Toughening of epoxy resin with balanced performance by in situ constructing interfacial bonding and elastic segments into epoxy network
Yunchuan Zeng,Qianqian Wang,Pengwu Xu,Weijun Yang,Martin Hoch,Piming Ma
DOI: https://doi.org/10.1016/j.matchemphys.2021.125529
IF: 4.778
2022-02-01
Materials Chemistry and Physics
Abstract:Solid rubber-toughened epoxy resin (EP) has important theoretical and application value. However, the compatibility between solid rubber and EP is usually poor, leading to severe phase separation and consequently poor toughening effect. In this work, ethylene-glycidyl methacrylate-vinyl acetate solid rubber (EGVA) was functionalized with carboxyl groups (EGVA-COOH) and amino groups (EGVA-NH2), which was confirmed by 1H NMR, and used as reactive tougheners for EP systems. All functionalized EGVA rubbers can react with EP molecules to form the EGVA-g-EP, resulting in better compatibility between the EP matrix and the EGVA. Furthermore, the functionalized EGVA can react with EP matrix to incorporate into the final EP network to form a co-network, which greatly improve the compatibility between the EP matrix and EGVA. As a consequence, the EGVA particle size was reduced by a factor of 71.4%, and the impact toughness of EP resin with 5 phr EGVA-NH2 was increased by 130% without sacrificing the tensile strength and heat resistance. Theoretical analysis indicated that critical stress intensity factor (K Ic ) and critical strain energy release rate (G Ic ) of EP were 158% and 341% higher than that of neat EP, respectively. Therefore, this work provided a novel route for producing EP-based thermosets with balanced strength and toughness by in situ constructing interfacial bonding and elastic segments into epoxy network, which could broaden the application range of solid rubber in the field of epoxy toughening.
materials science, multidisciplinary