Salt Spray Resistance of Roller-Compacted Concrete with Surface Coatings
Huigui Zhang,Wuman Zhang,Yanfei Meng
DOI: https://doi.org/10.3390/ma16227134
IF: 3.4
2023-11-12
Materials
Abstract:In order to evaluate the feasibility of surface coatings in improving the performance of RCC under salt spray conditions, sodium silicate (SS), isooctyl triethoxy silane (IOTS), and polyurea (PUA) were used as surface coatings to prepare four types of roller-compacted concrete (RCC): reference RCC, RCC-SS, RCC-IOTS, and RCC-PUA. A 5% sodium sulfate solution was used to simulate a corrosive marine environment with high temperatures, high humidity, and high concentrations of salt spray. This study focuses on investigating various properties, including water absorption, abrasion loss, compressive strength, dynamic elastic modulus, and impact resistance. Compared to the reference RCC, the 24 h water absorption of RCC-SS, RCC-IOTS, and RCC-PUA without salt spray exposure decreased by 22.8%, 77.2%, and 89.8%, respectively. After 300 cycles of salt spray, the abrasion loss of RCC-SS, RCC-IOTS, and RCC-PUA reduced by 0.3%, 4.4%, and 34.3%, respectively. Additionally, their compressive strengths increased by 3.8%, 0.89%, and 0.22%, and the total absorbed energy at fracture increased by 64.8%, 53.2%, and 50.1%, respectively. The results of the study may provide a reference for the selection of coating materials under conditions similar to those in this study.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering