Abstract:Efficient and safe cleanup for the high-viscosity heavy oil spill has been a worldwide challenge due to its sluggish flowability, while classic absorption methods by electric/solar heating are seriously limited by low efficiency and high fire hazards during heating of highly flammable oil. Facing this dilemma, we reported a novel flame-retardant photothermal conversion nanocoating to endow commercial foams with highly efficient and safe heavy oil cleanup absorption. This multifunctional nanocoating consisting of nano-Fe3O4 and reduced graphene oxide (rGO) that both showed photothermal conversion ability and non-flammable nature can be firmly deposited on the polymer foam skeletons via facile coprecipitation and dip-coating processes. The composite foam showed a tough morphology with high hydrophobicity and low density, thus leading to selective high absorption for various oils and organic solvents. Due to the double photothermal conversion effects of nano-Fe3O4 and rGO, the temperature of the foam can be rapidly heated at a rate of ∼103.5 °C/min (the fastest rate ever) under 1 sun irradiation. Consequently, the foam with a high absorption capacity of 75.1 times its weight demonstrated a rapid absorption rate of 9000 g m–2 min–1 for large-viscosity oil under 1 sun irradiation, which was 3 times faster than previously reported. Furthermore, benefitting from high flame retardancy, elasticity, and magnetism, the foam can be safely and repeatedly used for magnetically controllable oil cleanup absorption, which effectively avoids oil spill hazards.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22596?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22596</a>.Fe element mapping for the Fe3O4/MF and rGO/Fe3O4/MF foams; pore-size distributions of the MF, Fe3O4/MF, and rGO/Fe3O4/MF foams calculated by the mercury intrusion method; deformation recovery and strength recovery at different compressing–releasing cyclic processes for the MF and Fe3O4/MF foams; digital photographs of the recovery process for n-hexane and dichloromethane (dyed with Sudan III) absorbed in the rGO/Fe3O4/MF foam by compression; reflectance and transmission spectra for the rGO/Fe3O4/MF foam; schematic illustration of the solar steam generation experimental setup and solar vapor generator floating on ethanol in a beaker wrapped with thermal insulation materials; absorption process of the rGO/Fe3O4/MF foam for dichloromethane (dyed with Sudan III), water contact angle values of the rGO/Fe3O4/MF foam, and absorption capacities of the rGO/Fe3O4/MF foam for various oils and organic solvents; digital photographs of the removal process of n-hexane (dyed with Sudan III) floating on water and dichloromethane (dyed with Sudan III) sinking in water using the rGO/Fe3O4/MF foam; continuous solar-assisted vacuum absorption equipment of the rGO/Fe3O4/MF foam and time-lapse photography illustrating the continuous oil absorption process; TG and DTG curves of different foams in the air atmosphere; basic properties of heavy crude oil; porous characteristics, strength recovery, deformation recovery, saturation magnetization (MS), electrical conductivity, and data from microcalorimetry tests; comparison of MF-based oil absorbents in the recent literature; and material cost for the rGO/Fe3O4/MF foam production (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22596/suppl_file/am0c22596_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Multifunctional magnetic C3N4-rGO adsorbent with high hydrophobicity and simulated solar light-driven photocatalytic activity for oil spill removal

Preparation of Magnetic G-C3n4/fe3o4 Composite and Its Application in the Separation of Catechol from Water

Facile synthesis of magnetically separable Fe3O4/GO/g-C3N4 composite for superior photocatalytic degradation of naphthalene

Multifunctional Photothermal Conversion Nanocoatings Toward Highly Efficient and Safe High-Viscosity Oil Cleanup Absorption

Heterojunction of N/B/RGO and g-C3N4 anchored magnetic ZnFe2O4@ZnO for promoting UV/Vis-induced photo-catalysis and in vitro toxicity studies

Novel Fe2TiO5/reduced graphene oxide heterojunction photocatalyst with improved adsorption capacity and visible light photoactivity: experimental and DFT approach

Adsorption and Catalytic Oxidation of Pharmaceuticals by Nitrogen-Doped Reduced Graphene Oxide/fe3o4 Nanocomposite

Preparation And Adsorption Of 2-Nitro-1,3-Benzenediol Of Fe3o4/Go/Ppy Composite

Magnetic TiO2@Fe3O4/reduced graphene oxide nanocomposites with enhanced photocatalytic activities

Magnetite Reduced Graphene Oxide/Ordered Mesoporous Carbon Nanocomposite as Effective Adsorbent for Removal of 2-Naphthol in Wastewater

Surface modified mesoporous g-C3N4@FeNi3 as prompt and proficient magnetic adsorbent for crude oil recovery

Construction of ZnFe2O4/rGO Composites As Selective Magnetically Recyclable Photocatalysts under Visible Light Irradiation

Enhanced Photocatalytic Performance of N-rGO/g-C3N4 Nanocomposites for efficient Solar-Driven Water Remediation

Fabrication of magnetic Fe3O4@SiO2@Bi2O2CO3/rGO composite for enhancing its photocatalytic performance for organic dyes and recyclability

Mesoporous CuS nanospheres decorated rGO aerogel for high photocatalytic activity towards Cr(VI) and organic pollutants

Reduced graphene oxide wrapped ZnFe2O4 nanospheres as selective magnetically recyclable Photocatalysts under visible light irradiation

Co-doped magnetic N-TiO2-x/rGO heterojunction@cellulose nanofibrous flakelet for enhanced photocatalytic oxidation and facile separation: Efficient charge separation and self-floatability

High-efficient adsorption for versatile adsorbates by elastic reduced graphene oxide/Fe 3 O 4 magnetic aerogels mediated by carbon nanotubes

Multifunctional 3D GO/g-C3N4/TiO2 foam for oil-water separation and dye adsorption

Co3O4-rGO—Synthesis, Characterization, and Evaluation of Photocatalytic Activities

Enhanced photodegradation of organic dyes using plasma-modified magnetic CuAl 2 O 4 /rGO nanocomposite under simulated sunlight irradiation