Abstract:Summary Scale represents a risk to the profitability of projects in the oil exploration and production industry. The occurrence of the phenomenon has the potential to cause severe damage to producer and injector wells, subsea lines, and surface systems, commonly requiring the cleaning and replacement of these elements and resulting in lost profit because of reduced production efficiency, need for unscheduled maintenance stoppages, and, in the most serious cases, permanent losses of wells, lines, and equipment. The problem becomes even more severe in projects that use the injection of reactive fluids into the reservoir, as is the case with carbon dioxide-water alternating gas (CO2-WAG) injection. To avoid such an occurrence, scale inhibitors are used, which are continuously dosed at various points in the production flow, from subsea chemical injection mandrel, commonly positioned at the ends of the production columns, wet Christmas tree valves, and at various positions in the plant process on the surface. However, the regions upstream of the chemical injection mandrels, such as the perforations zone and the reservoir itself, are normally not protected by continuous-dosing inhibitors and are therefore critical for the occurrence of the phenomenon. These critical points require removal operations when the accumulation of scale is significant to economically justify a treatment. To prevent the recurrence of scale in the short term, the cleaning operation is commonly associated with the squeeze of inhibitors into the porous medium. The effect of this inhibition, however, is temporary, as the inhibitor adhered to the rock is released with the water production, until it ceases to be effective after a determined accumulated production of this fluid, requiring the evaluation of a new application of the product. This work proposes a workflow for optimizing cleaning treatments associated with scale inhibitor injection, as well as CO2-WAG fluid exchanges, aimed at protecting the reservoir and well producer perforations, and seeking to optimize the project’s net present value (NPV) in operations carried out by means of rigs or remotely by the stationary production unit (SPU). To this end, a study was carried out by coupling producer scale and inhibition proxies to a flow simulation with a reactive transport model, representative of some fields of the Brazilian pre-salt. The method developed, in addition to providing greater robustness to the predicted production curve by considering the occurrence of scale in the producer perforations, can identify optimal time windows for the treatment, even if they are in periods where the inhibition is no longer effective. The results obtained in the study for a single producing well indicate a substantial gain in the NPV with the use of the proposed methodology, around 13 million USD in relation to the proposal of treatments always carried out in a preventive way. The application also indicated that it is more advantageous to carry out remote operations through the SPU, even with lower cleaning efficiency when compared with rig treatments, with a gain of about 12 million USD.

Well integrity assessment under uncertainty considerations and evaluation of the workover frequency impact

Incorporation of frailties into a non-proportional hazard regression model and its diagnostics for reliability modeling of downhole safety valves

Assessing the Groundwater Contamination Potential from a Well in a Hydraulic Fracturing Operation

Examples of well integrity risk assessment and associated mitigation for producing wells

Well Integrity Evaluation and Management: Development and Application of Real Time Online System in High Temperature and High Pressure Gas Wells, Tarim Oilfield

Research Status and Development Prospect of Wellbore Integrity in China

Numerical Investigation of Fracture Compressibility and Uncertainty on Water-Loss and Production Performance in Tight Oil Reservoirs

Analysis of Wellbore Integrity System

Uncertainty and Sensitivity Analysis in Reservoir Modeling: a Monte Carlo Simulation Approach

Assessment of wellbore integrity failure risk and hazardous zones in depleted reservoirs underground gas storage during the operation processes

Reliability-Based Preventive Maintenance Strategy for Subsea Control System

Assessment of reasonability of production wells transfer to well workover stage

Generating Value from Mature Gas Fields by Quantifying Well Integrity Assurance with a Critical Analysis of Multiple Logs & Retrieved Tubular Surface Inspection

Prediction Analysis of Downhole Tubing Leakage Location for Offshore Gas Production Wells

Construction and application of workover priority evaluation model for surface coalbed methane low production wells based on Entropy-TOPSIS

An Integrated Approach for Well Design Optimization with MPD and its Impact on Value

Geological Uncertainty and Effects of Depositional Sequence on Improved Oil Recovery Processes

Timeliness Analysis of Coalbed Methane Workover for Reducing Damage to Coal Reservoirs

Well Production Optimization under the Scale Effect and CO2-WAG Injection in a Carbonate Model of the Brazilian Pre-Salt

Analysis of depleted gas reservoir underground gas storage wellbore integrity change during gas injection and production processes

Integrity control analysis of natural gas hydrate production wellbore using system method and game theory