Abstract:Thermochemical conversion of biomass has been studied extensively over the last decades. For the design, optimization and modeling of thermochemical conversion processes, such as fixed bed pyrolysis, a sound understanding of pyrolysis is essential. However, the decomposition mechanism of most biomass types into gaseous, liquid, and solid fractions is still unknown because of the complexity of pyrolysis and differences in biomass composition.The aim of this study was to find characteristic differences in the pyrolysis behavior of three widely used biomass feedstocks to optimize the performance of industrial fixed bed pyrolysis. This aim was achieved in three steps. First, devolatilization kinetics during pyrolysis of three biomass types was investigated in a thermogravimetric analyzer (TGA). Then, a one-step multi-component pyrolysis model with three independent parallel reactions for hemicellulose, cellulose and lignin was derived to correlate the kinetics with single component decomposition and to identify their amount in the biomass sample. In a final step, the findings were tested in a fixed bed reactor at laboratory scale to prove applicability in industrial processes.Three types of biomass were chosen for this investigation: wheat straw, rape straw and spruce wood with bark. They represent biomass with a high cellulose, hemicellulose and lignin content, respectively. Since lignin is the most stable and complex of these three biomass components, its amount is assumed to be the main controlling factor in the thermochemical decomposition process.The thermogravimetric (TG) curve of spruce wood with bark was found to shift to about 20K higher temperatures compared to the TG curves of straw and rape straw. This result indicates that a higher activation energy is needed to decompose woody biomass, which contains a higher amount and a different type of lignin than straw. Three wood decomposition phases were distinguished from the negative first derivatives curves (DTG): a shoulder during hemicellulose decomposition, a peak during cellulose decomposition and a smaller rise during lignin decomposition. By comparison both herbaceous biomass types decomposed in only two phases at lower temperatures. The decomposition of the herbaceous, and woody biomass samples was completed at about 830K and 900K, respectively, leaving only a solid residue of ash. The derived pyrolysis model estimated the composition and described the devolatilization curves of each biomass with sufficient accuracy for industrial processes, although the same activation energy set, taken from the literature, was used for each biomass. In the fixed bed pyrolysis experiments similar characteristics were found to those in the TGA experiments. Herbaceous biomass with a higher cellulose and hemicellulose content decomposed faster and produced a larger fraction of gaseous products than woody biomass with a higher lignin content. According to the assessment of the product distribution, performed after each experiment, woody biomass pyrolysis led to a larger fraction of solid products than herbaceous biomass pyrolysis. We conclude that industrial fixed bed pyrolysis can be optimized for different biomass feedstocks with a specific composition of cellulose, hemicellulose and lignin.

Pyrolysis behaviors, kinetics, and byproducts of enzymatic hydrolysis residues for lignocellulosic biorefining

Pyrolysis Product Evolution Characteristics of Bio-Ferment Residue Using Thermogravimetric Analysis, Fourier Transform Infrared Spectroscopy, and Mass Spectrometry

Characterisation of the products from pyrolysis of residues after acid hydrolysis of Miscanthus

Unveiling the pyrolysis mechanisms of cellulose: Experimental and theoretical studies

Influences of the Reaction Temperature and Catalysts on the Pyrolysis Product Distribution of Lignocellulosic Biomass (Aspen Wood and Rice Husk)

Pyrolysis Properties Of Potential Biomass Fuels In Southwestern China

Pyrolysis behavior and kinetics of grape pruning residues: Insights from multistep reaction models and Py-GC/MS

Recalcitrant organic residue compositions and the resource recovery from a food waste treatment facility

Comparative study on pyrolysis and catalytic pyrolysis upgrading of biomass model compounds: thermochemical behaviors, kinetics, and aromatic hydrocarbon formation

Analytical pyrolysis (Py–GC/MS) of corn stover, bean pod, sugarcane bagasse, and pineapple crown leaves for biorefining

Influence of the Interaction of Components on the Pyrolysis Behavior of Biomass

Sustainable Recycling of Residues from the Food Waste (FW) Composting Plant Via Pyrolysis: Thermal Characterization and Kinetic Studies

Cellulose, hemicellulose and lignin slow steam pyrolysis: Thermal decomposition of biomass components mixtures

The effect of the biomass components lignin, cellulose and hemicellulose on TGA and fixed bed pyrolysis

Pyrolysis and acid hydrolysis of lignocellulosic biomass as a tool for monosaccharide obtaining

Torrefaction, pyrolysis and two-stage thermodegradation of hemicellulose, cellulose and lignin

Valorization of Enzymatic Hydrolysis Residues from Corncob into Lignin-Containing Cellulose Nanofibrils and Lignin Nanoparticles

Investigation on the thermal degradation behavior of enzymatic hydrolysis lignin with or without steam explosion treatment characterized by TG-FTIR and Py-GC/MS

Energy Efficiency of Lignocellulosic Biomass Pyrolysis in Two Types of Reactors: Electrical and with Primary Forest Biomass Fuel

(Co-) pyrolysis/steam gasification of Chinese herb residues and anthracitic coal: interaction effects, kinetic parameters, and products evaluation

Physicochemical, thermodynamic, and kinetic controls on volatile products, bio-oils, and biochars of Lycium barbarum pyrolysis and their multi-objective optimization