclone-filter-bed" system on changes in filtration efficiency and accuracy, as well as the increase in flow resistance. The research was carried out using a novel and unprecedented method, determining the dust absorption coefficient km of the filter baffle under laboratory conditions. A filtration system built of a single cyclone and a cylindrical filter cartridge with an appropriately sized surface set behind it was studied. Conditions corresponding to the actual operating conditions of the air filter were maintained: dust concentration, filtration speed and dust extraction from the cyclone settling tank. The purpose of the research was to evaluate filter materials with different structures in terms of filtration efficiency and accuracy, as well as flow resistance. The study showed that the parameters of the structure of filter materials—permeability, grammage and thickness—affect the process of retaining dust particles. It was shown that the increase in the flow resistance of the filter bed has a higher intensity when dust grains of small sizes are directed at it, which is the case when the bed is operated behind a cyclone, which separates larger dust grains from the air. There is a reduction in the operating time of the filtration system due to the limitation of the permissible resistance ∆pfdop, and the corresponding dust absorption km has a lower value. For a fixed value of the flow resistance, the dust absorption coefficient km2 of three different filtration baffles AC, B2, and B, working with a cyclone, take values 50–100% smaller than when working in a single-stage system. It has been shown that the "cyclone-filter baffle" unit, due to its greater dust separation capability, allows the filter cartridge to operate for a longer time until a certain flow resistance is reached. This allows the unit to operate longer at lower flow resistance without changing the filter cartridge, thus saving energy. The km values obtained during the tests, using the proposed original method, allow the selection of the filter bed for specific vehicle operating conditions by modelling its course.

A method developed for calculating the fuel filter pressure drop caused by carbon-containing sediments in a liquid hydrocarbon fuel

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Numerical Investigation of Performance and Multiparameter Prediction Model of High-Pressure Fuel Filters and Cavitation at Filtration Orifices Considering Variable Fluid Properties

Numerical Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Consideration of Fuel Pyrolysis and Surface Coking at Supercritical Pressures

Large Eddy Simulations of Heat Transfer and Thermal Oxidative Coking of Aviation Kerosene in Vertical U-Tube at a Supercritical Pressure

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Kinetic Modeling of Surface Deposition for Air-Saturated and Oxygen-Free Aviation Fuels

Validation and analyses of RANS CFD models for turbulent heat transfer of hydrocarbon fuels at supercritical pressures

POSSIBLE MEASURES TO EXTEND THE SERVICE LIFE OF DIESEL FUEL PUMP MAIN COMPONENTS

Kinetic Modeling of Thermal Oxidation and Coking Deposition in Aviation Fuel

Experimental Study of the Effect of Air Filter Pressure Drop on Internal Combustion Engine Performance

Experimental and Numerical Study on Oxidation Deposition Properties of Aviation Kerosene

Experimental Testing of Filter Materials for Two-Stage Inlet Air Systems of Internal Combustion Engines

Mathematical modeling of the process of functioning of objects and technical means of ensuring airfield control

Experimental Investigation into the Effects of Fuel Dilution on the Change in Chemical Properties of Lubricating Oil Used in Fuel Injection Pump of Pielstick PA4 V185 Marine Diesel Engine

Pressure Drop Dynamics during Filtration of Mixture Aerosol Containing Water, Oil, and Soot Particles on Nonwoven Filters

Heat Transfer and Cracking Performance of Endothermic Hydrocarbon Fuel when It Cools a High Temperature Channel

Convective Heat Transfer and Pressure Drop Characteristics of Near-Critical-pressure Hydrocarbon Fuel in a Minichannel

Methodology for Formulating Aviation Kerosene Surrogate Fuels and The Surrogate Fuel Model for HEF Kerosene

The Study about a Flow Meter with Online Filling Function of Jet Fuel Additive

The pressure drop of fibrous surface filters for gas Filtration: Modeling and experimental studies