Abstract:The hybrid electrochemical treatment for persistent organometallic complexes [Cu–ethylenediaminetetraacetic acid (EDTA)] that was a combination of the reduction recovery of the center metal as nanoparticles and the oxidative decomposition of the organic ligand was attempted using the potential cycling at the oxygen-terminated boron-doped diamond (BDD) electrode. In the step of the recovery of the center metal of the organo-metal complex in the potential cycling from the reduction potential for Cu2+ , by stepping up the anodic potential limit to the potential region for oxygen evolution reaction, the reionization of electrodeposited Cu could be suppressed in the presence of the dissolved oxygen. Moreover, separation of the electrodeposited Cu as nanoparticles from the electrode surface could be achieved by introducing the oxygen-containing functional groups on the diamond surface. The oxidation of the particle surface by the dissolved oxygen might induce the formation of the insulating layer and accelerate the separation by the electrostatic repulsive force between the oxygen-terminated surface and the insulating layer on the Cu particles. The reaction pathway of the Cu–EDTA treatment was analyzed using the long-term potential cycling at the potential region between the reduction potential of Cu and the oxidation potential of the EDTA. In flow injection analysis with the UV detector, the formation of the Cu particles by the reduction reaction of the Cu2+ ion from Cu–EDTA was clarified to mainly occur in the initial stage of the electrolysis. Moreover, in high-performance liquid chromatography analysis with the electrogenerated chemiluminescence detector for the treated solution, ethylenediaminetriacetic acid (ED3A) and ethylenediaminediacetic acid (EDDA) were observed. Therefore, it was confirmed that the liberated EDTA was oxidized to ED3A and EDDA through sequential removal of the acetate groups. An unidentified product (supposed to be the small size of a hydrocarbon) appeared after 100h during the electrolysis. Although the concentration of this unidentified product was not decreased in the electrolysis with anodic potential limit of 2.3V , the concentration decay for this product was observed for the potential cycling up to 3.0V , suggesting that for the full oxidation of EDTA to CO2 , it might be effective for the electrochemical oxidation by the OH radical available over 2.6V at BDD.

Hybrid Electrochemical Treatment for Persistent Metal Complex at Conductive Diamond Electrodes and Clarification of Its Reaction Route

Electrochemical decomplexing and oxidation of organic (chelating) additives in effluents from surface treatment and metal finishing

Electrochemical treatment of wastewaters containing metal-organic complexes: A one-step approach for efficient metal complex decomposition and selective metal recovery

Effective removal of the heavy metal-organic complex Cu-EDTA from water by catalytic persulfate oxidation: Performance and mechanisms

Simultaneous Cu(II)-EDTA decomplexation and Cu(II) recovery using integrated contact-electro-catalysis and capacitive deionization from electroplating wastewater

Photoelectrocatalytic Oxidation of Cu(II)-EDTA at the TiO2 Electrode and Simultaneous Recovery of Cu(II) by Electrodeposition.

Enhanced ozonation of Cu(II)-organic complexes and simultaneous recovery of aqueous Cu(II) by cathodic reduction

Decomplexation of Ni-EDTA enhanced by Fe(III) reduction in the Fenton reaction: Insight into the role of carbonyl groups

Advanced oxidation processes coupled with electrocoagulation for the exhaustive abatement of Cr-EDTA

Anoxic iron electrocoagulation automatically modulates dissolved oxygen and pH for fast reductive decomplexation and precipitation of Cu(II)-EDTA: The critical role of dissolved Fe(II)

Self-catalytic Fenton-like reactions stimulated synergistic Cu-EDTA decomplexation and Cu recovery by glow plasma electrolysis

Decomposition of Nickel(Ⅱ)-Ethylenediaminetetraacetic acid by Fenton-Like reaction over oxygen vacancies-based Cu-Doped Fe3O4@γ-Al2O3 catalyst: A synergy of oxidation and adsorption

Decomplexation of Cu(II)-EDTA by UV/persulfate and UV/H2O2: Efficiency and Mechanism

Decomplexation of Cu(II)-EDTA by Synergistic Activation of Persulfate with Alkali and CuO: Kinetics and Activation Mechanism.

Treatment of Ni-EDTA containing wastewater by electrochemical degradation using Ti<SUP>3+</SUP> self-doped TiO<sub>2</sub> nanotube arrays anode

Multiprocess catalyzed Cu-EDTA decomplexation by non-thermal plasma coupled with Fe/C microelectrolysis: Reaction process and mechanisms

Electrochemical Removal of Metal-Organic Complexes in Metal Plating Wastewater: A Comparative Study of Cu-EDTA and Ni-EDTA Removal Mechanisms.

Coupled Cu(II)-EDTA Degradation and Cu(II) Removal from Acidic Wastewater by Ozonation: Performance, Products and Pathways

Electro-oxidation of Ni (II)-citrate complexes at BDD electrode and simultaneous recovery of metallic nickel by electrodeposition

Heterogeneous Fenton-like Degradation of EDTA in an Aqueous Solution with Enhanced COD Removal under Neutral Ph.

Targeted Decomplexation of Metal Complexes for Efficient Metal Recovery by Ozone/Percarbonate.