Abstract:The energy needs of the modern world currently relies heavily on fossil fuels and energy conversion technologies that emit greenhouse gases (GHGs). These GHGs have been shown to have a detrimental impact on global climate. Climate change has created a vital shift in the way society thinks about energy conversion and storage. Today we are seeing huge increase in the demand for utilization of renewable energy sources (solar, wind, and etc.) as well as in their integration with zero-carbon emission energy conversion and storage devices such as fuel cells, water electrolyzers, and batteries. The renewable energy sources are intermittent by nature since the wind does not always blow and the sun does not always shine. This creates a need for a way to store excess green energy that would otherwise be wasted when the demand does not meet the production. Development of advanced Proton Exchange Membrane (PEM) water electrolyzers and fuel cells that can be integrated with renewable energy sources to convert the excess electricity to hydrogen, is the most efficient approach for sustainable energy storage and utilization. Development of such sustainable energy systems is of primary importance for implementation and widespread application of the green energy technologies in our everyday life and elimination of the GHG emissions. Low temperature Polymer Electrolyte Membrane Fuel Cells (PEMFC) are the most promising type of fuel cells for application in the transportation sector. Currently, the commercialization of these devices is hindered by their high cost and limited durability. Further research is needed to increase their efficiency, power output, catalyst utilization, and durability. Fabrication of thinner proton conductive membranes, is one of the strategies that are of particular research interest. Successful development of thinner PFSA membranes will result in reduction of the ohmic resistance of the MEAs, cost reduction, and will improve their performance. Fabrication of thinner PEM membrane is a challenging task that requires innovative engineering approaches that will allow to fabricate ultra-thin, pinhole free membranes with the desired mechanical stability and hydrogen crossover suppression properties. This work aims on development of novel approaches for engineering ultra-thin PEM membranes with thicknesses below 10μm, and to perform a systematic study of the membrane thickness impact on the MEAs cost, activity, and durability performance. In addition, the effect of various reinforcement materials on the membrane properties have been studied, and their optimal concentrations and position in the volume of the membrane has been investigated. All PEM membranes of interest have been fabricated with a state-of-the-art ultrasonic spray deposition method, designed, and developed at UConn. This methodology allows for precise control of the thickness and composition of the thin membranes, as well as of the thickness, composition, and precious metal loading in the catalysts layers. The newly designed MEAs have been tested at real fuel cell operating conditions, and the results will be presented and discussed in detail at the 243 rd ECS meeting in Boston, MA.

The Development of New Membranes for Proton Exchange Membrane Fuel Cells

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Membranes from sulfonated block copolymer for use in proton exchange membrane fuel cells

Fuel 109-New Proton Conductive Composite Materials with Inorganic and Styrene Grafted and Sulfonated Vdf/Ctfe Fluoropolymers

Development of Study on Novel Proton Exchange Membranes for Fuel Cell

Pore-Filling Type Proton Exchange Membrane for Fuel Cells

Novel Strategy for Engineering Ultra-Thin Proton Exchange Membranes for Advanced PEM Fuel Cells

Investigation on Structure and Behaviours of Proton Exchange Membrane Materials by TEM

Recent Developments on Alternative Proton Exchange Membranes: Strategies for Systematic Performance Improvement

Direct Synthesis of Sulfonated Aromatic Poly(ether Ether Ketone) Proton Exchange Membranes for Fuel Cell Applications

Sulfonated poly(arylene ether)s based proton exchange membranes for fuel cells

Developments of Highly Proton-Conductive Sulfonated Polymers for Proton Exchange Membrane Fuel Cells

Novel Proton Exchange Membrane with Long-Range Acid–Base-Pair Proton Transfer Pathways Based on Functionalized Polyethyleneimine

A Robust Composite Proton Exchange Membrane of Sulfonated Poly (Fluorenyl Ether Ketone) with an Electrospun Polyimide Mat for Direct Methanol Fuel Cells Application

Preparation of sulfonated poly(ether ether ketone)s containing amino groups/epoxy resin composite membranes and their in situ crosslinking for application in fuel cells

Development of robust proton exchange membranes using sPVA-Silica composite with different crosslinkers and evaluation of their fuel cell performance

Advancements in proton exchange membranes for high-performance high-temperature proton exchange membrane fuel cells (HT-PEMFC)

Sulfonated Hydrocarbon Membranes for Medium-Temperature and Low-Humidity Proton Exchange Membrane Fuel Cells (Pemfcs)

Influence of structure construction on water uptake, swelling, and oxidation stability of proton exchange membranes

Novel, Fluorine-Free Membranes Based on Sulfonated Polyvinyl Alcohol and Poly(ether-block-amide) with Sulfonated Montmorillonite Nanofiller for PEMFC Applications

Research Progress in Proton Exchange Membranes for Fuel Cells