Abstract:The most common filters used to determine the angular position of quadrotors are the Kalman filter and the complementary filter. The problem of angular position estimation consist is a result of the absence of direct data. The most common sensors on board UAVs are micro electro mechanical system (MEMS) type sensors. The data acquired from the sensors are processed using digital filters. In the literature, the results of research conducted on the effectiveness of Kalman and complementary filters are known. A significant problem in evaluating the performance of the studied filters was the lack of an arbitrarily determined UAV position. The authors of this paper undertook the task of determining the best filter for a real object. The main objective of this research was to improve the stability of the physical quadrotor. For this purpose, we developed a research method using a laboratory station for testing quadrotor drones. Moreover, using the MATLAB environment, they determined the optimal parameters for the real filter applied using the PX4 software, which is new and has not been considered before in the available scientific literature. It should be mentioned that the authors of this work focused on the analysis of filters most commonly used for flight stabilization, without modifying the structure of these filters. By not modifying the filter structure, it is possible to optimize the existing flight controllers. The main contribution of this study lies in finding the most optimal filter, among those available in flight controllers, for angular position estimation. The special emphasis of our work was to develop a procedure for selecting the filter coefficients for a real object. The algorithm was designed so that other researchers could use it, provided they collected arbitrary data for their objects. Selected results of the research are presented in graphical form. The proposed procedure for improving the embedded filter can be used by other researchers on their subjects.

Increasing the accuracy of the automatic control system of unmanned aircraft under conditions of non-stationary interference

Filter-based Adaptive Backstepping Attitude Control for Multi-Rotor UAVs with Parametric Uncertainty, External Disturbance and Input Saturation

Filter-Based Disturbance Observer and Adaptive Control for Euler–Lagrange Systems with Application to a Quadrotor UAV

Computer simulation of control contour of unmanned aviation complex to provide robustness and controllability

Design of Anti-interference System for Fully Autonomous UAV Based on ADRC- EKF Algorithm

An Algorithm Fusing State Estimation and TDOA Filtering for UAV Tracking Enhancement

Application of Filters to Improve Flight Stability of Rotary Unmanned Aerial Objects

The Influence of Temporal Disturbances in EKF Calculations on the Achieved Parameters of Flight Control and Stabilization of UAVs

High-Precision Control of Aviation Photoelectric-Stabilized Platform Using Extended State Observer-Based Kalman Filter

A Fuzzy Strong Tracking Extended Kalman Filter for UAV Navigation Considering Interruption of GPS Signal

An Improved Target Tracking Algorithm Based on Extended Kalman Filter for UAV

Stochastic Control of UAVs: An Optimal Tradeoff between Performance, Flight Smoothness and Control Effort

A Novel Method for Vertical Acceleration Noise Suppression of a Thrust-Vectored VTOL UAV

Dynamic Based Estimator for UAVs with Real-time Identification Using DNN and the Modified Relay Feedback Test

Monitoring the State of the Operator of the Ergatic System in UAV Control Tasks

A fuzzy adaptive complementary filter for attitude estimation based on norm judgment

Nonlinear Extended Kalman Filter for Attitude Estimation of the Fixed-Wing UAV

An Integrated Adaptive Kalman Filter for High-Speed UAVs

An improved FastEuler-DLKF small-UAV AHRS algorithm

Research on UAV flight attitude control system based on simulink and genetic algorithm

Tracking Unmanned Aerial Vehicles Based on the Kalman Filter Considering Uncertainty and Error Aware