Abstract:Soft compliant gripping is essential in delicate surgical manipulation for minimizing the risk of tissue grip damage caused by high stress concentrations at the point of contact. It can be achieved by complementing traditional rigid grippers with soft robotic pneumatic gripper devices. This manuscript describes a rod-based approach that combined both 3D-printing and a modified soft lithography technique to fabricate the soft pneumatic gripper. In brief, the pneumatic featureless mold with chamber component is 3D-printed and the rods were used to create the pneumatic channels that connect to the chamber. This protocol eliminates the risk of channels occluding during the sealing process and the need for external air source or related control circuit. The soft gripper consists of a chamber filled with air, and one or more gripper arms with a pneumatic channel in each arm connected to the chamber. The pneumatic channel is positioned close to the outer wall to create different stiffness in the gripper arm. Upon compression of the chamber which generates pressure on the pneumatic channel, the gripper arm will bend inward to form a close grip posture because the outer wall area is more compliant. The soft gripper can be inserted into a 3D-printed handling tool with two different control modes for chamber compression: manual gripper mode with a movable piston, and robotic gripper mode with a linear actuator. The double-arm gripper with two actuatable arms was able to pick up objects of sizes up to 2 mm and yet generate lower compressive forces as compared to elastomer-coated and non-coated rigid grippers. The feasibility of having other designs, such as single-arm or hook gripper, was also demonstrated, which further highlighted the customizability of the soft gripper device, and it's potential to be used in delicate surgical manipulation to reduce the risk of tissue grip damage.

Adaptive Self‐Sealing Suction‐Based Soft Robotic Gripper

Suction-based Soft Robotic Gripping of Rough and Irregular Parts

A Multimodal, Enveloping Soft Gripper: Shape Conformation, Bioinspired Adhesion, and Expansion-Driven Suction

A Bioinspired Gripper with Sequential Motion and Mutable Posture Enabled by Antagonistic Mechanism

Self-folding thermo-magnetically responsive soft microgrippers.

Soft yet secure: Exploring membrane buckling for achieving a versatile grasp with a rotation-driven squeezing gripper

A versatile and high-load soft gripper enabled by vacuum-assisted bio-inspired interfacial adhesion

Octopus-Inspired Adaptable Soft Grippers Based on 4D Printing: Numerical Modeling, Inverse Design, and Experimental Validation

A Spherical Self-Adaptive Gripper With Shrinking Of An Elastic Membrane

Rod-based Fabrication of Customizable Soft Robotic Pneumatic Gripper Devices for Delicate Tissue Manipulation

A Soft Gripper with Programmable Effective Length, Tactile and Curvature Sensory Feedback

Enhancing versatility and adaptability in soft robotics: Design and analysis of an adaptive gripping port

Lightweight and Powerful Vacuum-Driven Gripper with Bioinspired Elastic Spine

Soft octopus-inspired suction cups using dielectric elastomer actuators with sensing capabilities

Hybrid Soft Electrostatic Metamaterial Gripper for Multi-surface, Multi-object Adaptation

A self-loading suction cup driven by a resonant dielectric elastomer actuator

Bioinspired design and validation of a soft robotic end-effector with integrated SMA-driven suction capabilities

The "Pac-Man'' Gripper: Tactile Sensing and Grasping through Thin-Shell Buckling

GSG: A Granary-Shaped Soft Gripper With Mechanical Sensing via Snap-Through Structure

ROSE: Rotation-based Squeezing Robotic Gripper toward Universal Handling of Objects

A soft gripper driven by conical dielectric elastomer actuator to achieve displacement amplification and compliant grips