Abstract:Journal of Composite Materials, Ahead of Print. This study investigates the impact response of thermoplastic composite materials. The material system under consideration is a carbon fiber reinforced low melt semi-crystalline resin TC1225 LMPAEK reinforced with T700 G (T700/LMPAEK). Several High Energy Dynamic Impact (HEDI) tests were performed wherein an aluminum projectile impacted T700/LMPAEK panels at different velocities. In the impact experiment studied herein, the projectile impacted the T700/LMPAEK panel at 73.8 m/s and rebounded. The ensuing damage to the T700/LMPAEK panel was characterized via ultrasonic C-scans, which enabled visualizing delamination extent and through-thickness matrix cracks as the boundaries between delaminations at individual interfaces. Since the projectile rebounded after impact in the current test, the fiber damage mode, while present, was not as significant as in the case of tests wherein the projectile perforated the panel. The impact event was modeled using a combined continuum damage mechanics and cohesive zone analysis approach with the commercially available hydrocode LS-DYNA®. The dynamic deformation and damage of the continuum, that is, the plies in the T700/LMPAEK laminate, were modeled using a Deformation Gradient Decomposition (DGD) material model, that is, MAT299 available within LS-DYNA. The interlaminar regions were treated as zero-thickness cohesive zones, wherein the dynamic delamination mechanics were modeled using a traction-separation formulation. Mixed-mode delamination growth was captured using the Benzegaggh-Kenane (B-K) traction-separation interpolation law. Strain-rate sensitivity of interlaminar fracture toughness was included using approximations based on published literature. The outcomes of the modeling effort demonstrate good correlations with test data regarding panel deflection, panel-projectile interactions, damage modes and damage extent.

Residual Strength Assessment of Low Velocity Impact Damage of Graphite-Epoxy Laminates

Impact responses and residual flexural properties of narrow CFRP laminates

Post-Damage Compressive Strength of Woven Hybrid Composites Impacted with Various Energy Levels

Comparative Evaluation of Impact Performance of Laminate Composites Containing Impact Induced/Mechanically Inserted Defects

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Bridging the Effect of the Impactor Head Shape to the Induced Damage during Impact at Low Velocity for Composite Laminates

Damage Estimation in Carbon Fibre Reinforced Epoxy and Its Influence on Residual Properties.

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Impact response of thermoplastic composites – Experiments and modeling

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Failure Analysis of Carbon Fiber Reinforced Composite Subjected to Low Velocity Impact and Compression after Impact

Low-Velocity Impact Behaviour of Titanium-Based Carbon-Fibre/Epoxy Laminate

Failures of laminates under nonpenetrative impacts

Experimental and numerical behaviors of GFRP laminates under low velocity impact

Research on the Damage Assessment of Carbon/Epoxy Composite Laminates at Different Impact Energy

Low-velocity Impact-Induced Damage of Continuous Fiber-Reinforced Composite Laminates . Part I . an FEM Numerical Model

Research on low‐velocity impact resistance of carbon fiber composite laminates

LOW-VELOCITY IMPACT RESPONSE OF COMPOSITE LAMINATE AND ITS RELATIONSHIP WITH DAMAGE PARAMETERS

Experiments and Finite Element Simulations of Composite Laminates Following Low Velocity On-Edge Impact Damage

Bridging the Low-Velocity Impact Energy Versus Impact Damage and Residual Compression Strength for Composite Laminates

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates