Abstract:Controlled source audio-magnetotelluric (CSAMT) is an indirect and effective geophysical prospecting method in subsurface prospecting. Although CSAMT investigation tools are equipped with new techniques, it must be noted that the models obtained still do not automatically decipher the reality of groundwater in bedrock with very high resistivity contrasts. Our study proposed a new CSAMT data processing scheme, which combined the 2D modeling and 3D visualization for groundwater exploration in Tongkeng area, Hunan Province, China. To directly highlight exploitable groundwater, we used the open-source and the OCCAM2D inversion software, coupled with the geological information of the area to define the 3D imaging with emphasizing on the network of producing fractures. We deployed three CSAMT profiles with transverse magnetic (TM) mode recorded on 21 frequencies (8192 Hz to 8 Hz). The data were filtered, pre-processed and carefully analyzed from station to station. Analysis of the apparent resistivity and phase maps show the conductive zones (<150 Ωm) and resistive zones (> 500 Ωm) separated by transition zones (150 to 500 Ωm). The 2D models and stacked sections show discontinuities of fractures marked by two major faults and a main fracture in the zone interconnected by minor fractures. A 3D geological map was obtained from the result of the best models of the different lines. The ITER2DAT function was used to export the data from OCCAM2D inversion and then display it to array and depth channels data for each station. Geological and borehole ZK01 data were used to build pseudo stratigraphic drillholes based on the range of very low (<10 Ωm) to high values resistivity structures (>1500 Ωm). The 3D view shows stratigraphic discontinuity that is between carbonaceous formation and the metamorphic granites. The intruded Devonian limestone layer, which is the potential water tank, and the carbonate vein layer are constantly heated by the geothermal gradient of the area.

Geothermal exploration using numerical simulation and a comprehensive electromagnetic method

Geothermal Resource Exploration in Magmatic Rock Areas Using a Comprehensive Geophysical Method

Geophysical Exploration for Geothermal Resources:An Application of MT and CSAMT in Jiangxia,Wuhan,China

A Study on Modeling a Deep Sand Geothermal Field in South China

The Applications of WFEM in the Exploration of Medium-Depth Geothermal Resources

A Study on Magnetotelluric Characteristics of Magmatic Geothermal Systems

Two-dimensional Inversion of CSAMT Data and Three-Dimensional Geological Mapping for Groundwater Exploration in Tongkeng Area, Hunan Province, China

Application of Infrared Remote Sensing and Magnetotelluric Technology in Geothermal Resource Exploration: A Case Study of the Wuerhe Area, Xinjiang

3D Inversion of Multifrequency Controlled-Source Electromagnetic Data and Its Application to Geothermal Exploration in the Tianzhen Region of the Northern Datong Basin, China

Application of TEM to hydrogeologic survey in Baiqi area of Inner Mongolia

Inversion of the Temperature and Depth of Geothermal Reservoirs Using Controlled Source Audio Frequency Magnetotellurics and Hydrogeochemical Method

Exploring multiple electrical layers overlying coal seams using the transient electromagnetic method

Grounded source transient electromagnetic 3D forward modeling with the spectral-element method and its application in hydraulic fracturing monitoring

3-D Joint Inversion of MT and CSEM Data for Imaging a High-Temperature Geothermal System in Yanggao Region, Shanxi Province, China

Numerical simulation of water-bearing coal goaf using ground-borehole TEM—a case study of Tongxin Coal Mine, Shanxi Provice, China

Geothermal Resource Exploration in Reshi Town by Integrated Geophysical Methods

The Processing Workflow of Semi-Airborne Transient Electromagnetic Data Using Geological Modeling and Three-Dimensional Numerical Simulation – A Case History in Yunnan, China

Remote Sensing and GIS Based Geothermal Exploration in Southwest Tengchong, China

The Application of Electromagnetic Sounding Method to Deep Iron Ore Exploration:A Case Study of the Wuyang Iron Mining Area of Henan

An integrated approach to analyze the formation models of geothermal resources in complicated areas with low exploration: A case study of the Midu County in Yunnan Province, China

Applications of the Passive Super Low Frequency (SLF) Electromagnetic Technique to Exploration of Geothermal Energy Sources