Abstract:Abstract Aerostatic bearing is an ultra-precision component that uses a spindle surrounded by a thin film of air. Due to the high accuracy of aerostatic bearing, the demand for these components is very high in electronic, instrumentation, healthcare, and other manufacturing or processing industries. In the present work, the main focused area is on the experimental determination of the effect of roughness parameter on the performance of the aerostatic journal and thrust bearings. To achieve the aim, the aerostatic bearing is designed based on theoretical analysis. The present design is numerically investigated by simulation of airflow in ANSYS Fluent with computational fluid dynamics module. The results from the simulation are validated by the results generated for pressure distribution in previous researches. After performing the finishing on the bearing and spindle surface, the manufactured components are assembled for analysing the variation in radial and axial loads acting on the spindle with the spindle displacement (1-5 μm) in the direction of the load at supply pressures (3-6 bar) in the clearance of 30 μm. For surface improvement of the air bearing, three different techniques are used namely machining, grinding, and magnetorheological finishing. For each roughness reduction technique, the variation in axial and radial loads acting on the spindle is determined with variation in spindle displacement. The experimental results showed the increase in load capacity due to improvement in the surface finish for journal bearing and thrust bearing at 5 μm displacement in the spindle is found to be 0.68 N for machining to grinding and 2.0 N from grinding to magnetorheological finishing respectively. The results determined for the surface finish parameter reveals the effect of surface roughness on the load-carrying capacity of the aerostatic journal and thrust bearing. The current study on the surface finishing of aerostatic bearing is found effective for the applications such as drives in production machines where good grade of surface finish are the major parameters for improving the overall functional efficiency.

Performance of a self-lifting linear air contact

Stiffness Analysis And Levitation Force Control Of Active Magnetic Bearing For A Partially-Self-Bearing Flywheel System

The Simulation Study of a New-Type Frictionless Pneumatic Cylinder

Modelling and experimental validation of dynamic characteristics of porous-walled air film for non-contact conveyor system

Running Performance of a Squeeze Film Air Bearing with Flexure Pivot Tilting Pad

Investigating The Effect of Surface Finishing On Performance of Designed Aerostatic Bearing For Its Improved Precision Applications

Performance Of An Active Electric Bearing For Rotary Micromotors

Aerostatic thrust bearing performances analysis considering the fluid-structure coupling effect

Squeeze-Film Air Damping of a Five-Axis Electrostatic Bearing for Rotary Micromotors

Analysis on Load Carrying Characteristics of Lubricating Film for Sliding Bearing Lubricated with Ferrofluid

A New Method Based FEMLAB to Predict Static Performance of Air Bearing

Influence of Cavitation Pressure on Performance of Sliding Bearings

Experimental study on the influence of flexible structure and gas supply method on the characteristics of aerostatic tilting-pad bearing

Lubrication mechanism and characteristics of aerostatic bearing with close-spaced micro holes

Experimental Force Coefficients of a Hydrostatic Thrust Bearing and Comparisons to Predictions

Initial levitation of an electrostatic bearing system without bias

Numerical Investigation of the Performance of Aerostatic Journal Bearings

Performance of Non-Contact Linear Actuators Driven by Surface Acoustic Waves

Analysis of flow field characteristics of multi-degree-of-freedom motor with air-floatation

Parallel surface squeeze film bearing using ferrofluid lubricant controlled by transverse magnetic fields

An Air Suspension to Demonstrate the Properties of Torsion Balances with Fibres of Zero Length