Conversaziones, 1973

DOI: https://doi.org/10.1098/rsnr.1974.0011

1974-04-30

Notes and Records of the Royal Society of London

Abstract:Conversaziones were held this year on 10 May and 28 June. At the first conversazione twenty-six exhibits and a film were shown. Two exhibits were arranged by the Central Electricity Research Laboratories, Leatherhead. The effect on very large boilers of very small traces of impurities was demonstrated by Mr G. M. W. Mann, Dr K. Torrance and Professor J. M. Ward. Modern power station boilers are enormous structures— they cost £10m each, contain 300 miles of metal tubing and have combustion chambers large enough to house 100 double-decker buses. For their trouble-free operation demineralized water has to be used; this is so pure that commonly occurring substances such as iron, copper, sodium and chloride are present only to the extent of a few parts per 1000 million. If the levels of impurities are not carefully controlled, corrosion of the boiler tubes can occur and one faulty tube will put the whole boiler out of action at a cost of £30 000 per day. Recent advances in potentiometry have led to the use of selective ion electrodes for the on-steam monitoring of water quality and these electrodes were demonstrated to show their sensitivity. In addition mechanisms of corrosion were illustrated and typical examples of corrosion displayed. Mr H. K. Beale, Mr C. F. Price and Mr C. N. Reed arranged an exhibit on compression terminations for aluminium conductors. Although aluminium conductors for the electrical power industry are being increasingly used for power cables because of cheapness and lightness compared with copper, they have the disadvantage of being difficult to terminate. This is due to the electrically insulating layer of oxide on the conductor surface, and the creep characteristics of the metal. As a result, terminating aluminium cables by means of the standard technique of lugs compressed on the end of the conductor poses problems not encountered with copper. An outline was given of research now in progress to overcome these problems. A working display of a prototype cartridge-operated tool illustrated the developments that are taking place in compression jointing equipment for speedy field use. A new CERL measuring set for the diagnostic testing of joints in service was demonstrated.