Abstract:Promising electromotive rolling stock is based on application of asynchronous traction engines with a short-circuited rotor. The use of asynchronous traction motor controller allows: increase power, tractive force and speed of electromotive rolling stock, promote reliability and bring down the cost of life cycle, increase lifetime. In addition to this asynchronous traction motor controller of double power gives an opportunity to provide train traffic through the areas of direct current with a voltage of 3 kV as well as on the areas of alternating current with voltage of 25 kV at a frequency of 50 Hz without replacement of electromotive rolling stock. In the article the mathematical model of asynchronous traction engine is considered taking into account electric and mechanical part of traction motor controller. A model describes electromagnetic processes in stator windings in the fixed α, β, γ coordinate system, which has its axis combined with the axis of stator phases A, B, C. Processes in a shortcircuited rotor are described in the rotating a, b, c coordinate system. For the modeling of mechanical part of motor controller basic equation of dynamics, that characterizes ratio between an electromagnetic torque and section modulus in the shaft of the electric motor, is used. In a proposed model simulation and structural modeling methods were implemented by means of function modules of the Simulink library. A model allows to investigate transition processes given: nonsinusoidal and asymmetric supply voltage; saturation of the magnetic system; current crowding out effect in the rotor conductors; presences of shortings between the turns of the stator winding and damages of rotor rods. A mathematical model is implemented as matrix Simulink model of asynchronous engine in MatLab. Credibility of the mathematical model was checked up while conducting virtual researches of electromechanics characteristics of asynchronous engine of type AD914.The outcome confirmed the adequacy of the implemented model and the possibility of the implemented model to be used in other applications.

DYNAMIC PROCESSES IN THE DRIVE SYSTEM OF ELECTRIC TRACTION VEHICLES

Dynamic Analysis of Support System of Permanent Magnet Traction Motors for High-Speed Trains

Influence of electrical part of traction transmission on dynamic characteristics of railway vehicles based on electromechanical coupling model

Dynamic performance of locomotive electric drive system under excitation from gear transmission and wheel-rail interaction

Dynamic Characteristics of a Traction Drive System in High-Speed Train Based on Electromechanical Coupling Modeling under Variable Conditions

Dynamic modelling of locomotive with direct drive traction system considering electromechanical coupling effect

Vibration and dynamics analysis of electric vehicle drivetrains

Dynamic investigation of the electromechanical coupling system in a permanent magnet direct-drive locomotive under rotor eccentricity faults

Vertical dynamics of a pantograph carbon-strip suspension under stochastic contact-force excitation

Research of features of oscillating process’ behavior in the nonlinear system of individual traction drive of an electrobus

Effects of the Dynamic Wheel–rail Interaction on the Ground Vibration Generated by a Moving Train

Optimization and Analysis of New Permanent Magnet Synchronous Motor Used in Traction

Ground Vibration Caused by Axle Load and Dynamic Wheel-Rail Force of a Moving Train

Design and Analysis of the Hybrid Excitation Rail Eddy Brake System of High-Speed Trains

A theoretical study on the high-speed electric tracked vehicle mobility

Superposition of Voltage Disturbances Generated by Direct Current Traction

A Control Scheme for a High Speed Railway Traction System Based on High Power PMSM

Study of Ground Vibration from Trains Caused by Track Irregularities

RESEARCH ON THE MODEL OF ASYNCHRONOUS TRACTION ENGINE OF THE AC ELECTRIC LOCOMOTIVE

Dynamic analysis of traction motor in a locomotive considering surface waviness on races of a motor bearing

Electrical damage mechanism analysis of traction motor bearings on high-speed trains considering overvoltage impulse