Abstract:The visualized cavitation experimental apparatus is designed and constructed. The cavitation evolution process is recorded by high‐speed photography. The evaporation and condensation coefficients are modified based on experiments. The cavitation damage region is predicted by the gas‐phase condensation rate.For the phenomenon of widespread and serious cavitation damage in the throttling section of pressure reducing valve under high temperature and high pressure in the chemical technology process of petroleum and coal, according to actual coordination structure widely applied between the valve core and valve seat, the cavitation throttling section with symmetrical contraction and expansion was made, and the visualized cavitation water tunnel experimental apparatus was designed and constructed. The cavitation evolution process with time under different cavitation numbers σ was recorded by the high‐speed photography, the variation law of cavitation damage length and area with time was investigated by using aluminum film as cavitation damage carrier. Based on the experimental cavitation characteristic length L*, the evaporation coefficient Fv, and condensation coefficient Fc in the Zwart–Gerber–Belamri cavitation numerical model were modified, and the cavitation damage region was predicted by the gas phase condensation rate of numerical simulation. The results show that with the decrease of cavitation number, the characteristic length of cavitation strip increases; the cavitation characteristic length fluctuates greatly at σ = 1.22, and there are cavitation cloud periodic formation, shedding, collapse, and disappearance at the tail of the cavitation strip on the upper valve seat; the cavitation damage length of the upper and lower valve seat remains unchanged with time, and the cavitation damage area increases approximately linearly with time; the initial position and length of cavitation damage predicted by the gas phase condensation rate are basically consistent with the experimental results, which verifies the accuracy of the modified numerical simulation.

Failure Mechanism and Optimization of Throttle Valve Based on Computational Fluid Dynamics

The CFD Analysis of Cavitation Erosion and Structural Optimization for an Unloading Valve

Parametric Study of Throttling Window Shapes on Flow Force Characteristics in Main Feed Water Regulating Valve

Experimental Study on Cavitation Resistive Property of Water Hydraulic Throttle Orifices

Fluid Dynamics Analysis and Optimized Throttling Design of L-shaped Multi-Stage High Pressure Reducing Valve

Simulation and Structure Optimization of WC–Co Cemented Carbide Cage-Sleeve Type Throttle Valve Core Erosion

Three-dimensional numerical investigation of solid particle erosion in gate valves

Effects of Throttling Windows on Cavitation Flow of Sleeve Control Valve

Review of Downhole Throttle Failure in Oil and Gas Wells

Numerical Simulation on Erosion of Pneumatic Drain Valve and optimization on structure

Structure Optimization of Conical Spool and Flow Force Compensation in a Diverged Flow Cartridge Proportional Valve

Numerical and Experimental Investigation on Opening Direction Steady Axial Flow Force Compensation of Converged Flow Cartridge Proportional Valve

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Study on the Erosion of Choke Valves in High-Pressure, High-Temperature Gas Wells

Numerical Simulation and Structure Improvement of Double Throttling in A High Parameter Pressure Reducing Valve

Throttling Components Effect on Aerodynamic Performance of Superheated Steam Flow in Multi-Stage High Pressure Reducing Valve

Experiment and numerical simulation investigation on cavitation evolution and damage in the throttling section of pressure reducing valve

Effects of Throttling Orifice Plate on Flow and Aerodynamic Noise Characteristics Inside Valve Downstream

Theoretical investigation on the throttle pressure reducing valve through CFD simulation and validating experiments

Optimization on the Topological Coupling-Throttling Structures for Directional Valves