Abstract:The use of batteries in modern electronic devices and electric cars is becoming increasingly important. Batteries with high energy density, high rate and cycle capability, as well as operational safety, are in high demand today. The cathode of a lithium-ion battery is a part that significantly affects the performance of the battery. LiNiMnCoO2 (NMC) cathode, especially in the composition of LiNi0.8Mn0.1Co0.1O2 (NMC811), has high specific capacity but not high thermal and electrical conductivity stability. To improve the temperature stability and performance of the battery, conductive elements such as graphene can be added. The addition of graphene can increase battery performance due to its high electrical conductivity characteristics. In this study, the addition of graphene on NMC cathode through a simple solid-state technique along with direct mixing was shown to improve the cathode characteristics. The addition of graphene on the NMC cathode also proved to be capable of improving the cycle stability and rate capability. The retention capacity is 95.83 %, higher than that of the cathode without graphene modification, which is 92.27 % after 100 cycles with 1C current, and comparable to the capability of commercial batteries. The ability to work under rapid charge and discharge conditions was also well demonstrated with a capacity drop of 5.44 % over 200 cycles at a charge and discharge current of 5C. The addition of graphene was also shown to improve the safe use of NMC batteries. With the test at 5C current, the highest temperature of the battery was 46.52 °C, which is still considered safe for the operation of lithium ion-based batteries at high currents. In this research, the use of a simple solid-state method to mix the graphene with NMC811 cathode is proven to be able to produce lithium-ion batteries with superior performance. This offers ease in terms for use in large-scale production of cathode preparation that can produce high-performance cathodes.

Effects of Graphene Addition on Negative Active Material and Lead Acid Battery performances under Partial State of Charge Condition

Influence of additives of carbon nanotubes and graphene to the active mass of the negative electrode of the lead-acid battery on its electrochemical characteristics

Higher Capacity Utilization and Rate Performance of Lead Acid Battery Electrodes Using Graphene Additives

Nanostructured Nb2O5 Cathode for High-Performance Lithium-Ion Battery with Super-P and Graphene Compound Conductive Agents

Improving Performance And Cyclability Of Zinc-Silver Oxide Batteries By Using Graphene As A Two Dimensional Conductive Additive

N-doped reduced graphene oxide loading nano lead oxide as negative additive for enhanced properties of lead-carbon batteries

A Layered-Carbon/pbso4 Composite As a New Additive for Negative Active Material of Lead-Acid Batteries

Synthesis of Nafion-reduced graphene oxide/polyaniline as novel positive electrode additives for high performance lead-acid batteries

Influences of carbon additives in the positive active material of lead-acid batteries to improve capacity and life cycles

Nitrogen-doped redox graphene as a negative electrode additive for lead-acid batteries

Chemically Functionalized Graphene for High Performance Lithium/Sulfur Batteries

High power and thermal-stable of graphene modified LiNi0.8Mn0.1Co0.1O2 cathode by simple method for fast charging-enable lithium ion battery

Effect of Nitrogen Dopant Agents in the Performance of Graphene-Based Cathodes for Li-S Batteries

Achieving high performances of lead-carbon battery with MnO 2 positive additive

Acid-treated multi-walled carbon nanotubes as additives for negative active materials to improve high-rate-partial-state-of-charge cycle-life of lead-acid batteries

Achieving High Performances of Lead-Carbon Battery with MnO2 Positive Additive

Effect of particle size, surface area and conductivity of nano-carbon additives on deep discharge lead-acid battery

Preparation of NH4Cl-Modified Carbon Materials via High-Temperature Calcination and Their Application in the Negative Electrode of Lead-Carbon Batteries

Advancing Lithium Battery Performance through Porous Conductive Polyaniline-Modified Graphene Composites Additive

Effect of Graphene on the Performance of Silicon–Carbon Composite Anode Materials for Lithium-Ion Batteries

Novel Polymer-Graphite Composite Grid As a Negative Current Collector for Lead-Acid Batteries