Abstract:Addressing the escalating threat of environmental pollution and ecological risks resulting from the discharge of organic pollutants into aquatic environments demands immediate and comprehensive solutions. In this context, leveraging agricultural waste to produce activated carbon appears to be an intriguing approach to resolving this pressing environmental problem. This study employed doum fiber ( Chamaerops humilis ) as an alternative precursor for producing low-cost and mesoporous activated carbon (ACDF) with a high surface area (630.92 m 2 /g) through a pyrolysis method involving chemical activation with H 3 PO 4 . The adsorption characteristics of ACDF were investigated for removing phenolic pollutants: Bisphenol A (BPA) and α-Naphthol (ANP). The optimal activation conditions were determined using response surface methodology with full factorial design (RSM-FFD), considering four variable factors: Activation temperature (200–600 °C), Activation time (30–180 min), Concentration of H 3 PO 4 (1–10 mol/L), and Impregnation Ratio (0.5–2 g/mL). The results indicated that the best activation conditions were an activation temperature of 600 °C, an activation time of 43.46 min, an H 3 PO 4 concentration of 8 mol/L, and an impregnation ratio of 0.5. The adsorption equilibrium data from kinetics and isotherm analyses demonstrated that the adsorption of BPA and ANP onto ACDF is appropriately described by the pseudo-second-order and Langmuir models. The maximum adsorption capacity of ACDF was 56.11 mg/g for BPA and 69.97 mg/g for ANP. Thermodynamic parameters indicated that the reactions of both pollutants on the ACDF surface were spontaneous, favorable, and exothermic. Moreover, ACDF displayed a higher affinity and stability over five successive cycles for ANP compared to BPA, owing to its reactivity as confirmed by Density Functional Theory (DFT). The interaction mechanism between the adsorbate and the ACDF surface involved main interactions such as electrostatic interaction, hydrogen bonding, and π-π interactions. The results demonstrate that the optimized ACDF is a cost-effective and readily available option for removing phenolic pollutants from industrial wastewater.

Conversion of citrus industrial processing solid residues to well-developed mesoporous powder-activated carbon and its some water pollutant removal performance

Optimization of Cr (VI) removal from aqueous solution with activated carbon derived from Eichhornia crassipes under response surface methodology

Synthesis and optimization of activated carbon from Doum ( Chamaerops humilis ) fiber via pyrolysis-assisted H 3 PO 4 activation for removal of bisphenol A and α-Naphthol

Optimized preparation of activated carbon with high porosities based on puck shells (Afrostyrax lepidophyllus) by response surface methodology and physico-chemical characterization

The effect of impregnation ratio and surface modification on the characteristics and performance of activated carbon derived from Ficus carica leaves for Cr(VI) removal

Adsorption performance and kinetics of Cr(VI) onto activated carbons derived from the waste leaves of invasive plants Rhus typhina and Amorpha fruticosa

Comparison of surface adsorption efficacies of eco-sustainable agro/animal biomass-derived activated carbon for the removal of rhodamine B and hexavalent chromium

High surface area microporous activated carbon from Pisum sativum peels for hexavalent chromium removal from aquatic environment

Mixed fruit Citrullus lanatus and Citrus sinensis wastes for mesoporous activated carbon via microwave assisted H3PO4 activation: Optimization for methylene blue dye removal

Microporous Activated Carbon from Pisum sativum Pods Using Various Activation Methods and Tested for Adsorption of Acid Orange 7 Dye from Water

Phosphoric Acid Activated Carbon from Melia azedarach Waste Sawdust for Adsorptive Removal of Reactive Orange 16: Equilibrium Modelling and Thermodynamic Analysis

Highly surface activated carbon to remove Cr(VI) from aqueous solution with adsorbent recycling

Effective removal of cationic dye on activated carbon made from cactus fruit peels: a combined experimental and theoretical study

Activated carbon-decorated electrospun polystyrene fibers for highly efficient removal of hazardous crystal violet dye from water

Improved Method for Producing Catalytic Carbon and the Potential for Increasing Its Use in Commercial Applications

Preparation and characterization of activated carbons from Lemon Pulp for oxytetracycline removal

Advancing cobalt ferrite-supported activated carbon from orange peels for real pulp and paper mill wastewater treatment

Synthesis and characterizations of conocarpus- and azadirachta-derived activated carbons as wastewater recycling material

High flux Fe/activated carbon membranes for efficient degradation of organic pollutants in water by activating sodium persulfate

Preparation, characterization and adsorption performance of mesoporous activated carbon with acidic groups

Insights into the adsorption mechanism of chlorpyrifos on activated carbon derived from prickly pear seeds waste: An experimental and DFT modeling study