Abstract:Present work concerns the interaction of chemistry and turbulence in a turbulent reacting flow. Both self-ignition and flame propagation are studied. For self-ignition study, the combined effects of temperature/concentration inhomogeneities and turbulence were studied numerically. For this purpose two statistic turbulent combustion models, namely Linear Eddy Model (LEM) and Reference Scalar Field (RSF), were applied for simulations of statistically homogeneous reacting media. because these two models allow the calculation of the averaged reaction rates in fluctuating media from the first principles. Self-ignition delays, species concentration and temperature evolutions were computed for three kinds of initial conditions, where temperature pdfs were given as Dirac's 8 peak pdf, rectangular and bimodal shapes. The results obtained from the two models mentioned above were compared. The effect of heat loss on ignition delay was also studied with the RSF model. For the study of turbulent flame propagation, RSF model was applied to the problem of I-D flame propagation in a spherical fan-stirred bomb. This problem is selected because of its simplest possible flow field, hence reduced computation cost and easy implementation. For turbulent convection different conditionally averaged velocity models were introduced and evaluated. Pressure during gas explosion, and averaged mean values such as temperature and species concentration were calculated. The evolution of temperature pdf was also obtained from statistics of the reference scalar field. Flame radii and turbulent mass burning rates were determined from the calculated pressure rise and the mass burning rates were compared with two existing correlations of Bradley et al. and Zimont as well as with measurements. Two types of reactive mixtures were studied, one was the methane/air flame and the other one was DTBPIN2 decomposition flame. Experiments with both mixtures were carried out in a spherical fan-stirred bomb. In particular, pressure trace during explosion was recorded and this provided reference data for the modelling studies. Methane/air combustion was simulated with a reduced two-step chemical kinetics mechanism instead of the single-step kinetics commonly used for turbulent reacting flows modelling. The two-step kinetics employed was developed according to the experimental observations of two-stage oxidation of hydrocarbons, in which the first stage is related to the consumption of the fuel and the second stage represents the oxidation of CO and H2• Firstly, the kinetics was calibrated in the laminar situations to produce a reasonable agreement with measured flame speed. Then the kinetics was used with turbulent models to simulate the turbulent explosions. While DTBPIN2 decomposition flame is described by a single step kinetics and the reaction constants have been well-studied. So for simulation ofDTBPIN2 flame, any ambiguity resulting in uncertainties in chemical mechanism is avoided.

Overall Kinetic Parameters and Laminar Burning Velocity from Pressure Measurements in Closed Vessels

Assessing an Experimental Approach for Chemical Explosive Mode and Heat Release Rate Using DNS Data

The Laminar Burning Velocities of Stoichiometric Methane–Air Mixture from Closed Vessels Measurements

A Comparison Between Direct Numerical Simulation and Experiment of the Turbulent Burning Velocity-Related Statistics in a Turbulent Methane-Air Premixed Jet Flame at High Karlovitz Number

Experimental and numerical investigations of the laminar burning velocities of premixed fuel-rich methane oxy-fuel and oxygen-enhanced flames

Numerical investigation of high-pressure combustion in rocket engines using Flamelet/Progress-variable models

Statistical Description of Turbulent Reacting Media

Chain Mechanisms in the Overall Reaction Orders in Laminar Flame Propagation

Inert Gas Influence on Propagation Velocity of Methane-air Laminar Flames

An experimental and computational study of the burning rates of ultra-lean to moderately-rich H2/O2/N2 laminar flames with pressure variations

Temperature and pressure influence on explosion pressures of closed vessel propane-air deflagrations

High-pressure Laminar Flame Speeds and Kinetic Modeling of Carbon Monoxide/hydrogen Combustion

Experimental system of constant volume combustion bomb and measurement of C7 fuels flame speeds

A Compilation of Experimental Data on Laminar Burning Velocities

Experimental and numerical study of the effect of elevated pressure on laminar burning velocity of lean H2/CO/O2/diluents flames

Explosion pressures of hydrocarbon-air mixtures in closed vessels

Outward Propagation, Burning Velocities, and Chemical Effects of Methane Flames Up to 60 ATM

The Pressure Dependence of Laminar Flame Speed of 2-Methyl-2-butene/air Flames in the 0.1–1.0 MPa Range

Turbulent Accelerating Combusting Flows with Methane-Vitiated Air Flamelet Model

Laminar flame speeds and kinetic modeling of H2/O2/diluent mixtures at sub atmospheric and elevated pressures

Laminar Burning Velocities of Hydrogen-Blended Methane–Air and Natural Gas–Air Mixtures, Calculated from the Early Stage of p(t) Records in a Spherical Vessel