Abstract:Abandoned roadways of coal mines are suitable for compressed air energy storage after proper treatment with grouting reinforcement and concrete lining. According to the theoretical analysis, the rock mass and concrete lining will experience cyclic tensile stress in the air injection-withdrawal process which is unfavorable to the long-term stability of the roadway. At present, few researches have focused on mechanical properties of rock under cyclic tensile stress. Therefore, cyclic tests were conducted for sandstones under different maximum tensile stresses and different cyclic frequencies, respectively. The test results showed that there was little damage in the sandstone until the maximum tensile stress was over the threshold which was about 75% of the average tensile strength of the sandstone. Besides, the rock was damaged more easily under lower cyclic frequency. Based on the testing results, a viscoelastic-plastic model for sandstone was constructed under cyclic tensile stress. The model parameters were fitted by optimization analysis method and used to predict mechanical behaviors of the sandstone. The results showed that the response of the rock could be well obtained by the proposed model.Article highlightsLower cyclic frequency of tensile stress makes sandstone sample more favorable to be broken.The sample tested under low cyclic frequency of tensile stress will generate time-depending tensile strain inside.The time-depending tensile strain evolution properties of the sample under different testing conditions can be uncovered by a model constructed by different basic mechanical elements and a self-defined element.

Experimental investigation and viscoelastic-plastic model for sandstone under cyclic tensile stress